scott/InfiniTime
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases 1 Wiki Activity
InfiniTime/src/CMakeLists.txt

1142 lines
55 KiB
CMake
Raw Normal View History

Set minimum version of cmake to 3.10
2020-01-18 14:52:33 -05:00
cmake_minimum_required(VERSION 3.10)
Initial commit
2019-11-17 14:47:04 -05:00
project(pinetime-app C CXX ASM)
Refactored src/CMakelist to support C++14 and cleanup up redundant/incorrect -std= directives
2021-03-03 10:27:32 -05:00
Initial commit
2019-11-17 14:47:04 -05:00
# define some variables just for this example to determine file locations
set(NRF_PROJECT_NAME pinetime-app)
set(NRF_BOARD pca10040)
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
# check if all the necessary tools paths have been provided.
if (NOT NRF5_SDK_PATH)
CMake: Fix indentation
2022-05-10 16:17:18 -04:00
message(FATAL_ERROR "The path to the nRF5 SDK (NRF5_SDK_PATH) must be set.")
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
endif ()
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
if (DEFINED ARM_NONE_EABI_TOOLCHAIN_PATH)
CMake: Fix indentation
2022-05-10 16:17:18 -04:00
set(ARM_NONE_EABI_TOOLCHAIN_BIN_PATH ${ARM_NONE_EABI_TOOLCHAIN_PATH}/bin)
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
endif ()
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
if (NOT NRF_TARGET MATCHES "nrf52")
CMake: Fix indentation
2022-05-10 16:17:18 -04:00
message(FATAL_ERROR "Only rRF52 boards are supported right now")
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
endif ()
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
# Setup toolchain
include(${CMAKE_SOURCE_DIR}/cmake-nRF5x/arm-gcc-toolchain.cmake)
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
if (NOT DEFINED ARM_GCC_TOOLCHAIN)
CMake: Fix indentation
2022-05-10 16:17:18 -04:00
message(FATAL_ERROR "The toolchain must be set up before calling this macro")
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
endif ()
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
set(CMAKE_OSX_SYSROOT "/")
set(CMAKE_OSX_DEPLOYMENT_TARGET "")
set(SDK_SOURCE_FILES
# Startup
"${NRF5_SDK_PATH}/modules/nrfx/mdk/system_nrf52.c"
"${NRF5_SDK_PATH}/modules/nrfx/mdk/gcc_startup_nrf52.S"
# Base SDK
"${NRF5_SDK_PATH}/components/boards/boards.c"
"${NRF5_SDK_PATH}/integration/nrfx/legacy/nrf_drv_clock.c"
add non-blocking motor controller
2021-01-15 22:11:53 -05:00
"${NRF5_SDK_PATH}/integration/nrfx/legacy/nrf_drv_clock.h"
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
"${NRF5_SDK_PATH}/modules/nrfx/drivers/src/nrfx_clock.c"
"${NRF5_SDK_PATH}/modules/nrfx/drivers/src/nrfx_gpiote.c"
"${NRF5_SDK_PATH}/modules/nrfx/soc/nrfx_atomic.c"
"${NRF5_SDK_PATH}/modules/nrfx/drivers/src/nrfx_saadc.c"
# FreeRTOS
${NRF5_SDK_PATH}/external/freertos/source/croutine.c
${NRF5_SDK_PATH}/external/freertos/source/event_groups.c
Fix/Workaround a memory leak each time a device connects to BLE.
2020-07-11 14:50:40 -04:00
${NRF5_SDK_PATH}/external/freertos/source/portable/MemMang/heap_4.c
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
${NRF5_SDK_PATH}/external/freertos/source/list.c
${NRF5_SDK_PATH}/external/freertos/source/queue.c
${NRF5_SDK_PATH}/external/freertos/source/stream_buffer.c
${NRF5_SDK_PATH}/external/freertos/source/tasks.c
${NRF5_SDK_PATH}/external/freertos/source/timers.c
# Libs
"${NRF5_SDK_PATH}/components/libraries/atomic/nrf_atomic.c"
"${NRF5_SDK_PATH}/components/libraries/balloc/nrf_balloc.c"
"${NRF5_SDK_PATH}/components/libraries/util/nrf_assert.c"
"${NRF5_SDK_PATH}/components/libraries/util/app_error.c"
"${NRF5_SDK_PATH}/components/libraries/util/app_error_weak.c"
"${NRF5_SDK_PATH}/components/libraries/util/app_error_handler_gcc.c"
"${NRF5_SDK_PATH}/components/libraries/util/app_util_platform.c"
"${NRF5_SDK_PATH}/components/libraries/log/src/nrf_log_backend_rtt.c"
"${NRF5_SDK_PATH}/components/libraries/log/src/nrf_log_backend_serial.c"
"${NRF5_SDK_PATH}/components/libraries/log/src/nrf_log_default_backends.c"
"${NRF5_SDK_PATH}/components/libraries/log/src/nrf_log_frontend.c"
"${NRF5_SDK_PATH}/components/libraries/log/src/nrf_log_str_formatter.c"
"${NRF5_SDK_PATH}/components/libraries/memobj/nrf_memobj.c"
"${NRF5_SDK_PATH}/components/libraries/ringbuf/nrf_ringbuf.c"
"${NRF5_SDK_PATH}/components/libraries/strerror/nrf_strerror.c"
# Segger RTT
"${NRF5_SDK_PATH}/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c"
"${NRF5_SDK_PATH}/external/segger_rtt/SEGGER_RTT.c"
"${NRF5_SDK_PATH}/external/segger_rtt/SEGGER_RTT_printf.c"
# Other
"${NRF5_SDK_PATH}/external/utf_converter/utf.c"
"${NRF5_SDK_PATH}/external/fprintf/nrf_fprintf.c"
"${NRF5_SDK_PATH}/external/fprintf/nrf_fprintf_format.c"
# TWI
TwiMaster is now based on the NRFX TWI driver, as it handles more edge cases and workarounds for errors on the bus. Reset the TWI bus after the soft-reset of the motion sensor to workaround issues on the TWI bus.
2021-04-08 14:07:24 -04:00
"${NRF5_SDK_PATH}/modules/nrfx/drivers/src/nrfx_twim.c"
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
# GPIOTE
"${NRF5_SDK_PATH}/components/libraries/gpiote/app_gpiote.c"
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
)
First quick'n'dirty integration of LittleVGL. Needs some cleaning.
2020-02-08 12:01:02 -05:00
Integration of nimble, work in progress. Advertising is working.
2020-04-19 14:44:59 -04:00
set(TINYCRYPT_SRC
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
libs/mynewt-nimble/ext/tinycrypt/src/aes_encrypt.c
libs/mynewt-nimble/ext/tinycrypt/src/utils.c
WIP Refactor ble advertising Refactor ble advertising based on ble standards and conventions. Changes are based on the bleprph example code, bluetooth docs, and nimble docs.
2021-08-29 16:50:04 -04:00
libs/mynewt-nimble/ext/tinycrypt/src/cmac_mode.c
libs/mynewt-nimble/ext/tinycrypt/src/ecc.c
libs/mynewt-nimble/ext/tinycrypt/src/ecc_dh.c
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
)
Integration of nimble, work in progress. Advertising is working.
2020-04-19 14:44:59 -04:00
set(NIMBLE_SRC
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
libs/mynewt-nimble/porting/npl/freertos/src/nimble_port_freertos.c
libs/mynewt-nimble/porting/npl/freertos/src/npl_os_freertos.c
libs/mynewt-nimble/nimble/host/src/ble_hs.c
libs/mynewt-nimble/nimble/host/src/ble_hs_hci_evt.c
libs/mynewt-nimble/nimble/host/src/ble_l2cap_sig_cmd.c
libs/mynewt-nimble/nimble/host/src/ble_l2cap_sig.c
libs/mynewt-nimble/nimble/host/src/ble_l2cap.c
libs/mynewt-nimble/nimble/host/src/ble_hs_mbuf.c
libs/mynewt-nimble/nimble/host/src/ble_sm.c
WIP Refactor ble advertising Refactor ble advertising based on ble standards and conventions. Changes are based on the bleprph example code, bluetooth docs, and nimble docs.
2021-08-29 16:50:04 -04:00
libs/mynewt-nimble/nimble/host/src/ble_sm_cmd.c
libs/mynewt-nimble/nimble/host/src/ble_sm_lgcy.c
libs/mynewt-nimble/nimble/host/src/ble_sm_alg.c
libs/mynewt-nimble/nimble/host/src/ble_sm_sc.c
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
libs/mynewt-nimble/nimble/host/src/ble_gap.c
libs/mynewt-nimble/nimble/host/src/ble_gatts.c
libs/mynewt-nimble/nimble/host/src/ble_gattc.c
libs/mynewt-nimble/nimble/host/src/ble_hs_conn.c
libs/mynewt-nimble/nimble/host/src/ble_att_svr.c
libs/mynewt-nimble/nimble/host/src/ble_store.c
libs/mynewt-nimble/nimble/host/src/ble_store_util.c
libs/mynewt-nimble/nimble/host/src/ble_hs_pvcy.c
libs/mynewt-nimble/nimble/host/src/ble_hs_hci.c
libs/mynewt-nimble/nimble/host/src/ble_hs_log.c
libs/mynewt-nimble/nimble/host/src/ble_hs_hci_util.c
libs/mynewt-nimble/nimble/host/src/ble_hs_hci_cmd.c
libs/mynewt-nimble/nimble/host/src/ble_hs_cfg.c
libs/mynewt-nimble/nimble/host/src/ble_uuid.c
libs/mynewt-nimble/nimble/host/src/ble_hs_id.c
libs/mynewt-nimble/nimble/host/src/ble_hs_misc.c
libs/mynewt-nimble/nimble/host/src/ble_att.c
libs/mynewt-nimble/nimble/host/src/ble_att_clt.c
libs/mynewt-nimble/nimble/host/src/ble_att_svr.c
libs/mynewt-nimble/nimble/host/src/ble_att_cmd.c
libs/mynewt-nimble/nimble/host/src/ble_hs_atomic.c
libs/mynewt-nimble/nimble/host/src/ble_hs_adv.c
libs/mynewt-nimble/nimble/host/src/ble_hs_flow.c
libs/mynewt-nimble/nimble/host/src/ble_hs_mqueue.c
libs/mynewt-nimble/nimble/host/src/ble_hs_stop.c
libs/mynewt-nimble/nimble/host/src/ble_hs_startup.c
libs/mynewt-nimble/nimble/host/store/ram/src/ble_store_ram.c
libs/mynewt-nimble/nimble/host/src/ble_monitor.c
libs/mynewt-nimble/nimble/transport/ram/src/ble_hci_ram.c
libs/mynewt-nimble/nimble/controller/src/ble_ll.c
libs/mynewt-nimble/nimble/controller/src/ble_ll_rand.c
libs/mynewt-nimble/nimble/controller/src/ble_ll_conn.c
libs/mynewt-nimble/nimble/controller/src/ble_ll_ctrl.c
libs/mynewt-nimble/nimble/controller/src/ble_ll_hci.c
libs/mynewt-nimble/nimble/controller/src/ble_ll_conn_hci.c
libs/mynewt-nimble/nimble/controller/src/ble_ll_utils.c
libs/mynewt-nimble/nimble/controller/src/ble_ll_scan.c
libs/mynewt-nimble/nimble/controller/src/ble_ll_whitelist.c
libs/mynewt-nimble/nimble/controller/src/ble_ll_adv.c
libs/mynewt-nimble/nimble/controller/src/ble_ll_sched.c
libs/mynewt-nimble/nimble/controller/src/ble_ll_supp_cmd.c
libs/mynewt-nimble/nimble/controller/src/ble_ll_hci_ev.c
libs/mynewt-nimble/nimble/controller/src/ble_ll_rfmgmt.c
Connect and bond with a passkey This commit adds the following: Passkey pairing - passkey is displayed on watch Swipe down to clear passkey screen Connection encryption Connection bonding Automatic reconnects to a bonded peripheral Trusted device on Android Note that persisting the bond between reboots is NOT included in this commit. Therefore, rebooting the watch will cause reconnect failures. You must delete the bond from the phone to reconnect/pair.
2021-10-30 14:02:39 -04:00
libs/mynewt-nimble/nimble/controller/src/ble_ll_resolv.c
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
libs/mynewt-nimble/porting/nimble/src/os_cputime.c
libs/mynewt-nimble/porting/nimble/src/os_cputime_pwr2.c
libs/mynewt-nimble/porting/nimble/src/os_mbuf.c
libs/mynewt-nimble/porting/nimble/src/os_mempool.c
libs/mynewt-nimble/porting/nimble/src/hal_timer.c
libs/mynewt-nimble/porting/nimble/src/mem.c
libs/mynewt-nimble/porting/nimble/src/endian.c
libs/mynewt-nimble/porting/nimble/src/os_msys_init.c
libs/mynewt-nimble/nimble/drivers/nrf52/src/ble_hw.c
libs/mynewt-nimble/nimble/drivers/nrf52/src/ble_phy.c
libs/mynewt-nimble/nimble/host/services/gap/src/ble_svc_gap.c
libs/mynewt-nimble/nimble/host/services/gatt/src/ble_svc_gatt.c
libs/mynewt-nimble/nimble/host/util/src/addr.c
)
Integration of nimble, work in progress. Advertising is working.
2020-04-19 14:44:59 -04:00
Using littlefs (#438) * add submodule littlefs * base fs * Save settings using littlefs * Small fixes and suggestions from PR * More small fixes from PR suggestions * Code clean up * Change SpiNorFlash functions to be private in FS
2021-07-11 09:06:06 -04:00
set(LITTLEFS_SRC
libs/littlefs/lfs_util.h
libs/littlefs/lfs.h
libs/littlefs/lfs_util.c
libs/littlefs/lfs.c
)
First quick'n'dirty integration of LittleVGL. Needs some cleaning.
2020-02-08 12:01:02 -05:00
set(LVGL_SRC
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
libs/lv_conf.h
libs/lvgl/lvgl.h
LVGL v7.10.0
2021-01-28 12:13:28 -05:00
libs/lvgl/src/lvgl.h
libs/lvgl/src/lv_api_map.h
libs/lvgl/src/lv_conf_internal.h
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
libs/lvgl/src/lv_core/lv_disp.h
LVGL v7.10.0
2021-01-28 12:13:28 -05:00
libs/lvgl/src/lv_core/lv_group.h
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
libs/lvgl/src/lv_core/lv_indev.h
LVGL v7.10.0
2021-01-28 12:13:28 -05:00
libs/lvgl/src/lv_core/lv_obj.h
libs/lvgl/src/lv_core/lv_obj_style_dec.h
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
libs/lvgl/src/lv_core/lv_refr.h
libs/lvgl/src/lv_core/lv_style.h
LVGL v7.10.0
2021-01-28 12:13:28 -05:00
libs/lvgl/src/lv_draw/lv_draw.h
libs/lvgl/src/lv_draw/lv_draw_arc.h
libs/lvgl/src/lv_draw/lv_draw_blend.h
libs/lvgl/src/lv_draw/lv_draw_img.h
libs/lvgl/src/lv_draw/lv_draw_label.h
libs/lvgl/src/lv_draw/lv_draw_line.h
libs/lvgl/src/lv_draw/lv_draw_mask.h
libs/lvgl/src/lv_draw/lv_draw_rect.h
libs/lvgl/src/lv_draw/lv_draw_triangle.h
libs/lvgl/src/lv_draw/lv_img_buf.h
libs/lvgl/src/lv_draw/lv_img_cache.h
libs/lvgl/src/lv_draw/lv_img_decoder.h
libs/lvgl/src/lv_font/lv_font.h
libs/lvgl/src/lv_font/lv_font_fmt_txt.h
libs/lvgl/src/lv_font/lv_font_loader.h
libs/lvgl/src/lv_font/lv_symbol_def.h
libs/lvgl/src/lv_hal/lv_hal.h
libs/lvgl/src/lv_hal/lv_hal_disp.h
libs/lvgl/src/lv_hal/lv_hal_indev.h
libs/lvgl/src/lv_hal/lv_hal_tick.h
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
libs/lvgl/src/lv_misc/lv_anim.h
libs/lvgl/src/lv_misc/lv_area.h
LVGL v7.10.0
2021-01-28 12:13:28 -05:00
libs/lvgl/src/lv_misc/lv_async.h
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
libs/lvgl/src/lv_misc/lv_bidi.h
libs/lvgl/src/lv_misc/lv_color.h
LVGL v7.10.0
2021-01-28 12:13:28 -05:00
libs/lvgl/src/lv_misc/lv_debug.h
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
libs/lvgl/src/lv_misc/lv_fs.h
libs/lvgl/src/lv_misc/lv_gc.h
libs/lvgl/src/lv_misc/lv_ll.h
libs/lvgl/src/lv_misc/lv_log.h
libs/lvgl/src/lv_misc/lv_math.h
libs/lvgl/src/lv_misc/lv_mem.h
libs/lvgl/src/lv_misc/lv_printf.h
libs/lvgl/src/lv_misc/lv_task.h
libs/lvgl/src/lv_misc/lv_templ.h
libs/lvgl/src/lv_misc/lv_txt.h
LVGL v7.10.0
2021-01-28 12:13:28 -05:00
libs/lvgl/src/lv_misc/lv_txt_ap.h
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
libs/lvgl/src/lv_misc/lv_types.h
libs/lvgl/src/lv_misc/lv_utils.h
LVGL v7.10.0
2021-01-28 12:13:28 -05:00
libs/lvgl/src/lv_themes/lv_theme.h
libs/lvgl/src/lv_themes/lv_theme_empty.h
libs/lvgl/src/lv_themes/lv_theme_material.h
#libs/lvgl/src/lv_themes/lv_theme_mono.h
#libs/lvgl/src/lv_themes/lv_theme_template.h
libs/lvgl/src/lv_widgets/lv_arc.h
libs/lvgl/src/lv_widgets/lv_bar.h
libs/lvgl/src/lv_widgets/lv_btn.h
libs/lvgl/src/lv_widgets/lv_btnmatrix.h
libs/lvgl/src/lv_widgets/lv_calendar.h
libs/lvgl/src/lv_widgets/lv_canvas.h
libs/lvgl/src/lv_widgets/lv_chart.h
libs/lvgl/src/lv_widgets/lv_checkbox.h
libs/lvgl/src/lv_widgets/lv_cont.h
libs/lvgl/src/lv_widgets/lv_cpicker.h
libs/lvgl/src/lv_widgets/lv_dropdown.h
Add PineTimeStyle watchface (#334) * PineTimeStyle * Move GPL license header * Add step count gauge - replaces heartrate in sidebar * Enable 12/24h functionality * Set step gauge outer to be white when step goal is reached * Add font source file * Move static needle_colors array to member variable * Add documentation on generating a font * Replace .ttf with Google version, add link to font page Co-authored-by: JF002 <JF002@users.noreply.github.com>
2021-06-29 14:20:27 -04:00
libs/lvgl/src/lv_widgets/lv_gauge.h
LVGL v7.10.0
2021-01-28 12:13:28 -05:00
libs/lvgl/src/lv_widgets/lv_img.h
libs/lvgl/src/lv_widgets/lv_imgbtn.h
libs/lvgl/src/lv_widgets/lv_keyboard.h
libs/lvgl/src/lv_widgets/lv_label.h
libs/lvgl/src/lv_widgets/lv_led.h
libs/lvgl/src/lv_widgets/lv_line.h
libs/lvgl/src/lv_widgets/lv_linemeter.h
libs/lvgl/src/lv_widgets/lv_list.h
libs/lvgl/src/lv_widgets/lv_msgbox.h
libs/lvgl/src/lv_widgets/lv_objmask.h
libs/lvgl/src/lv_widgets/lv_objx_templ.h
libs/lvgl/src/lv_widgets/lv_page.h
libs/lvgl/src/lv_widgets/lv_roller.h
libs/lvgl/src/lv_widgets/lv_slider.h
libs/lvgl/src/lv_widgets/lv_spinbox.h
libs/lvgl/src/lv_widgets/lv_spinner.h
libs/lvgl/src/lv_widgets/lv_switch.h
libs/lvgl/src/lv_widgets/lv_table.h
libs/lvgl/src/lv_widgets/lv_tabview.h
libs/lvgl/src/lv_widgets/lv_textarea.h
libs/lvgl/src/lv_widgets/lv_tileview.h
libs/lvgl/src/lv_widgets/lv_win.h
libs/lvgl/src/lv_core/lv_disp.c
libs/lvgl/src/lv_core/lv_group.c
libs/lvgl/src/lv_core/lv_indev.c
libs/lvgl/src/lv_core/lv_obj.c
libs/lvgl/src/lv_core/lv_refr.c
libs/lvgl/src/lv_core/lv_style.c
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
libs/lvgl/src/lv_draw/lv_draw_arc.c
LVGL v7.10.0
2021-01-28 12:13:28 -05:00
libs/lvgl/src/lv_draw/lv_draw_blend.c
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
libs/lvgl/src/lv_draw/lv_draw_img.c
libs/lvgl/src/lv_draw/lv_draw_label.c
libs/lvgl/src/lv_draw/lv_draw_line.c
LVGL v7.10.0
2021-01-28 12:13:28 -05:00
libs/lvgl/src/lv_draw/lv_draw_mask.c
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
libs/lvgl/src/lv_draw/lv_draw_rect.c
libs/lvgl/src/lv_draw/lv_draw_triangle.c
LVGL v7.10.0
2021-01-28 12:13:28 -05:00
libs/lvgl/src/lv_draw/lv_img_buf.c
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
libs/lvgl/src/lv_draw/lv_img_cache.c
libs/lvgl/src/lv_draw/lv_img_decoder.c
LVGL v7.10.0
2021-01-28 12:13:28 -05:00
libs/lvgl/src/lv_font/lv_font.c
#libs/lvgl/src/lv_font/lv_font_dejavu_16_persian_hebrew.c
libs/lvgl/src/lv_font/lv_font_fmt_txt.c
libs/lvgl/src/lv_font/lv_font_loader.c
# LVGL Fonts
libs/lvgl/src/lv_font/lv_font_montserrat_14.c
libs/lvgl/src/lv_font/lv_font_montserrat_18.c
libs/lvgl/src/lv_font/lv_font_montserrat_22.c
libs/lvgl/src/lv_font/lv_font_montserrat_28.c
#
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
libs/lvgl/src/lv_hal/lv_hal_disp.c
libs/lvgl/src/lv_hal/lv_hal_indev.c
libs/lvgl/src/lv_hal/lv_hal_tick.c
LVGL v7.10.0
2021-01-28 12:13:28 -05:00
libs/lvgl/src/lv_misc/lv_anim.c
libs/lvgl/src/lv_misc/lv_area.c
libs/lvgl/src/lv_misc/lv_async.c
libs/lvgl/src/lv_misc/lv_bidi.c
libs/lvgl/src/lv_misc/lv_color.c
libs/lvgl/src/lv_misc/lv_debug.c
libs/lvgl/src/lv_misc/lv_fs.c
libs/lvgl/src/lv_misc/lv_gc.c
libs/lvgl/src/lv_misc/lv_ll.c
libs/lvgl/src/lv_misc/lv_log.c
libs/lvgl/src/lv_misc/lv_math.c
libs/lvgl/src/lv_misc/lv_mem.c
libs/lvgl/src/lv_misc/lv_printf.c
libs/lvgl/src/lv_misc/lv_task.c
libs/lvgl/src/lv_misc/lv_templ.c
libs/lvgl/src/lv_misc/lv_txt.c
libs/lvgl/src/lv_misc/lv_txt_ap.c
libs/lvgl/src/lv_misc/lv_utils.c
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
libs/lvgl/src/lv_themes/lv_theme.c
LVGL v7.10.0
2021-01-28 12:13:28 -05:00
libs/lvgl/src/lv_themes/lv_theme_empty.c
libs/lvgl/src/lv_themes/lv_theme_material.c
#libs/lvgl/src/lv_themes/lv_theme_mono.c
#libs/lvgl/src/lv_themes/lv_theme_template.c
libs/lvgl/src/lv_widgets/lv_arc.c
libs/lvgl/src/lv_widgets/lv_bar.c
libs/lvgl/src/lv_widgets/lv_btn.c
libs/lvgl/src/lv_widgets/lv_btnmatrix.c
libs/lvgl/src/lv_widgets/lv_calendar.c
libs/lvgl/src/lv_widgets/lv_canvas.c
libs/lvgl/src/lv_widgets/lv_chart.c
libs/lvgl/src/lv_widgets/lv_checkbox.c
libs/lvgl/src/lv_widgets/lv_cont.c
libs/lvgl/src/lv_widgets/lv_cpicker.c
libs/lvgl/src/lv_widgets/lv_dropdown.c
Add PineTimeStyle watchface (#334) * PineTimeStyle * Move GPL license header * Add step count gauge - replaces heartrate in sidebar * Enable 12/24h functionality * Set step gauge outer to be white when step goal is reached * Add font source file * Move static needle_colors array to member variable * Add documentation on generating a font * Replace .ttf with Google version, add link to font page Co-authored-by: JF002 <JF002@users.noreply.github.com>
2021-06-29 14:20:27 -04:00
libs/lvgl/src/lv_widgets/lv_gauge.c
LVGL v7.10.0
2021-01-28 12:13:28 -05:00
libs/lvgl/src/lv_widgets/lv_img.c
libs/lvgl/src/lv_widgets/lv_imgbtn.c
libs/lvgl/src/lv_widgets/lv_keyboard.c
libs/lvgl/src/lv_widgets/lv_label.c
libs/lvgl/src/lv_widgets/lv_led.c
libs/lvgl/src/lv_widgets/lv_line.c
libs/lvgl/src/lv_widgets/lv_linemeter.c
libs/lvgl/src/lv_widgets/lv_list.c
libs/lvgl/src/lv_widgets/lv_msgbox.c
libs/lvgl/src/lv_widgets/lv_objmask.c
libs/lvgl/src/lv_widgets/lv_objx_templ.c
libs/lvgl/src/lv_widgets/lv_page.c
libs/lvgl/src/lv_widgets/lv_roller.c
libs/lvgl/src/lv_widgets/lv_slider.c
libs/lvgl/src/lv_widgets/lv_spinbox.c
libs/lvgl/src/lv_widgets/lv_spinner.c
libs/lvgl/src/lv_widgets/lv_switch.c
libs/lvgl/src/lv_widgets/lv_table.c
libs/lvgl/src/lv_widgets/lv_tabview.c
libs/lvgl/src/lv_widgets/lv_textarea.c
libs/lvgl/src/lv_widgets/lv_tileview.c
libs/lvgl/src/lv_widgets/lv_win.c
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
)
Initial commit
2019-11-17 14:47:04 -05:00
Added QCBOR dependency
2021-05-17 06:57:21 -04:00
set(QCBOR_SRC
libs/QCBOR/src/ieee754.c
libs/QCBOR/src/qcbor_decode.c
libs/QCBOR/src/qcbor_encode.c
libs/QCBOR/src/qcbor_err_to_str.c
libs/QCBOR/src/UsefulBuf.c
)
Display battery level and BLE connection status using icon on Clock screen.
2020-03-14 11:33:47 -04:00
list(APPEND IMAGE_FILES
New sharper batteryicon. Remove old unused batteryicons
2022-04-07 10:28:04 -04:00
displayapp/icons/battery/batteryicon.c
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
)
Initial commit
2019-11-17 14:47:04 -05:00
list(APPEND SOURCE_FILES
Disable sleep mode on the SPI NOR Flash when the version is unknown. This is because the current bootloader (which does not exposes its version) cannot initialize the chip when it's in sleep mode. This feature will be re-enabled when the bootloader expses it's version.
2020-10-27 14:38:45 -04:00
BootloaderVersion.cpp
Renamed Logging/ to logging/
2020-10-02 14:45:51 -04:00
logging/NrfLogger.cpp
Renamed DisplayApp/ to displayapp/
2020-10-02 14:46:41 -04:00
displayapp/DisplayApp.cpp
Renamed displayapp/Screens to displayapp/screens
2020-10-02 14:49:55 -04:00
displayapp/screens/Screen.cpp
displayapp/screens/Clock.cpp
displayapp/screens/Tile.cpp
displayapp/screens/InfiniPaint.cpp
Addition of new files in MakeList added Paddle.cpp and Paddle.h
2020-12-03 09:16:36 -05:00
displayapp/screens/Paddle.cpp
Basic logic done. Need to change the timer source to get ms. Also need to replace with paddle app in displayApp.cpp and ApplicationList.cpp later.
2021-03-11 04:54:14 -05:00
displayapp/screens/StopWatch.cpp
Renamed displayapp/Screens to displayapp/screens
2020-10-02 14:49:55 -04:00
displayapp/screens/BatteryIcon.cpp
displayapp/screens/BleIcon.cpp
Integrate new notification UI with notifications coming from BLE
2020-10-20 14:57:39 -04:00
displayapp/screens/NotificationIcon.cpp
Renamed displayapp/Screens to displayapp/screens
2020-10-02 14:49:55 -04:00
displayapp/screens/SystemInfo.cpp
displayapp/screens/Label.cpp
displayapp/screens/FirmwareUpdate.cpp
displayapp/screens/Music.cpp
Tidied up and added Weather to CMakeLists.txt
2021-06-09 17:45:39 -04:00
displayapp/screens/Weather.cpp
Merge branch piggz/nav into develop: - fix conflict - add a icon for the navigation app.
2021-01-20 15:34:09 -05:00
displayapp/screens/Navigation.cpp
add basic metronome app (#409) * add basic metronome app * add bpb, tap to bpm, update widgets * use event pressed for bpm tap * move case statement break to the right place * narrow bpm selection range, override touch events * fix arc knob style * re-enable sleeping in destructor
2021-06-12 09:06:58 -04:00
displayapp/screens/Metronome.cpp
Merge branch 'develop' into motion-sensor # Conflicts: # src/CMakeLists.txt # src/displayapp/Apps.h # src/displayapp/DisplayApp.cpp # src/displayapp/DisplayApp.h # src/displayapp/lv_pinetime_theme.c # src/displayapp/screens/ApplicationList.cpp # src/drivers/TwiMaster.cpp # src/systemtask/SystemTask.h
2021-04-09 15:16:21 -04:00
displayapp/screens/Motion.cpp
Renamed displayapp/Screens to displayapp/screens
2020-10-02 14:49:55 -04:00
displayapp/screens/FirmwareValidation.cpp
displayapp/screens/ApplicationList.cpp
[WIP] New notification app that uses software scrolling effect.
2020-10-18 11:35:36 -04:00
displayapp/screens/Notifications.cpp
adds 2048 clone game styles table reads touch events allows moving tiles allows merging tiles improves tile movement allows merging tiles adds score display implements color edit comments adjust game logic disallows double merges
2021-01-02 15:08:12 -05:00
displayapp/screens/Twos.cpp
First implementation of the HR sensor using 100% foss code (ported from waspos)
2021-01-10 11:57:26 -05:00
displayapp/screens/HeartRate.cpp
First integration of the motion sensor (bma 421) : step counting + wake on wrist rotation + app to see the value of the 3 axis in "real time".
2021-03-31 13:47:27 -04:00
displayapp/screens/Motion.cpp
Big UI and navigation Rewrite new navigation add some color to the apps redesign menus new settings menu new quick settings code clean up size reduction by converting navigation images to font and more...
2021-04-03 22:08:51 -04:00
displayapp/screens/FlashLight.cpp
displayapp/screens/List.cpp
displayapp/screens/BatteryInfo.cpp
New Steps app Settings to set the steps goal More detail in Motion app New 42px Font
2021-04-19 10:28:38 -04:00
displayapp/screens/Steps.cpp
Timer App (#355) * built timer app * Style improvements * making sure buttons stay hidden when the app is reopened and reappear after the timer runs out * more sensible calculations of time deltas. eliminated that mysterious scaling factor * changing the timer icon
2021-05-20 14:43:54 -04:00
displayapp/screens/Timer.cpp
Connect and bond with a passkey This commit adds the following: Passkey pairing - passkey is displayed on watch Swipe down to clear passkey screen Connection encryption Connection bonding Automatic reconnects to a bonded peripheral Trusted device on Android Note that persisting the bond between reboots is NOT included in this commit. Therefore, rebooting the watch will cause reconnect failures. You must delete the bond from the phone to reconnect/pair.
2021-10-30 14:02:39 -04:00
displayapp/screens/PassKey.cpp
Automatic error detection
2021-08-18 08:23:30 -04:00
displayapp/screens/Error.cpp
Created basic alarm app
2021-09-10 18:40:13 -04:00
displayapp/screens/Alarm.cpp
Move radio button styling to a single place
2021-09-22 19:53:10 -04:00
displayapp/screens/Styles.cpp
Settings : use enums instead of ints to store colors. Group all PTS settings into a struct. PTS/SettingsPTS : Convert to/from LVGL color and Settings::Color, add functions to reduce code duplication. Adapt SettingPineTimeStyle with the last Screen Interface
2021-08-28 15:02:11 -04:00
displayapp/Colors.cpp
Add initial counter widget
2022-04-21 10:17:49 -04:00
displayapp/widgets/Counter.cpp
Add PageIndicator widget to reduce code duplication (#1218) * Move PageIndicator widget to its own files to reduce code duplication * Use uint8_t in PageIndicator
2022-07-05 01:41:09 -04:00
displayapp/widgets/PageIndicator.cpp
Add status icons widget
2022-07-21 12:27:52 -04:00
displayapp/widgets/StatusIcons.cpp
Big UI and navigation Rewrite new navigation add some color to the apps redesign menus new settings menu new quick settings code clean up size reduction by converting navigation images to font and more...
2021-04-03 22:08:51 -04:00
## Settings
displayapp/screens/settings/QuickSettings.cpp
displayapp/screens/settings/Settings.cpp
displayapp/screens/settings/SettingWatchFace.cpp
displayapp/screens/settings/SettingTimeFormat.cpp
displayapp/screens/settings/SettingWakeUp.cpp
displayapp/screens/settings/SettingDisplay.cpp
New Steps app Settings to set the steps goal More detail in Motion app New 42px Font
2021-04-19 10:28:38 -04:00
displayapp/screens/settings/SettingSteps.cpp
Include new screens in CMakeLists.txt
2021-07-09 08:14:17 -04:00
displayapp/screens/settings/SettingSetDate.cpp
displayapp/screens/settings/SettingSetTime.cpp
Chimes option
2021-11-07 05:50:33 -05:00
displayapp/screens/settings/SettingChimes.cpp
Add start of settings app for senstivity. really just debugging. I want to make it more configurable then high med low. Position of setting needs a new location...dynamicly adding it currently at the end. Which honestly im fine with.
2021-09-26 22:52:02 -04:00
displayapp/screens/settings/SettingShakeThreshold.cpp
Replace airplane mode with a bluetooth toggle
2022-04-02 09:03:20 -04:00
displayapp/screens/settings/SettingBluetooth.cpp
Multi face support, analog clock, 12/24 config
2021-02-24 14:40:24 -05:00
## Watch faces
displayapp/icons/bg_clock.c
displayapp/screens/WatchFaceAnalog.cpp
displayapp/screens/WatchFaceDigital.cpp
Manual squash merge of PR #932 (https://github.com/InfiniTimeOrg/InfiniTime/pull/932) from 13werwolf13 (https://github.com/13werwolf13). This PR adds a new Terminal watchface to InfiniTime! Squashed commit of the following: commit 23ea840b059c69667c8711265cecaf992791acb6 Author: Jean-François Milants <jf@codingfield.com> Date: Sun Feb 20 13:14:27 2022 +0100 Terminal watch face : fix includes and a few code cleaning. commit 3c244def25e3ad8e1f56d708fb0864c122059948 Merge: 40790868 138a6552 Author: Jean-François Milants <jf@codingfield.com> Date: Sun Feb 20 12:45:54 2022 +0100 Merge branch 'develop' of https://github.com/13werwolf13/InfiniTime into 13werwolf13-develop commit 138a65528a86799fd5c37f065023a92f222fe044 Author: Марков Дмитрий <13werwolf13@mail.ru> Date: Wed Feb 2 09:13:00 2022 +0500 Update src/displayapp/screens/WatchFaceTerminal.h Co-authored-by: NeroBurner <pyro4hell@gmail.com> commit 35156166b2f7589bf005ec7c7192a4226578f6d9 Author: Марков Дмитрий <13werwolf13@mail.ru> Date: Wed Feb 2 09:12:43 2022 +0500 Update src/displayapp/screens/WatchFaceTerminal.cpp Co-authored-by: NeroBurner <pyro4hell@gmail.com> commit 757ca2dd438f1f314267a8b81a6034c576f1d6be Author: Марков Дмитрий <13werwolf13@mail.ru> Date: Wed Feb 2 09:12:30 2022 +0500 Update src/displayapp/screens/WatchFaceTerminal.cpp Co-authored-by: NeroBurner <pyro4hell@gmail.com> commit 60b6b4e5824d04faa3efa45173358d04fa68a368 Author: Марков Дмитрий <13werwolf13@mail.ru> Date: Wed Feb 2 09:12:20 2022 +0500 Update src/displayapp/screens/WatchFaceTerminal.cpp Co-authored-by: NeroBurner <pyro4hell@gmail.com> commit 6959d8c043013550a7a3e4e6588b234d3bb942b5 Author: Марков Дмитрий <13werwolf13@mail.ru> Date: Wed Feb 2 09:11:46 2022 +0500 Update src/displayapp/screens/WatchFaceTerminal.cpp Co-authored-by: NeroBurner <pyro4hell@gmail.com> commit 4d850281bedf342d0856da5eafc22e46d0767c56 Author: Марков Дмитрий <13werwolf13@mail.ru> Date: Wed Feb 2 09:11:17 2022 +0500 Update src/displayapp/screens/WatchFaceTerminal.cpp Co-authored-by: NeroBurner <pyro4hell@gmail.com> commit af483bee33c225fcb03432db1eb14c0453df0ae7 Author: Марков Дмитрий <13werwolf13@mail.ru> Date: Wed Feb 2 09:10:57 2022 +0500 Update src/displayapp/screens/WatchFaceTerminal.cpp Co-authored-by: NeroBurner <pyro4hell@gmail.com> commit 6bc6c1a637be4e514ecd0097d1dc9e4aacdba1db Author: Марков Дмитрий <13werwolf13@mail.ru> Date: Wed Feb 2 09:10:40 2022 +0500 Update src/displayapp/screens/WatchFaceTerminal.h Co-authored-by: NeroBurner <pyro4hell@gmail.com> commit 25fdafc6aba0d9e0173103501de3802af261e2ae Author: Марков Дмитрий <13werwolf13@mail.ru> Date: Wed Feb 2 09:06:10 2022 +0500 Update src/displayapp/screens/WatchFaceTerminal.cpp Co-authored-by: NeroBurner <pyro4hell@gmail.com> commit 12e1b0f8c0202a7f62e3e1c297af850ce3526d13 Author: Марков Дмитрий <13werwolf13@mail.ru> Date: Wed Feb 2 09:05:44 2022 +0500 Update src/displayapp/screens/WatchFaceTerminal.cpp Co-authored-by: NeroBurner <pyro4hell@gmail.com> commit e6c0f32056e9fea878d270d761607ac5ddc263b0 Author: Марков Дмитрий <13werwolf13@mail.ru> Date: Wed Feb 2 09:05:22 2022 +0500 Update src/displayapp/screens/WatchFaceTerminal.h Co-authored-by: NeroBurner <pyro4hell@gmail.com> commit 342ce8cd114f4af265078bc0cfa6b2d8831706d7 Author: Марков Дмитрий <13werwolf13@mail.ru> Date: Wed Feb 2 09:05:06 2022 +0500 Update src/displayapp/screens/WatchFaceTerminal.cpp Co-authored-by: NeroBurner <pyro4hell@gmail.com> commit 265fec5eeca27fcc1152a18e4af0273bcf119c46 Author: Марков Дмитрий <13werwolf13@mail.ru> Date: Wed Feb 2 09:04:06 2022 +0500 Update src/displayapp/screens/WatchFaceTerminal.cpp Co-authored-by: NeroBurner <pyro4hell@gmail.com> commit b4669be38be0df2b6a3505d5f7a770c71636be60 Author: Марков Дмитрий <13werwolf13@mail.ru> Date: Wed Feb 2 09:03:29 2022 +0500 Update src/displayapp/screens/WatchFaceTerminal.cpp Co-authored-by: NeroBurner <pyro4hell@gmail.com> commit 471a84390957ded2ac23ebfe1cb99408e3783b0f Author: Марков Дмитрий <13werwolf13@mail.ru> Date: Wed Feb 2 09:03:10 2022 +0500 Update src/displayapp/screens/WatchFaceTerminal.cpp Co-authored-by: NeroBurner <pyro4hell@gmail.com> commit 6853166cf546a4ce561195eba01f1b1fd6d56420 Author: Марков Дмитрий <13werwolf13@mail.ru> Date: Wed Feb 2 09:02:51 2022 +0500 Update src/displayapp/screens/WatchFaceTerminal.cpp Co-authored-by: NeroBurner <pyro4hell@gmail.com> commit bba34f69bfdd6b44f142c93644f71c9eda007290 Author: Дмитрий Марков <13werwolf13@mail.ru> Date: Sat Jan 22 12:32:41 2022 +0500 some fixes commit 74eea9f5800f273249846e6e1c887d15ba6eb10b Author: Дмитрий Марков <13werwolf13@mail.ru> Date: Sat Jan 22 12:32:17 2022 +0500 some fixes commit 1e4a6763d73c3ba39c680ad25f90813e6a6a36d1 Author: Дмитрий Марков <13werwolf13@mail.ru> Date: Fri Jan 21 08:59:44 2022 +0500 no errors, no warnings, no work.. commit eb8bd4dc4ecbbf61f1e0f725fd2116ee25319fd6 Author: Дмитрий Марков <13werwolf13@mail.ru> Date: Thu Jan 20 23:50:04 2022 +0500 add ble state text output commit fda1c088becb4a7f9ced451a0291694abe2249dc Author: Дмитрий Марков <13werwolf13@mail.ru> Date: Thu Jan 20 22:25:35 2022 +0500 add ble state text output commit 68d3d9b343c0f37830bb640fab10b186faf73067 Author: Дмитрий Марков <13werwolf13@mail.ru> Date: Thu Jan 20 22:22:20 2022 +0500 add ble state text output commit 0ed45a9916787f68c0aa6bab9c97b090f2eebdd5 Author: Дмитрий Марков <13werwolf13@mail.ru> Date: Tue Jan 18 15:48:15 2022 +0500 typo fix commit 477a3a7f27c7486be2c8f985afab1f1739608fed Author: Марков Дмитрий <13werwolf13@mail.ru> Date: Tue Jan 18 10:36:19 2022 +0500 Update src/displayapp/screens/WatchFaceTerminal.cpp Co-authored-by: NeroBurner <pyro4hell@gmail.com> commit d6849888ea5cc152f04c5bf6fe2631e66296c357 Author: Марков Дмитрий <13werwolf13@mail.ru> Date: Tue Jan 18 10:36:09 2022 +0500 Update src/displayapp/screens/WatchFaceTerminal.cpp Co-authored-by: NeroBurner <pyro4hell@gmail.com> commit e2f7e318298b8a6f4d436cbbb1b92a738dacab7f Author: Дмитрий Марков <13werwolf13@mail.ru> Date: Mon Jan 17 13:34:05 2022 +0500 typo fix commit fc246beb01d3feac4fd0b2fc9c45b38847e1d950 Author: Дмитрий Марков <13werwolf13@mail.ru> Date: Sat Jan 15 15:26:25 2022 +0500 typo fix commit ebbb31abf10ad9f61a8a7ecfdf29c2aaeaf33c19 Author: Дмитрий Марков <13werwolf13@mail.ru> Date: Fri Jan 14 10:08:29 2022 +0500 typo fix commit 3afedcaa28009f59e6960730e9349097ef455ea8 Author: Дмитрий Марков <13werwolf13@mail.ru> Date: Thu Jan 13 12:34:39 2022 +0500 time format commit 471a4c942f7e3cfd5c52bd61152ede770da5e026 Author: Дмитрий Марков <13werwolf13@mail.ru> Date: Thu Jan 13 12:27:10 2022 +0500 time format commit d3fd348de4b4a89c216a717de84fcc923cc099fe Author: Дмитрий Марков <13werwolf13@mail.ru> Date: Thu Jan 13 12:26:49 2022 +0500 time format commit e540d103e3204649ff585742f8834d16136372d5 Author: Дмитрий Марков <13werwolf13@mail.ru> Date: Thu Jan 13 11:28:31 2022 +0500 add patch commit 728830178f31f71785c49cdc6b83daea4e0a7df6 Author: Дмитрий Марков <13werwolf13@mail.ru> Date: Wed Jan 12 22:08:07 2022 +0500 add menue item commit 4c5847669fa083f15ee3fdb404dadfdaef0f82aa Author: Дмитрий Марков <13werwolf13@mail.ru> Date: Wed Jan 12 21:42:22 2022 +0500 typo fix commit 79273fe24f9162aca5508f07b17896149ad19839 Author: Дмитрий Марков <13werwolf13@mail.ru> Date: Wed Jan 12 20:48:06 2022 +0500 typo fix commit 1808a78ad94d0dfe97b6410a93ba30560de22f4b Author: Дмитрий Марков <13werwolf13@mail.ru> Date: Wed Jan 12 20:17:15 2022 +0500 typo fix commit 6dfa141dca176789da4e978f008eb842d9ec515a Author: Дмитрий Марков <markov@promobit.ru> Date: Wed Jan 12 20:12:09 2022 +0500 typo fix commit 88f01902325505a9206ced4504aae0762042535d Author: Дмитрий Марков <13werwolf13@mail.ru> Date: Wed Jan 12 14:50:54 2022 +0500 add terminal watchface
2022-02-20 07:20:43 -05:00
displayapp/screens/WatchFaceTerminal.cpp
Rename PineTimeStyle to WatchFacePineTimeStyle
2022-03-12 11:55:54 -05:00
displayapp/screens/WatchFacePineTimeStyle.cpp
Multi face support, analog clock, 12/24 config
2021-02-24 14:40:24 -05:00
##
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
main.cpp
drivers/St7789.cpp
drivers/SpiNorFlash.cpp
drivers/SpiMaster.cpp
drivers/Spi.cpp
drivers/Watchdog.cpp
drivers/DebugPins.cpp
drivers/InternalFlash.cpp
First implementation of the HR sensor using 100% foss code (ported from waspos)
2021-01-10 11:57:26 -05:00
drivers/Hrs3300.cpp
First integration of the motion sensor (bma 421) : step counting + wake on wrist rotation + app to see the value of the 3 axis in "real time".
2021-03-31 13:47:27 -04:00
drivers/Bma421.cpp
drivers/Bma421_C/bma4.c
drivers/Bma421_C/bma423.c
Fixed all the includes that were broken due to the renames
2020-10-02 15:16:48 -04:00
components/battery/BatteryController.cpp
components/ble/BleController.cpp
components/ble/NotificationManager.cpp
components/datetime/DateTimeController.cpp
components/brightness/BrightnessController.cpp
First integration of the motion sensor (bma 421) : step counting + wake on wrist rotation + app to see the value of the 3 axis in "real time".
2021-03-31 13:47:27 -04:00
components/motion/MotionController.cpp
Fixed all the includes that were broken due to the renames
2020-10-02 15:16:48 -04:00
components/ble/NimbleController.cpp
components/ble/DeviceInformationService.cpp
components/ble/CurrentTimeClient.cpp
components/ble/AlertNotificationClient.cpp
components/ble/DfuService.cpp
components/ble/CurrentTimeService.cpp
components/ble/AlertNotificationService.cpp
components/ble/MusicService.cpp
Tidied up and added Weather to CMakeLists.txt
2021-06-09 17:45:39 -04:00
components/ble/weather/WeatherService.cpp
Merge branch piggz/nav into develop: - fix conflict - add a icon for the navigation app.
2021-01-20 15:34:09 -05:00
components/ble/NavigationService.cpp
Fixed all the includes that were broken due to the renames
2020-10-02 15:16:48 -04:00
components/ble/BatteryInformationService.cpp
Added Blank FSService that exposes only version info
2021-10-16 21:09:26 -04:00
components/ble/FSService.cpp
Fixed all the includes that were broken due to the renames
2020-10-02 15:16:48 -04:00
components/ble/ImmediateAlertService.cpp
Refactoring of BLE service discovery : it is now implemented into the classes of the services.
2020-10-29 11:06:01 -04:00
components/ble/ServiceDiscovery.cpp
Add heart rate BLE service.
2021-01-17 10:34:14 -05:00
components/ble/HeartRateService.cpp
Add MotionService : expose step count and RAW X/Y/Z values to the host.
2021-10-17 02:23:44 -04:00
components/ble/MotionService.cpp
Fixed all the includes that were broken due to the renames
2020-10-02 15:16:48 -04:00
components/firmwarevalidator/FirmwareValidator.cpp
add motorcontroller to cmake
2021-01-15 22:46:03 -05:00
components/motor/MotorController.cpp
Multi face support, analog clock, 12/24 config
2021-02-24 14:40:24 -05:00
components/settings/Settings.cpp
Timer App (#355) * built timer app * Style improvements * making sure buttons stay hidden when the app is reopened and reappear after the timer runs out * more sensible calculations of time deltas. eliminated that mysterious scaling factor * changing the timer icon
2021-05-20 14:43:54 -04:00
components/timer/TimerController.cpp
Created basic alarm app
2021-09-10 18:40:13 -04:00
components/alarm/AlarmController.cpp
Using littlefs (#438) * add submodule littlefs * base fs * Save settings using littlefs * Small fixes and suggestions from PR * More small fixes from PR suggestions * Code clean up * Change SpiNorFlash functions to be private in FS
2021-07-11 09:06:06 -04:00
components/fs/FS.cpp
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
drivers/Cst816s.cpp
FreeRTOS/port.c
FreeRTOS/port_cmsis_systick.c
FreeRTOS/port_cmsis.c
Renamed DisplayApp/ to displayapp/
2020-10-02 14:46:41 -04:00
displayapp/LittleVgl.cpp
Centralize most color definitions (#1258)
2022-08-16 01:21:23 -04:00
displayapp/InfiniTimeTheme.cpp
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
Renamed SystemTask/ to systemtask/
2020-10-02 14:45:21 -04:00
systemtask/SystemTask.cpp
SystemMonitor: implement FreeRtosMonitor only if trace facility is set Split SystemMonitor into h and cpp file and move the logging code of the `Process` function into the cpp file. Depending of the `configUSE_TRACE_FACILITY` define from `src/FreeRTOSConfig.h` create either a "FreeRtosMonitor" or a "DummyMonitor". Make the `Process()` function non-const, as the FreeRtosMonitor changes the member variable `lastTick`. In `SystemTask.h` we then only need to use `SystemMonitor`, without knowledge of the `configUSE_TRACE_FACILITY` define.
2022-01-27 17:10:59 -05:00
systemtask/SystemMonitor.cpp
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
drivers/TwiMaster.cpp
First implementation of the HR sensor using 100% foss code (ported from waspos)
2021-01-10 11:57:26 -05:00
heartratetask/HeartRateTask.cpp
components/heartrate/Ppg.cpp
components/heartrate/Biquad.cpp
components/heartrate/Ptagc.cpp
components/heartrate/HeartRateController.cpp
New touch handler, with issues
2021-07-15 07:11:27 -04:00
Newer buttonhandler
2021-10-25 05:53:14 -04:00
buttonhandler/ButtonHandler.cpp
New touch handler, with issues
2021-07-15 07:11:27 -04:00
touchhandler/TouchHandler.cpp
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
)
Initial commit
2019-11-17 14:47:04 -05:00
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
list(APPEND RECOVERY_SOURCE_FILES
BootloaderVersion.cpp
logging/NrfLogger.cpp
displayapp/DisplayAppRecovery.cpp
main.cpp
drivers/St7789.cpp
drivers/SpiNorFlash.cpp
drivers/SpiMaster.cpp
drivers/Spi.cpp
drivers/Watchdog.cpp
drivers/DebugPins.cpp
drivers/InternalFlash.cpp
drivers/Hrs3300.cpp
First integration of the motion sensor (bma 421) : step counting + wake on wrist rotation + app to see the value of the 3 axis in "real time".
2021-03-31 13:47:27 -04:00
drivers/Bma421.cpp
drivers/Bma421_C/bma4.c
drivers/Bma421_C/bma423.c
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
components/battery/BatteryController.cpp
components/ble/BleController.cpp
components/ble/NotificationManager.cpp
components/datetime/DateTimeController.cpp
components/brightness/BrightnessController.cpp
First integration of the motion sensor (bma 421) : step counting + wake on wrist rotation + app to see the value of the 3 axis in "real time".
2021-03-31 13:47:27 -04:00
components/motion/MotionController.cpp
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
components/ble/NimbleController.cpp
components/ble/DeviceInformationService.cpp
components/ble/CurrentTimeClient.cpp
components/ble/AlertNotificationClient.cpp
components/ble/DfuService.cpp
components/ble/CurrentTimeService.cpp
components/ble/AlertNotificationService.cpp
components/ble/MusicService.cpp
Fixed recovery build
2021-11-28 12:13:28 -05:00
components/ble/weather/WeatherService.cpp
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
components/ble/BatteryInformationService.cpp
Added Blank FSService that exposes only version info
2021-10-16 21:09:26 -04:00
components/ble/FSService.cpp
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
components/ble/ImmediateAlertService.cpp
components/ble/ServiceDiscovery.cpp
components/ble/NavigationService.cpp
components/ble/HeartRateService.cpp
Add MotionService : expose step count and RAW X/Y/Z values to the host.
2021-10-17 02:23:44 -04:00
components/ble/MotionService.cpp
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
components/firmwarevalidator/FirmwareValidator.cpp
Merge branch 'develop' of github.com:JF002/Pinetime into develop # Conflicts: # src/main.cpp # src/systemtask/SystemTask.h
2021-03-20 06:41:49 -04:00
components/settings/Settings.cpp
Timer App (#355) * built timer app * Style improvements * making sure buttons stay hidden when the app is reopened and reappear after the timer runs out * more sensible calculations of time deltas. eliminated that mysterious scaling factor * changing the timer icon
2021-05-20 14:43:54 -04:00
components/timer/TimerController.cpp
Created basic alarm app
2021-09-10 18:40:13 -04:00
components/alarm/AlarmController.cpp
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
drivers/Cst816s.cpp
FreeRTOS/port.c
FreeRTOS/port_cmsis_systick.c
FreeRTOS/port_cmsis.c
systemtask/SystemTask.cpp
SystemMonitor: implement FreeRtosMonitor only if trace facility is set Split SystemMonitor into h and cpp file and move the logging code of the `Process` function into the cpp file. Depending of the `configUSE_TRACE_FACILITY` define from `src/FreeRTOSConfig.h` create either a "FreeRtosMonitor" or a "DummyMonitor". Make the `Process()` function non-const, as the FreeRtosMonitor changes the member variable `lastTick`. In `SystemTask.h` we then only need to use `SystemMonitor`, without knowledge of the `configUSE_TRACE_FACILITY` define.
2022-01-27 17:10:59 -05:00
systemtask/SystemMonitor.cpp
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
drivers/TwiMaster.cpp
components/gfx/Gfx.cpp
components/rle/RleDecoder.cpp
components/heartrate/HeartRateController.cpp
heartratetask/HeartRateTask.cpp
components/heartrate/Ppg.cpp
components/heartrate/Biquad.cpp
components/heartrate/Ptagc.cpp
Merge branch 'develop' into recovery-firmware # Conflicts: # src/CMakeLists.txt # src/displayapp/DisplayApp.h # src/systemtask/SystemTask.cpp # src/systemtask/SystemTask.h
2021-03-07 02:44:14 -05:00
components/motor/MotorController.cpp
Using littlefs (#438) * add submodule littlefs * base fs * Save settings using littlefs * Small fixes and suggestions from PR * More small fixes from PR suggestions * Code clean up * Change SpiNorFlash functions to be private in FS
2021-07-11 09:06:06 -04:00
components/fs/FS.cpp
Newer buttonhandler
2021-10-25 05:53:14 -04:00
buttonhandler/ButtonHandler.cpp
New touch handler, with issues
2021-07-15 07:11:27 -04:00
touchhandler/TouchHandler.cpp
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
)
list(APPEND RECOVERYLOADER_SOURCE_FILES
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
# FreeRTOS
FreeRTOS/port.c
FreeRTOS/port_cmsis_systick.c
FreeRTOS/port_cmsis.c
Add new target (pinetime-graphics) that flash the bootloader logo into the spi flash memory.
2020-06-06 13:28:01 -04:00
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
drivers/SpiNorFlash.cpp
drivers/SpiMaster.cpp
drivers/Spi.cpp
Renamed Logging/ to logging/
2020-10-02 14:45:51 -04:00
logging/NrfLogger.cpp
Add new target (pinetime-graphics) that flash the bootloader logo into the spi flash memory.
2020-06-06 13:28:01 -04:00
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
components/rle/RleDecoder.cpp
Fixed all the includes that were broken due to the renames
2020-10-02 15:16:48 -04:00
components/gfx/Gfx.cpp
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
drivers/St7789.cpp
Fixed all the includes that were broken due to the renames
2020-10-02 15:16:48 -04:00
components/brightness/BrightnessController.cpp
Add new target (pinetime-graphics) that flash the bootloader logo into the spi flash memory.
2020-06-06 13:28:01 -04:00
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
recoveryLoader.cpp
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
)
Add new target (pinetime-graphics) that flash the bootloader logo into the spi flash memory.
2020-06-06 13:28:01 -04:00
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
Initial commit
2019-11-17 14:47:04 -05:00
set(INCLUDE_FILES
Big UI and navigation Rewrite new navigation add some color to the apps redesign menus new settings menu new quick settings code clean up size reduction by converting navigation images to font and more...
2021-04-03 22:08:51 -04:00
Create Version.h in binary dir instead of src dir Don't use source directory for generated files. Use the binary (build) directory instead.
2022-01-17 15:25:16 -05:00
${CMAKE_CURRENT_BINARY_DIR}/src/Version.h
Disable sleep mode on the SPI NOR Flash when the version is unknown. This is because the current bootloader (which does not exposes its version) cannot initialize the chip when it's in sleep mode. This feature will be re-enabled when the bootloader expses it's version.
2020-10-27 14:38:45 -04:00
BootloaderVersion.h
Renamed Logging/ to logging/
2020-10-02 14:45:51 -04:00
logging/Logger.h
logging/NrfLogger.h
Renamed DisplayApp/ to displayapp/
2020-10-02 14:46:41 -04:00
displayapp/DisplayApp.h
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
displayapp/Messages.h
Renamed DisplayApp/ to displayapp/
2020-10-02 14:46:41 -04:00
displayapp/TouchEvents.h
Renamed displayapp/Screens to displayapp/screens
2020-10-02 14:49:55 -04:00
displayapp/screens/Screen.h
displayapp/screens/Clock.h
displayapp/screens/Tile.h
displayapp/screens/InfiniPaint.h
Basic logic done. Need to change the timer source to get ms. Also need to replace with paddle app in displayApp.cpp and ApplicationList.cpp later.
2021-03-11 04:54:14 -05:00
displayapp/screens/StopWatch.h
Addition of new files in MakeList added Paddle.cpp and Paddle.h
2020-12-03 09:16:36 -05:00
displayapp/screens/Paddle.h
Renamed displayapp/Screens to displayapp/screens
2020-10-02 14:49:55 -04:00
displayapp/screens/BatteryIcon.h
Integrate new notification UI with notifications coming from BLE
2020-10-20 14:57:39 -04:00
displayapp/screens/BleIcon.h
displayapp/screens/NotificationIcon.h
Renamed displayapp/Screens to displayapp/screens
2020-10-02 14:49:55 -04:00
displayapp/screens/SystemInfo.h
displayapp/screens/ScreenList.h
displayapp/screens/Label.h
displayapp/screens/FirmwareUpdate.h
displayapp/screens/FirmwareValidation.h
displayapp/screens/ApplicationList.h
Renamed DisplayApp/ to displayapp/
2020-10-02 14:46:41 -04:00
displayapp/Apps.h
Integrate new notification UI with notifications coming from BLE
2020-10-20 14:57:39 -04:00
displayapp/screens/Notifications.h
First implementation of the HR sensor using 100% foss code (ported from waspos)
2021-01-10 11:57:26 -05:00
displayapp/screens/HeartRate.h
add basic metronome app (#409) * add basic metronome app * add bpb, tap to bpm, update widgets * use event pressed for bpm tap * move case statement break to the right place * narrow bpm selection range, override touch events * fix arc knob style * re-enable sleeping in destructor
2021-06-12 09:06:58 -04:00
displayapp/screens/Metronome.h
First integration of the motion sensor (bma 421) : step counting + wake on wrist rotation + app to see the value of the 3 axis in "real time".
2021-03-31 13:47:27 -04:00
displayapp/screens/Motion.h
Timer App (#355) * built timer app * Style improvements * making sure buttons stay hidden when the app is reopened and reappear after the timer runs out * more sensible calculations of time deltas. eliminated that mysterious scaling factor * changing the timer icon
2021-05-20 14:43:54 -04:00
displayapp/screens/Timer.h
Created basic alarm app
2021-09-10 18:40:13 -04:00
displayapp/screens/Alarm.h
Settings : use enums instead of ints to store colors. Group all PTS settings into a struct. PTS/SettingsPTS : Convert to/from LVGL color and Settings::Color, add functions to reduce code duplication. Adapt SettingPineTimeStyle with the last Screen Interface
2021-08-28 15:02:11 -04:00
displayapp/Colors.h
Add initial counter widget
2022-04-21 10:17:49 -04:00
displayapp/widgets/Counter.h
Add PageIndicator widget to reduce code duplication (#1218) * Move PageIndicator widget to its own files to reduce code duplication * Use uint8_t in PageIndicator
2022-07-05 01:41:09 -04:00
displayapp/widgets/PageIndicator.h
Add status icons widget
2022-07-21 12:27:52 -04:00
displayapp/widgets/StatusIcons.h
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
drivers/St7789.h
drivers/SpiNorFlash.h
drivers/SpiMaster.h
drivers/Spi.h
drivers/Watchdog.h
drivers/DebugPins.h
drivers/InternalFlash.h
First implementation of the HR sensor using 100% foss code (ported from waspos)
2021-01-10 11:57:26 -05:00
drivers/Hrs3300.h
DRAFT: Put gpio pins to separate file
2021-08-02 15:37:48 -04:00
drivers/PinMap.h
First integration of the motion sensor (bma 421) : step counting + wake on wrist rotation + app to see the value of the 3 axis in "real time".
2021-03-31 13:47:27 -04:00
drivers/Bma421.h
drivers/Bma421_C/bma4.c
drivers/Bma421_C/bma423.c
Fixed all the includes that were broken due to the renames
2020-10-02 15:16:48 -04:00
components/battery/BatteryController.h
components/ble/BleController.h
components/ble/NotificationManager.h
components/datetime/DateTimeController.h
components/brightness/BrightnessController.h
First integration of the motion sensor (bma 421) : step counting + wake on wrist rotation + app to see the value of the 3 axis in "real time".
2021-03-31 13:47:27 -04:00
components/motion/MotionController.h
Tidied up and added Weather to CMakeLists.txt
2021-06-09 17:45:39 -04:00
components/firmwarevalidator/FirmwareValidator.h
components/ble/BleController.h
components/ble/NotificationManager.h
Fixed all the includes that were broken due to the renames
2020-10-02 15:16:48 -04:00
components/ble/NimbleController.h
components/ble/DeviceInformationService.h
components/ble/CurrentTimeClient.h
components/ble/AlertNotificationClient.h
components/ble/DfuService.h
components/firmwarevalidator/FirmwareValidator.h
components/ble/BatteryInformationService.h
Added Blank FSService that exposes only version info
2021-10-16 21:09:26 -04:00
components/ble/FSService.h
Fixed all the includes that were broken due to the renames
2020-10-02 15:16:48 -04:00
components/ble/ImmediateAlertService.h
Refactoring of BLE service discovery : it is now implemented into the classes of the services.
2020-10-29 11:06:01 -04:00
components/ble/ServiceDiscovery.h
components/ble/BleClient.h
Multi face support, analog clock, 12/24 config
2021-02-24 14:40:24 -05:00
components/ble/HeartRateService.h
Add MotionService : expose step count and RAW X/Y/Z values to the host.
2021-10-17 02:23:44 -04:00
components/ble/MotionService.h
Tidied up and added Weather to CMakeLists.txt
2021-06-09 17:45:39 -04:00
components/ble/weather/WeatherService.h
Multi face support, analog clock, 12/24 config
2021-02-24 14:40:24 -05:00
components/settings/Settings.h
Timer App (#355) * built timer app * Style improvements * making sure buttons stay hidden when the app is reopened and reappear after the timer runs out * more sensible calculations of time deltas. eliminated that mysterious scaling factor * changing the timer icon
2021-05-20 14:43:54 -04:00
components/timer/TimerController.h
Created basic alarm app
2021-09-10 18:40:13 -04:00
components/alarm/AlarmController.h
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
drivers/Cst816s.h
FreeRTOS/portmacro.h
FreeRTOS/portmacro_cmsis.h
Use submodule for date lib A directory has been renamed
2022-05-11 04:35:24 -04:00
libs/date/include/date/tz.h
libs/date/include/date/chrono_io.h
libs/date/include/date/date.h
libs/date/include/date/islamic.h
libs/date/include/date/iso_week.h
libs/date/include/date/julian.h
libs/date/include/date/ptz.h
libs/date/include/date/tz_private.h
Renamed DisplayApp/ to displayapp/
2020-10-02 14:46:41 -04:00
displayapp/LittleVgl.h
Centralize most color definitions (#1258)
2022-08-16 01:21:23 -04:00
displayapp/InfiniTimeTheme.h
Renamed SystemTask/ to systemtask/
2020-10-02 14:45:21 -04:00
systemtask/SystemTask.h
systemtask/SystemMonitor.h
Renamed displayapp/Screens to displayapp/screens
2020-10-02 14:49:55 -04:00
displayapp/screens/Symbols.h
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
drivers/TwiMaster.h
First implementation of the HR sensor using 100% foss code (ported from waspos)
2021-01-10 11:57:26 -05:00
heartratetask/HeartRateTask.h
components/heartrate/Ppg.h
components/heartrate/Biquad.h
components/heartrate/Ptagc.h
components/heartrate/HeartRateController.h
fis merge conflict?
2021-01-23 16:12:06 -05:00
components/motor/MotorController.h
Newer buttonhandler
2021-10-25 05:53:14 -04:00
buttonhandler/ButtonHandler.h
New touch handler, with issues
2021-07-15 07:11:27 -04:00
touchhandler/TouchHandler.h
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
)
Improve power consumption and SLEEP mode : - Disable IDLE hook (it would wake the device up as soon as possible). - Logger task sleep for 100ms (disable logging for better battery life) - Logging is disabled by default - Apply fix for ERRATA 87 (clear FPU interrupt before going to sleep). Ports files from FreeRTOS are now in the sources (they where in the SDK before)
2020-01-05 05:09:07 -05:00
include_directories(
Create Version.h in binary dir instead of src dir Don't use source directory for generated files. Use the binary (build) directory instead.
2022-01-17 15:25:16 -05:00
${CMAKE_BINARY_DIR}/src # include generated files like Version.h
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
.
../
libs/
FreeRTOS/
Use submodule for date lib A directory has been renamed
2022-05-11 04:35:24 -04:00
libs/date/include
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
libs/mynewt-nimble/porting/npl/freertos/include
libs/mynewt-nimble/nimble/include
libs/mynewt-nimble/porting/nimble/include
libs/mynewt-nimble/nimble/host/include
libs/mynewt-nimble/nimble/controller/include
libs/mynewt-nimble/nimble/transport/ram/include
libs/mynewt-nimble/nimble/drivers/nrf52/include
libs/mynewt-nimble/ext/tinycrypt/include
libs/mynewt-nimble/nimble/host/services/gap/include
libs/mynewt-nimble/nimble/host/services/gatt/include
libs/mynewt-nimble/nimble/host/util/include
libs/mynewt-nimble/nimble/host/store/ram/include
"${NRF5_SDK_PATH}/components/drivers_nrf/nrf_soc_nosd"
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
"${NRF5_SDK_PATH}/components"
"${NRF5_SDK_PATH}/components/boards"
"${NRF5_SDK_PATH}/components/softdevice/common"
"${NRF5_SDK_PATH}/integration/nrfx"
"${NRF5_SDK_PATH}/integration/nrfx/legacy"
"${NRF5_SDK_PATH}/modules/nrfx"
"${NRF5_SDK_PATH}/modules/nrfx/drivers/include"
"${NRF5_SDK_PATH}/modules/nrfx/hal"
"${NRF5_SDK_PATH}/modules/nrfx/mdk"
Update CMakeLists.txt
2021-01-30 12:11:07 -05:00
"${NRF5_SDK_PATH}/external/freertos/source/include"
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
"${NRF5_SDK_PATH}/components/toolchain/cmsis/include"
"${NRF5_SDK_PATH}/components/libraries/atomic"
"${NRF5_SDK_PATH}/components/libraries/atomic_fifo"
"${NRF5_SDK_PATH}/components/libraries/atomic_flags"
"${NRF5_SDK_PATH}/components/libraries/balloc"
"${NRF5_SDK_PATH}/components/libraries/bootloader/ble_dfu"
"${NRF5_SDK_PATH}/components/libraries/cli"
"${NRF5_SDK_PATH}/components/libraries/crc16"
"${NRF5_SDK_PATH}/components/libraries/crc32"
"${NRF5_SDK_PATH}/components/libraries/crypto"
"${NRF5_SDK_PATH}/components/libraries/csense"
"${NRF5_SDK_PATH}/components/libraries/csense_drv"
"${NRF5_SDK_PATH}/components/libraries/delay"
"${NRF5_SDK_PATH}/components/libraries/ecc"
"${NRF5_SDK_PATH}/components/libraries/experimental_section_vars"
"${NRF5_SDK_PATH}/components/libraries/experimental_task_manager"
"${NRF5_SDK_PATH}/components/libraries/fds"
"${NRF5_SDK_PATH}/components/libraries/fstorage"
"${NRF5_SDK_PATH}/components/libraries/gfx"
"${NRF5_SDK_PATH}/components/libraries/gpiote"
"${NRF5_SDK_PATH}/components/libraries/hardfault"
"${NRF5_SDK_PATH}/components/libraries/hci"
"${NRF5_SDK_PATH}/components/libraries/led_softblink"
"${NRF5_SDK_PATH}/components/libraries/log"
"${NRF5_SDK_PATH}/components/libraries/log/src"
"${NRF5_SDK_PATH}/components/libraries/low_power_pwm"
"${NRF5_SDK_PATH}/components/libraries/mem_manager"
"${NRF5_SDK_PATH}/components/libraries/memobj"
"${NRF5_SDK_PATH}/components/libraries/mpu"
"${NRF5_SDK_PATH}/components/libraries/mutex"
"${NRF5_SDK_PATH}/components/libraries/pwm"
"${NRF5_SDK_PATH}/components/libraries/pwr_mgmt"
"${NRF5_SDK_PATH}/components/libraries/queue"
"${NRF5_SDK_PATH}/components/libraries/ringbuf"
"${NRF5_SDK_PATH}/components/libraries/scheduler"
"${NRF5_SDK_PATH}/components/libraries/sdcard"
"${NRF5_SDK_PATH}/components/libraries/slip"
"${NRF5_SDK_PATH}/components/libraries/sortlist"
"${NRF5_SDK_PATH}/components/libraries/spi_mngr"
"${NRF5_SDK_PATH}/components/libraries/stack_guard"
"${NRF5_SDK_PATH}/components/libraries/strerror"
"${NRF5_SDK_PATH}/components/libraries/svc"
"${NRF5_SDK_PATH}/components/libraries/timer"
"${NRF5_SDK_PATH}/components/libraries/usbd"
"${NRF5_SDK_PATH}/components/libraries/usbd/class/audio"
"${NRF5_SDK_PATH}/components/libraries/usbd/class/cdc"
"${NRF5_SDK_PATH}/components/libraries/usbd/class/cdc/acm"
"${NRF5_SDK_PATH}/components/libraries/usbd/class/hid"
"${NRF5_SDK_PATH}/components/libraries/usbd/class/hid/generic"
"${NRF5_SDK_PATH}/components/libraries/usbd/class/hid/kbd"
"${NRF5_SDK_PATH}/components/libraries/usbd/class/hid/mouse"
"${NRF5_SDK_PATH}/components/libraries/usbd/class/msc"
"${NRF5_SDK_PATH}/components/libraries/util"
"${NRF5_SDK_PATH}/external/segger_rtt/"
"${NRF5_SDK_PATH}/external/fprintf/"
"${NRF5_SDK_PATH}/external/thedotfactory_fonts"
"${NRF5_SDK_PATH}/components/libraries/gpiote"
Initial commit
2019-11-17 14:47:04 -05:00
)
Fix link error because of missing file "nrf_common.ld"
2020-01-12 10:26:20 -05:00
link_directories(
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
../
Fix link error because of missing file "nrf_common.ld"
2020-01-12 10:26:20 -05:00
)
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
Few formatting fixes
2021-06-24 19:52:59 -04:00
set(COMMON_FLAGS -MP -MD -mthumb -mabi=aapcs -Wall -Wextra -Warray-bounds=2 -Wformat=2 -Wformat-overflow=2 -Wformat-truncation=2 -Wformat-nonliteral -ftree-vrp -Wno-unused-parameter -Wno-missing-field-initializers -Wno-unknown-pragmas -Wno-expansion-to-defined -g3 -ffunction-sections -fdata-sections -fno-strict-aliasing -fno-builtin --short-enums -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16 -Wreturn-type -Werror=return-type -fstack-usage -fno-exceptions -fno-non-call-exceptions)
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
add_definitions(-DCONFIG_GPIO_AS_PINRESET)
add_definitions(-DNIMBLE_CFG_CONTROLLER)
add_definitions(-DOS_CPUTIME_FREQ)
add_definitions(-DNRF52 -DNRF52832 -DNRF52832_XXAA -DNRF52_PAN_74 -DNRF52_PAN_64 -DNRF52_PAN_12 -DNRF52_PAN_58 -DNRF52_PAN_54 -DNRF52_PAN_31 -DNRF52_PAN_51 -DNRF52_PAN_36 -DNRF52_PAN_15 -DNRF52_PAN_20 -DNRF52_PAN_55 -DBOARD_PCA10040)
add_definitions(-DFREERTOS)
Initialize SystemTask, DisplayApp and HeartRateTask as global static variable instead of variables on the heap. We don't need them on the heap as we know their size at build time, it'll reduce memory fragmentation and it'll make memory analysis easier.
2021-06-06 09:56:03 -04:00
add_definitions(-D__STACK_SIZE=1024)
add_definitions(-D__HEAP_SIZE=4096)
Nimble: Reduce BLE power usage This configures Nimble to enable the HFCLOCK and other Bluetooth peripherals only when needed, but 1500 us in advance. This time is recommended by the Mynewt docs.
2022-03-21 09:05:49 -04:00
add_definitions(-DMYNEWT_VAL_BLE_LL_RFMGMT_ENABLE_TIME=1500)
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
Add basic hardware configuration options for P8 This enables the configuration of the LFCLK source, as well as the target hardware board pin configuration.
2022-05-10 15:46:36 -04:00
# Note: Only use this for debugging
# Derive the low frequency clock from the main clock (SYNT)
# add_definitions(-DCLOCK_CONFIG_LF_SRC=2)
# Target hardware configuration options
add_definitions(-DTARGET_DEVICE_${TARGET_DEVICE})
Display target build variant in system info screen
2022-06-27 02:34:01 -04:00
add_definitions(-DTARGET_DEVICE_NAME="${TARGET_DEVICE}")
Add basic hardware configuration options for P8 This enables the configuration of the LFCLK source, as well as the target hardware board pin configuration.
2022-05-10 15:46:36 -04:00
if(TARGET_DEVICE STREQUAL "PINETIME")
add_definitions(-DDRIVER_PINMAP_PINETIME)
add_definitions(-DCLOCK_CONFIG_LF_SRC=1) # XTAL
elseif(TARGET_DEVICE STREQUAL "MOY-TFK5") # P8a
add_definitions(-DDRIVER_PINMAP_P8)
add_definitions(-DCLOCK_CONFIG_LF_SRC=1) # XTAL
elseif(TARGET_DEVICE STREQUAL "MOY-TIN5") # P8a variant 2
add_definitions(-DDRIVER_PINMAP_P8)
add_definitions(-DCLOCK_CONFIG_LF_SRC=1) # XTAL
elseif(TARGET_DEVICE STREQUAL "MOY-TON5") # P8b
add_definitions(-DDRIVER_PINMAP_P8)
add_definitions(-DCLOCK_CONFIG_LF_SRC=0) # RC
add_definitions(-DMYNEWT_VAL_BLE_LL_SCA=500)
add_definitions(-DCLOCK_CONFIG_LF_CAL_ENABLED=1)
elseif(TARGET_DEVICE STREQUAL "MOY-UNK") # P8b mirrored
add_definitions(-DDRIVER_PINMAP_P8)
add_definitions(-DCLOCK_CONFIG_LF_SRC=0) # RC
add_definitions(-DMYNEWT_VAL_BLE_LL_SCA=500)
add_definitions(-DCLOCK_CONFIG_LF_CAL_ENABLED=1)
Add P8B mirrored version definition.
2022-06-24 18:32:23 -04:00
add_definitions(-DDRIVER_DISPLAY_MIRROR)
Add basic hardware configuration options for P8 This enables the configuration of the LFCLK source, as well as the target hardware board pin configuration.
2022-05-10 15:46:36 -04:00
else()
message(FATAL_ERROR "Invalid TARGET_DEVICE")
endif()
CMake: Extend debug configuration Enable debug output for InfiniTime, Nimble and the NRF SDK via SEGGER RTT on debug builds.
2022-05-10 16:11:08 -04:00
# Debug configuration
if (${CMAKE_BUILD_TYPE} STREQUAL "Debug")
add_definitions(-DDEBUG)
add_definitions(-DDEBUG_NRF_USER)
# NRF SDK Logging
add_definitions(-DNRF_LOG_ENABLED=1)
# add_definitions(-DNRF_LOG_BACKEND_RTT_ENABLED=1)
# add_definitions(-DNRF_LOG_BACKEND_SERIAL_USES_RTT=1)
# NRF SDK individual modules logging
# add_definitions(-DCLOCK_CONFIG_LOG_ENABLED=1)
# add_definitions(-DCLOCK_CONFIG_LOG_LEVEL=4)
# add_definitions(-DRTC_CONFIG_LOG_ENABLED=1)
# add_definitions(-DRTC_CONFIG_LOG_LEVEL=4)
# Nimble Logging
add_definitions(-DMYNEWT_VAL_NEWT_FEATURE_LOGCFG=1)
# add_definitions(-DMYNEWT_VAL_LOG_LEVEL=0)
# add_definitions(-DMYNEWT_VAL_BLE_HS_LOG_LVL=0)
endif()
Fix builds that do not specify CMAKE_BUILD_TYPE during CMake generation. Apply Release by default.
2020-06-16 15:02:03 -04:00
generalize lv-font creation In https://github.com/InfiniTimeOrg/InfiniTime/pull/1097 new font generation capabilites were added. Generalize the font creation to make it possible to reuse the `displayapp/fonts/CMakeLists.txt` file for `InfiniSim` and just add the new cmake file to the project and link against the new `infinitime_fonts` target. In the following a list of changes. Allow non-global installed `lv_font_conv` executable installed with ```sh npm install lv_font_conv@1.5.2 ``` In CMake we search for `lv_font_conv` executable. Add the found executable to the python script `generate.py`, to remove the need for `lv_font_conv` to be in the path. Search for `python3` executable, if CMake version 3.12 is available. Otherwise use `python` as hard coded executable. Instead of adding the generated fonts to `SOURCE_FILES` variable, create a static library `infinitime_fonts`. Link this library to the executables instead. Use `add_custom_target()` together with `add_custom_command()` to generate the font.c files once (like the original PR does).
2022-05-10 17:48:41 -04:00
add_subdirectory(displayapp/fonts)
target_compile_options(infinitime_fonts PUBLIC
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Og -g3>
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Os>
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Og -g3 -fno-rtti>
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Os -fno-rtti>
$<$<COMPILE_LANGUAGE:ASM>: -MP -MD -x assembler-with-cpp>
)
Build lvgl, nimble and nrf sdk as static libs. This allows to specify custom build param and to remove warnings from these libs. This also speeds up the build of the whole project as those libs are now built once for the 3 targets.
2020-08-17 10:48:12 -04:00
# NRF SDK
add_library(nrf-sdk STATIC ${SDK_SOURCE_FILES})
target_include_directories(nrf-sdk SYSTEM PUBLIC . ../)
target_include_directories(nrf-sdk SYSTEM PUBLIC ${INCLUDES_FROM_LIBS})
target_compile_options(nrf-sdk PRIVATE
Few formatting fixes
2021-06-24 19:52:59 -04:00
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Wno-expansion-to-defined -Og -g3>
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Wno-expansion-to-defined -O3>
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Wno-expansion-to-defined -Og -fno-rtti>
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Wno-expansion-to-defined -O3 -fno-rtti>
Refactored src/CMakelist to support C++14 and cleanup up redundant/incorrect -std= directives
2021-03-03 10:27:32 -05:00
$<$<COMPILE_LANGUAGE:ASM>: -MP -MD -x assembler-with-cpp>
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
)
Build lvgl, nimble and nrf sdk as static libs. This allows to specify custom build param and to remove warnings from these libs. This also speeds up the build of the whole project as those libs are now built once for the 3 targets.
2020-08-17 10:48:12 -04:00
# NimBLE
add_library(nimble STATIC ${NIMBLE_SRC} ${TINYCRYPT_SRC})
target_include_directories(nimble SYSTEM PUBLIC . ../)
target_include_directories(nimble SYSTEM PUBLIC ${INCLUDES_FROM_LIBS})
target_compile_options(nimble PRIVATE
Enable various compilation flags to reduce the binary size (#401) * Add the following compilation flags: * -fno-exceptions and -fno-non-call-exceptions : disable exception handling * -fno-rtti : disable run time type information (needed by dynamic_cast, for example) These flags reduce the binary size by about 100KB! Also, -fstack-usage generate debug info (not in final binary) to allow tools like Puncover to do a stack analysis. * Remove unused CMake variables in CMake_nRF5x.cmake (duplicated in src/CMakeLists.txt). Replace -O0 by -Og in DEBUG builds. This generates a smaller binary (small enough for the internal memory) that is debugger friendly.
2021-06-01 15:03:01 -04:00
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Og -g3 -Wno-unused-but-set-variable -Wno-maybe-uninitialized>
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Os -Wno-unused-but-set-variable -Wno-maybe-uninitialized>
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Og -g3 -Wno-unused-but-set-variable -Wno-maybe-uninitialized -fno-rtti>
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Os -Wno-unused-but-set-variable -Wno-maybe-uninitialized -fno-rtti>
Refactored src/CMakelist to support C++14 and cleanup up redundant/incorrect -std= directives
2021-03-03 10:27:32 -05:00
$<$<COMPILE_LANGUAGE:ASM>: -MP -MD -x assembler-with-cpp>
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
)
Build lvgl, nimble and nrf sdk as static libs. This allows to specify custom build param and to remove warnings from these libs. This also speeds up the build of the whole project as those libs are now built once for the 3 targets.
2020-08-17 10:48:12 -04:00
# lvgl
add_library(lvgl STATIC ${LVGL_SRC})
target_include_directories(lvgl SYSTEM PUBLIC . ../)
target_include_directories(lvgl SYSTEM PUBLIC ${INCLUDES_FROM_LIBS})
target_compile_options(lvgl PRIVATE
Enable various compilation flags to reduce the binary size (#401) * Add the following compilation flags: * -fno-exceptions and -fno-non-call-exceptions : disable exception handling * -fno-rtti : disable run time type information (needed by dynamic_cast, for example) These flags reduce the binary size by about 100KB! Also, -fstack-usage generate debug info (not in final binary) to allow tools like Puncover to do a stack analysis. * Remove unused CMake variables in CMake_nRF5x.cmake (duplicated in src/CMakeLists.txt). Replace -O0 by -Og in DEBUG builds. This generates a smaller binary (small enough for the internal memory) that is debugger friendly.
2021-06-01 15:03:01 -04:00
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Og -g3>
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Os>
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Og -g3 -fno-rtti>
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Os -fno-rtti>
Refactored src/CMakelist to support C++14 and cleanup up redundant/incorrect -std= directives
2021-03-03 10:27:32 -05:00
$<$<COMPILE_LANGUAGE:ASM>: -MP -MD -x assembler-with-cpp>
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
)
Build lvgl, nimble and nrf sdk as static libs. This allows to specify custom build param and to remove warnings from these libs. This also speeds up the build of the whole project as those libs are now built once for the 3 targets.
2020-08-17 10:48:12 -04:00
Added QCBOR dependency
2021-05-17 06:57:21 -04:00
# QCBOR
add_library(QCBOR STATIC ${QCBOR_SRC})
target_include_directories(QCBOR SYSTEM PUBLIC libs/QCBOR/inc)
# This is required with the current configuration
target_compile_definitions(QCBOR PUBLIC QCBOR_DISABLE_FLOAT_HW_USE)
# These are for space-saving
target_compile_definitions(QCBOR PUBLIC QCBOR_DISABLE_PREFERRED_FLOAT)
target_compile_definitions(QCBOR PUBLIC QCBOR_DISABLE_EXP_AND_MANTISSA)
target_compile_definitions(QCBOR PUBLIC QCBOR_DISABLE_INDEFINITE_LENGTH_STRINGS)
Improved error handling and fixed incompatibility with co.nstant.in:cbor library
2021-11-28 13:58:28 -05:00
#target_compile_definitions(QCBOR PUBLIC QCBOR_DISABLE_INDEFINITE_LENGTH_ARRAYS)
Added QCBOR dependency
2021-05-17 06:57:21 -04:00
target_compile_definitions(QCBOR PUBLIC QCBOR_DISABLE_UNCOMMON_TAGS)
Fixed a few bugs, enabled UsefulBuf library optimizations
2021-06-20 14:37:53 -04:00
target_compile_definitions(QCBOR PUBLIC USEFULBUF_CONFIG_LITTLE_ENDIAN)
Added QCBOR dependency
2021-05-17 06:57:21 -04:00
set_target_properties(QCBOR PROPERTIES LINKER_LANGUAGE C)
target_compile_options(QCBOR PRIVATE
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -O0 -g3>
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -O3>
$<$<COMPILE_LANGUAGE:ASM>: -MP -MD -x assembler-with-cpp>
)
Using littlefs (#438) * add submodule littlefs * base fs * Save settings using littlefs * Small fixes and suggestions from PR * More small fixes from PR suggestions * Code clean up * Change SpiNorFlash functions to be private in FS
2021-07-11 09:06:06 -04:00
# LITTLEFS_SRC
add_library(littlefs STATIC ${LITTLEFS_SRC})
target_include_directories(littlefs SYSTEM PUBLIC . ../)
target_include_directories(littlefs SYSTEM PUBLIC ${INCLUDES_FROM_LIBS})
target_compile_options(littlefs PRIVATE
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Wno-unused-function -Og -g3>
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Wno-unused-function -Os>
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Wno-unused-function -Og -g3 -fno-rtti>
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Wno-unused-function -Os -fno-rtti>
$<$<COMPILE_LANGUAGE:ASM>: -MP -MD -x assembler-with-cpp>
)
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
# Build autonomous binary (without support for bootloader)
set(EXECUTABLE_NAME "pinetime-app")
All output files (bin, hex, image, dfu) contain the version of the project in their filename. Update Docker build script accordingly. Also fix permission issue with docker build (all files belonged to root).
2020-08-19 15:52:46 -04:00
set(EXECUTABLE_FILE_NAME ${EXECUTABLE_NAME}-${pinetime_VERSION_MAJOR}.${pinetime_VERSION_MINOR}.${pinetime_VERSION_PATCH})
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
set(NRF5_LINKER_SCRIPT "${CMAKE_SOURCE_DIR}/gcc_nrf52.ld")
add_executable(${EXECUTABLE_NAME} ${SOURCE_FILES})
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
set_target_properties(${EXECUTABLE_NAME} PROPERTIES OUTPUT_NAME ${EXECUTABLE_FILE_NAME})
generalize lv-font creation In https://github.com/InfiniTimeOrg/InfiniTime/pull/1097 new font generation capabilites were added. Generalize the font creation to make it possible to reuse the `displayapp/fonts/CMakeLists.txt` file for `InfiniSim` and just add the new cmake file to the project and link against the new `infinitime_fonts` target. In the following a list of changes. Allow non-global installed `lv_font_conv` executable installed with ```sh npm install lv_font_conv@1.5.2 ``` In CMake we search for `lv_font_conv` executable. Add the found executable to the python script `generate.py`, to remove the need for `lv_font_conv` to be in the path. Search for `python3` executable, if CMake version 3.12 is available. Otherwise use `python` as hard coded executable. Instead of adding the generated fonts to `SOURCE_FILES` variable, create a static library `infinitime_fonts`. Link this library to the executables instead. Use `add_custom_target()` together with `add_custom_command()` to generate the font.c files once (like the original PR does).
2022-05-10 17:48:41 -04:00
target_link_libraries(${EXECUTABLE_NAME} nimble nrf-sdk lvgl littlefs QCBOR infinitime_fonts)
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
target_compile_options(${EXECUTABLE_NAME} PUBLIC
Improved error handling and fixed incompatibility with co.nstant.in:cbor library
2021-11-28 13:58:28 -05:00
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Wextra -Wformat -Wno-missing-field-initializers -Wno-unused-parameter -Og -g3>
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Wextra -Wformat -Wno-missing-field-initializers -Wno-unused-parameter -Os>
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Wextra -Wformat -Wno-missing-field-initializers -Wno-unused-parameter -Og -g3 -fno-rtti>
Removed unnecessary change in CMakeLists
2021-12-01 11:43:23 -05:00
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Wextra -Wformat -Wno-missing-field-initializers -Wno-unused-parameter -Os -fno-rtti>
Refactored src/CMakelist to support C++14 and cleanup up redundant/incorrect -std= directives
2021-03-03 10:27:32 -05:00
$<$<COMPILE_LANGUAGE:ASM>: -MP -MD -x assembler-with-cpp>
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
)
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
set_target_properties(${EXECUTABLE_NAME} PROPERTIES
SUFFIX ".out"
Add memory print usage
2021-08-16 10:42:42 -04:00
LINK_FLAGS "-mthumb -mabi=aapcs -L ${NRF5_SDK_PATH}/modules/nrfx/mdk -T${NRF5_LINKER_SCRIPT} -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16 -Wl,--gc-sections -Wl,--print-memory-usage --specs=nano.specs -lc -lnosys -lm -Wl,-Map=${EXECUTABLE_FILE_NAME}.map"
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
)
add_custom_command(TARGET ${EXECUTABLE_NAME}
POST_BUILD
All output files (bin, hex, image, dfu) contain the version of the project in their filename. Update Docker build script accordingly. Also fix permission issue with docker build (all files belonged to root).
2020-08-19 15:52:46 -04:00
COMMAND ${CMAKE_SIZE_UTIL} ${EXECUTABLE_FILE_NAME}.out
COMMAND ${CMAKE_OBJCOPY} -O binary ${EXECUTABLE_FILE_NAME}.out "${EXECUTABLE_FILE_NAME}.bin"
COMMAND ${CMAKE_OBJCOPY} -O ihex ${EXECUTABLE_FILE_NAME}.out "${EXECUTABLE_FILE_NAME}.hex"
COMMENT "post build steps for ${EXECUTABLE_FILE_NAME}")
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
Small improvement in generate-fonts.py following code review. Add lv_img_conf in Docker image to build resources at build time.
2022-09-11 06:43:30 -04:00
if(BUILD_RESOURCES)
add_dependencies(${EXECUTABLE_NAME} GenerateResources)
endif()
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
# Build binary intended to be used by bootloader
set(EXECUTABLE_MCUBOOT_NAME "pinetime-mcuboot-app")
All output files (bin, hex, image, dfu) contain the version of the project in their filename. Update Docker build script accordingly. Also fix permission issue with docker build (all files belonged to root).
2020-08-19 15:52:46 -04:00
set(EXECUTABLE_MCUBOOT_FILE_NAME ${EXECUTABLE_MCUBOOT_NAME}-${pinetime_VERSION_MAJOR}.${pinetime_VERSION_MINOR}.${pinetime_VERSION_PATCH})
Fix filename of the MCUBoot image and recovery MCUBoot image in CMake files. This will fix the generation of output files at the end of the build process.
2022-07-08 11:59:51 -04:00
set(IMAGE_MCUBOOT_FILE_NAME_HEX ${EXECUTABLE_MCUBOOT_NAME}-image-${pinetime_VERSION_MAJOR}.${pinetime_VERSION_MINOR}.${pinetime_VERSION_PATCH}.hex)
set(IMAGE_MCUBOOT_FILE_NAME_BIN ${EXECUTABLE_MCUBOOT_NAME}-image-${pinetime_VERSION_MAJOR}.${pinetime_VERSION_MINOR}.${pinetime_VERSION_PATCH}.bin)
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
set(DFU_MCUBOOT_FILE_NAME ${EXECUTABLE_MCUBOOT_NAME}-dfu-${pinetime_VERSION_MAJOR}.${pinetime_VERSION_MINOR}.${pinetime_VERSION_PATCH}.zip)
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
set(NRF5_LINKER_SCRIPT_MCUBOOT "${CMAKE_SOURCE_DIR}/gcc_nrf52-mcuboot.ld")
add_executable(${EXECUTABLE_MCUBOOT_NAME} ${SOURCE_FILES})
generalize lv-font creation In https://github.com/InfiniTimeOrg/InfiniTime/pull/1097 new font generation capabilites were added. Generalize the font creation to make it possible to reuse the `displayapp/fonts/CMakeLists.txt` file for `InfiniSim` and just add the new cmake file to the project and link against the new `infinitime_fonts` target. In the following a list of changes. Allow non-global installed `lv_font_conv` executable installed with ```sh npm install lv_font_conv@1.5.2 ``` In CMake we search for `lv_font_conv` executable. Add the found executable to the python script `generate.py`, to remove the need for `lv_font_conv` to be in the path. Search for `python3` executable, if CMake version 3.12 is available. Otherwise use `python` as hard coded executable. Instead of adding the generated fonts to `SOURCE_FILES` variable, create a static library `infinitime_fonts`. Link this library to the executables instead. Use `add_custom_target()` together with `add_custom_command()` to generate the font.c files once (like the original PR does).
2022-05-10 17:48:41 -04:00
target_link_libraries(${EXECUTABLE_MCUBOOT_NAME} nimble nrf-sdk lvgl littlefs QCBOR infinitime_fonts)
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
set_target_properties(${EXECUTABLE_MCUBOOT_NAME} PROPERTIES OUTPUT_NAME ${EXECUTABLE_MCUBOOT_FILE_NAME})
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
target_compile_options(${EXECUTABLE_MCUBOOT_NAME} PUBLIC
Enable various compilation flags to reduce the binary size (#401) * Add the following compilation flags: * -fno-exceptions and -fno-non-call-exceptions : disable exception handling * -fno-rtti : disable run time type information (needed by dynamic_cast, for example) These flags reduce the binary size by about 100KB! Also, -fstack-usage generate debug info (not in final binary) to allow tools like Puncover to do a stack analysis. * Remove unused CMake variables in CMake_nRF5x.cmake (duplicated in src/CMakeLists.txt). Replace -O0 by -Og in DEBUG builds. This generates a smaller binary (small enough for the internal memory) that is debugger friendly.
2021-06-01 15:03:01 -04:00
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Og -g3>
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Os>
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Og -g3 -fno-rtti>
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Os -fno-rtti>
Refactored src/CMakelist to support C++14 and cleanup up redundant/incorrect -std= directives
2021-03-03 10:27:32 -05:00
$<$<COMPILE_LANGUAGE:ASM>: -MP -MD -x assembler-with-cpp>
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
)
set_target_properties(${EXECUTABLE_MCUBOOT_NAME} PROPERTIES
SUFFIX ".out"
Add memory print usage
2021-08-16 10:42:42 -04:00
LINK_FLAGS "-mthumb -mabi=aapcs -L ${NRF5_SDK_PATH}/modules/nrfx/mdk -T${NRF5_LINKER_SCRIPT_MCUBOOT} -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16 -Wl,--gc-sections -Wl,--print-memory-usage --specs=nano.specs -lc -lnosys -lm -Wl,-Map=${EXECUTABLE_MCUBOOT_FILE_NAME}.map"
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
)
add_custom_command(TARGET ${EXECUTABLE_MCUBOOT_NAME}
POST_BUILD
All output files (bin, hex, image, dfu) contain the version of the project in their filename. Update Docker build script accordingly. Also fix permission issue with docker build (all files belonged to root).
2020-08-19 15:52:46 -04:00
COMMAND ${CMAKE_SIZE_UTIL} ${EXECUTABLE_MCUBOOT_FILE_NAME}.out
COMMAND ${CMAKE_OBJCOPY} -O binary ${EXECUTABLE_MCUBOOT_FILE_NAME}.out "${EXECUTABLE_MCUBOOT_FILE_NAME}.bin"
COMMAND ${CMAKE_OBJCOPY} -O ihex ${EXECUTABLE_MCUBOOT_FILE_NAME}.out "${EXECUTABLE_MCUBOOT_FILE_NAME}.hex"
Fix filename of the MCUBoot image and recovery MCUBoot image in CMake files. This will fix the generation of output files at the end of the build process.
2022-07-08 11:59:51 -04:00
COMMAND ${CMAKE_SOURCE_DIR}/tools/mcuboot/imgtool.py create --align 4 --version 1.0.0 --header-size 32 --slot-size 475136 --pad-header ${EXECUTABLE_MCUBOOT_FILE_NAME}.hex ${IMAGE_MCUBOOT_FILE_NAME_HEX}
COMMAND ${CMAKE_SOURCE_DIR}/tools/mcuboot/imgtool.py create --align 4 --version 1.0.0 --header-size 32 --slot-size 475136 --pad-header ${EXECUTABLE_MCUBOOT_FILE_NAME}.bin ${IMAGE_MCUBOOT_FILE_NAME_BIN}
All output files (bin, hex, image, dfu) contain the version of the project in their filename. Update Docker build script accordingly. Also fix permission issue with docker build (all files belonged to root).
2020-08-19 15:52:46 -04:00
COMMENT "post build steps for ${EXECUTABLE_MCUBOOT_FILE_NAME}"
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
)
Refactor CMake files to allow building 2 binaries : one standalone and one compatible with mcuboot bootloader (the offset in memory is different). Add documentation about mcuboot image generation and OTA. Re-enable watchdog
2020-05-24 10:36:04 -04:00
Small improvement in generate-fonts.py following code review. Add lv_img_conf in Docker image to build resources at build time.
2022-09-11 06:43:30 -04:00
if(BUILD_RESOURCES)
add_dependencies(${EXECUTABLE_MCUBOOT_NAME} GenerateResources)
endif()
Add new cmake option to disable the generation of DFU file (which needs adafruit-nrfutil on the build machine) : BUILD_DFU (disabled by default, enabled in docker build).
2021-02-01 15:07:53 -05:00
if(BUILD_DFU)
CMake: Fix indentation
2022-05-10 16:17:18 -04:00
add_custom_command(TARGET ${EXECUTABLE_MCUBOOT_NAME}
POST_BUILD
Fix filename of the MCUBoot image and recovery MCUBoot image in CMake files. This will fix the generation of output files at the end of the build process.
2022-07-08 11:59:51 -04:00
COMMAND adafruit-nrfutil dfu genpkg --dev-type 0x0052 --application ${IMAGE_MCUBOOT_FILE_NAME_HEX} ${DFU_MCUBOOT_FILE_NAME}
CMake: Fix indentation
2022-05-10 16:17:18 -04:00
COMMENT "post build (DFU) steps for ${EXECUTABLE_MCUBOOT_FILE_NAME}"
)
Add new cmake option to disable the generation of DFU file (which needs adafruit-nrfutil on the build machine) : BUILD_DFU (disabled by default, enabled in docker build).
2021-02-01 15:07:53 -05:00
endif()
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
# InfiniTime recovery firmware (autonomous)
set(EXECUTABLE_RECOVERY_NAME "pinetime-recovery")
set(EXECUTABLE_RECOVERY_FILE_NAME ${EXECUTABLE_RECOVERY_NAME}-${pinetime_VERSION_MAJOR}.${pinetime_VERSION_MINOR}.${pinetime_VERSION_PATCH})
add_executable(${EXECUTABLE_RECOVERY_NAME} ${RECOVERY_SOURCE_FILES})
generalize lv-font creation In https://github.com/InfiniTimeOrg/InfiniTime/pull/1097 new font generation capabilites were added. Generalize the font creation to make it possible to reuse the `displayapp/fonts/CMakeLists.txt` file for `InfiniSim` and just add the new cmake file to the project and link against the new `infinitime_fonts` target. In the following a list of changes. Allow non-global installed `lv_font_conv` executable installed with ```sh npm install lv_font_conv@1.5.2 ``` In CMake we search for `lv_font_conv` executable. Add the found executable to the python script `generate.py`, to remove the need for `lv_font_conv` to be in the path. Search for `python3` executable, if CMake version 3.12 is available. Otherwise use `python` as hard coded executable. Instead of adding the generated fonts to `SOURCE_FILES` variable, create a static library `infinitime_fonts`. Link this library to the executables instead. Use `add_custom_target()` together with `add_custom_command()` to generate the font.c files once (like the original PR does).
2022-05-10 17:48:41 -04:00
target_link_libraries(${EXECUTABLE_RECOVERY_NAME} nimble nrf-sdk littlefs QCBOR infinitime_fonts)
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
set_target_properties(${EXECUTABLE_RECOVERY_NAME} PROPERTIES OUTPUT_NAME ${EXECUTABLE_RECOVERY_FILE_NAME})
target_compile_definitions(${EXECUTABLE_RECOVERY_NAME} PUBLIC "PINETIME_IS_RECOVERY")
target_compile_options(${EXECUTABLE_RECOVERY_NAME} PUBLIC
Enable various compilation flags to reduce the binary size (#401) * Add the following compilation flags: * -fno-exceptions and -fno-non-call-exceptions : disable exception handling * -fno-rtti : disable run time type information (needed by dynamic_cast, for example) These flags reduce the binary size by about 100KB! Also, -fstack-usage generate debug info (not in final binary) to allow tools like Puncover to do a stack analysis. * Remove unused CMake variables in CMake_nRF5x.cmake (duplicated in src/CMakeLists.txt). Replace -O0 by -Og in DEBUG builds. This generates a smaller binary (small enough for the internal memory) that is debugger friendly.
2021-06-01 15:03:01 -04:00
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Og -g3>
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Os>
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Og -g3 -fno-rtti>
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Os -fno-rtti>
Refactored src/CMakelist to support C++14 and cleanup up redundant/incorrect -std= directives
2021-03-03 10:27:32 -05:00
$<$<COMPILE_LANGUAGE:ASM>: -MP -MD -x assembler-with-cpp>
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
)
Add new target (pinetime-graphics) that flash the bootloader logo into the spi flash memory.
2020-06-06 13:28:01 -04:00
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
set_target_properties(${EXECUTABLE_RECOVERY_NAME} PROPERTIES
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
SUFFIX ".out"
Add memory print usage
2021-08-16 10:42:42 -04:00
LINK_FLAGS "-mthumb -mabi=aapcs -L ${NRF5_SDK_PATH}/modules/nrfx/mdk -T${NRF5_LINKER_SCRIPT} -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16 -Wl,--gc-sections -Wl,--print-memory-usage --specs=nano.specs -lc -lnosys -lm -Wl,-Map=${EXECUTABLE_RECOVERY_FILE_NAME}.map"
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
)
Add new target (pinetime-graphics) that flash the bootloader logo into the spi flash memory.
2020-06-06 13:28:01 -04:00
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
add_custom_command(TARGET ${EXECUTABLE_RECOVERY_NAME}
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
POST_BUILD
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
COMMAND ${CMAKE_SIZE_UTIL} ${EXECUTABLE_RECOVERY_FILE_NAME}.out
COMMAND ${CMAKE_OBJCOPY} -O binary ${EXECUTABLE_RECOVERY_FILE_NAME}.out "${EXECUTABLE_RECOVERY_FILE_NAME}.bin"
COMMAND ${CMAKE_OBJCOPY} -O ihex ${EXECUTABLE_RECOVERY_FILE_NAME}.out "${EXECUTABLE_RECOVERY_FILE_NAME}.hex"
COMMENT "post build steps for ${EXECUTABLE_RECOVERY_FILE_NAME}"
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
)
Add new target (pinetime-graphics) that flash the bootloader logo into the spi flash memory.
2020-06-06 13:28:01 -04:00
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
# InfiniTime recovery firmware (mcuboot)
set(EXECUTABLE_RECOVERY_MCUBOOT_NAME "pinetime-mcuboot-recovery")
set(EXECUTABLE_RECOVERY_MCUBOOT_FILE_NAME ${EXECUTABLE_RECOVERY_MCUBOOT_NAME}-${pinetime_VERSION_MAJOR}.${pinetime_VERSION_MINOR}.${pinetime_VERSION_PATCH})
Fix filename of the MCUBoot image and recovery MCUBoot image in CMake files. This will fix the generation of output files at the end of the build process.
2022-07-08 11:59:51 -04:00
set(IMAGE_RECOVERY_MCUBOOT_FILE_NAME ${EXECUTABLE_RECOVERY_MCUBOOT_NAME}-image-${pinetime_VERSION_MAJOR}.${pinetime_VERSION_MINOR}.${pinetime_VERSION_PATCH})
set(IMAGE_RECOVERY_MCUBOOT_FILE_NAME_HEX ${IMAGE_RECOVERY_MCUBOOT_FILE_NAME}.hex)
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
set(DFU_RECOVERY_MCUBOOT_FILE_NAME ${EXECUTABLE_RECOVERY_MCUBOOT_NAME}-dfu-${pinetime_VERSION_MAJOR}.${pinetime_VERSION_MINOR}.${pinetime_VERSION_PATCH}.zip)
add_executable(${EXECUTABLE_RECOVERY_MCUBOOT_NAME} ${RECOVERY_SOURCE_FILES})
generalize lv-font creation In https://github.com/InfiniTimeOrg/InfiniTime/pull/1097 new font generation capabilites were added. Generalize the font creation to make it possible to reuse the `displayapp/fonts/CMakeLists.txt` file for `InfiniSim` and just add the new cmake file to the project and link against the new `infinitime_fonts` target. In the following a list of changes. Allow non-global installed `lv_font_conv` executable installed with ```sh npm install lv_font_conv@1.5.2 ``` In CMake we search for `lv_font_conv` executable. Add the found executable to the python script `generate.py`, to remove the need for `lv_font_conv` to be in the path. Search for `python3` executable, if CMake version 3.12 is available. Otherwise use `python` as hard coded executable. Instead of adding the generated fonts to `SOURCE_FILES` variable, create a static library `infinitime_fonts`. Link this library to the executables instead. Use `add_custom_target()` together with `add_custom_command()` to generate the font.c files once (like the original PR does).
2022-05-10 17:48:41 -04:00
target_link_libraries(${EXECUTABLE_RECOVERY_MCUBOOT_NAME} nimble nrf-sdk littlefs QCBOR infinitime_fonts)
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
set_target_properties(${EXECUTABLE_RECOVERY_MCUBOOT_NAME} PROPERTIES OUTPUT_NAME ${EXECUTABLE_RECOVERY_MCUBOOT_FILE_NAME})
target_compile_definitions(${EXECUTABLE_RECOVERY_MCUBOOT_NAME} PUBLIC "PINETIME_IS_RECOVERY")
target_compile_options(${EXECUTABLE_RECOVERY_MCUBOOT_NAME} PUBLIC
Enable various compilation flags to reduce the binary size (#401) * Add the following compilation flags: * -fno-exceptions and -fno-non-call-exceptions : disable exception handling * -fno-rtti : disable run time type information (needed by dynamic_cast, for example) These flags reduce the binary size by about 100KB! Also, -fstack-usage generate debug info (not in final binary) to allow tools like Puncover to do a stack analysis. * Remove unused CMake variables in CMake_nRF5x.cmake (duplicated in src/CMakeLists.txt). Replace -O0 by -Og in DEBUG builds. This generates a smaller binary (small enough for the internal memory) that is debugger friendly.
2021-06-01 15:03:01 -04:00
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Og -g3>
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Os>
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Og -g3 -fno-rtti>
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Os -fno-rtti>
Refactored src/CMakelist to support C++14 and cleanup up redundant/incorrect -std= directives
2021-03-03 10:27:32 -05:00
$<$<COMPILE_LANGUAGE:ASM>: -MP -MD -x assembler-with-cpp>
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
)
Add new target (pinetime-graphics) that flash the bootloader logo into the spi flash memory.
2020-06-06 13:28:01 -04:00
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
set_target_properties(${EXECUTABLE_RECOVERY_MCUBOOT_NAME} PROPERTIES
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
SUFFIX ".out"
fix wrong linker script introduced in https://github.com/JF002/InfiniTime/commit/58a2d000c4d49d96121894d6dd6bb861d7564bea
2021-04-14 00:01:14 -04:00
LINK_FLAGS "-mthumb -mabi=aapcs -L ${NRF5_SDK_PATH}/modules/nrfx/mdk -T${NRF5_LINKER_SCRIPT_MCUBOOT} -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16 -Wl,--gc-sections -Wl,--print-memory-usage --specs=nano.specs -lc -lnosys -lm -Wl,-Map=${EXECUTABLE_GRAPHICS_FILE_NAME}.map"
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
)
Add new target (pinetime-graphics) that flash the bootloader logo into the spi flash memory.
2020-06-06 13:28:01 -04:00
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
add_custom_command(TARGET ${EXECUTABLE_RECOVERY_MCUBOOT_NAME}
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
POST_BUILD
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
COMMAND ${CMAKE_SIZE_UTIL} ${EXECUTABLE_RECOVERY_MCUBOOT_FILE_NAME}.out
COMMAND ${CMAKE_OBJCOPY} -O binary ${EXECUTABLE_RECOVERY_MCUBOOT_FILE_NAME}.out "${EXECUTABLE_RECOVERY_MCUBOOT_FILE_NAME}.bin"
src/CMakeLists.txt: use iHEX format for mcuboot image creation for better control of addresses used by img/fw + fix typo (RECOVERYY)
2021-04-01 06:02:43 -04:00
COMMAND ${CMAKE_OBJCOPY} -O ihex ${EXECUTABLE_RECOVERY_MCUBOOT_FILE_NAME}.out "${EXECUTABLE_RECOVERY_MCUBOOT_FILE_NAME}.hex"
Fix filename of the MCUBoot image and recovery MCUBoot image in CMake files. This will fix the generation of output files at the end of the build process.
2022-07-08 11:59:51 -04:00
COMMAND ${CMAKE_SOURCE_DIR}/tools/mcuboot/imgtool.py create --align 4 --version 1.0.0 --header-size 32 --slot-size 475136 --pad-header ${EXECUTABLE_RECOVERY_MCUBOOT_FILE_NAME}.hex ${IMAGE_RECOVERY_MCUBOOT_FILE_NAME_HEX}
COMMAND ${CMAKE_OBJCOPY} -I ihex -O binary ${IMAGE_RECOVERY_MCUBOOT_FILE_NAME_HEX} "${IMAGE_RECOVERY_MCUBOOT_FILE_NAME}.bin"
src/CMakeLists.txt: use iHEX format for mcuboot image creation for better control of addresses used by img/fw + fix typo (RECOVERYY)
2021-04-01 06:02:43 -04:00
COMMAND python3 ${CMAKE_SOURCE_DIR}/tools/bin2c.py ${IMAGE_RECOVERY_MCUBOOT_FILE_NAME}.bin recoveryImage > recoveryImage.h
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
COMMENT "post build steps for ${EXECUTABLE_RECOVERY_MCUBOOT_FILE_NAME}"
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
)
Add new target (pinetime-graphics) that flash the bootloader logo into the spi flash memory.
2020-06-06 13:28:01 -04:00
Add new cmake option to disable the generation of DFU file (which needs adafruit-nrfutil on the build machine) : BUILD_DFU (disabled by default, enabled in docker build).
2021-02-01 15:07:53 -05:00
if(BUILD_DFU)
CMake: Fix indentation
2022-05-10 16:17:18 -04:00
add_custom_command(TARGET ${EXECUTABLE_RECOVERY_MCUBOOT_NAME}
POST_BUILD
Fix filename of the MCUBoot image and recovery MCUBoot image in CMake files. This will fix the generation of output files at the end of the build process.
2022-07-08 11:59:51 -04:00
COMMAND adafruit-nrfutil dfu genpkg --dev-type 0x0052 --application ${IMAGE_RECOVERY_MCUBOOT_FILE_NAME_HEX} ${DFU_RECOVERY_MCUBOOT_FILE_NAME}
CMake: Fix indentation
2022-05-10 16:17:18 -04:00
COMMENT "post build (DFU) steps for ${EXECUTABLE_RECOVERY_MCUBOOT_FILE_NAME}"
)
Add new cmake option to disable the generation of DFU file (which needs adafruit-nrfutil on the build machine) : BUILD_DFU (disabled by default, enabled in docker build).
2021-02-01 15:07:53 -05:00
endif()
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
# Build binary that writes the recovery image into the SPI flash memory
set(EXECUTABLE_RECOVERYLOADER_NAME "pinetime-recovery-loader")
set(EXECUTABLE_RECOVERYLOADER_FILE_NAME ${EXECUTABLE_RECOVERYLOADER_NAME}-${pinetime_VERSION_MAJOR}.${pinetime_VERSION_MINOR}.${pinetime_VERSION_PATCH})
add_executable(${EXECUTABLE_RECOVERYLOADER_NAME} ${RECOVERYLOADER_SOURCE_FILES})
generalize lv-font creation In https://github.com/InfiniTimeOrg/InfiniTime/pull/1097 new font generation capabilites were added. Generalize the font creation to make it possible to reuse the `displayapp/fonts/CMakeLists.txt` file for `InfiniSim` and just add the new cmake file to the project and link against the new `infinitime_fonts` target. In the following a list of changes. Allow non-global installed `lv_font_conv` executable installed with ```sh npm install lv_font_conv@1.5.2 ``` In CMake we search for `lv_font_conv` executable. Add the found executable to the python script `generate.py`, to remove the need for `lv_font_conv` to be in the path. Search for `python3` executable, if CMake version 3.12 is available. Otherwise use `python` as hard coded executable. Instead of adding the generated fonts to `SOURCE_FILES` variable, create a static library `infinitime_fonts`. Link this library to the executables instead. Use `add_custom_target()` together with `add_custom_command()` to generate the font.c files once (like the original PR does).
2022-05-10 17:48:41 -04:00
target_link_libraries(${EXECUTABLE_RECOVERYLOADER_NAME} nrf-sdk QCBOR infinitime_fonts)
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
set_target_properties(${EXECUTABLE_RECOVERYLOADER_NAME} PROPERTIES OUTPUT_NAME ${EXECUTABLE_RECOVERYLOADER_FILE_NAME})
target_compile_options(${EXECUTABLE_RECOVERYLOADER_NAME} PUBLIC
Enable various compilation flags to reduce the binary size (#401) * Add the following compilation flags: * -fno-exceptions and -fno-non-call-exceptions : disable exception handling * -fno-rtti : disable run time type information (needed by dynamic_cast, for example) These flags reduce the binary size by about 100KB! Also, -fstack-usage generate debug info (not in final binary) to allow tools like Puncover to do a stack analysis. * Remove unused CMake variables in CMake_nRF5x.cmake (duplicated in src/CMakeLists.txt). Replace -O0 by -Og in DEBUG builds. This generates a smaller binary (small enough for the internal memory) that is debugger friendly.
2021-06-01 15:03:01 -04:00
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Og -g3>
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Os>
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Og -g3 -fno-rtti>
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Os -fno-rtti>
Merge branch 'develop' into recovery-firmware # Conflicts: # src/CMakeLists.txt # src/displayapp/DisplayApp.h # src/systemtask/SystemTask.cpp # src/systemtask/SystemTask.h
2021-03-07 02:44:14 -05:00
$<$<COMPILE_LANGUAGE:ASM>: -MP -MD -x assembler-with-cpp>
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
)
target_include_directories(${EXECUTABLE_RECOVERYLOADER_NAME} PUBLIC
$<BUILD_INTERFACE:${CMAKE_BINARY_DIR}/src>
)
add_dependencies(${EXECUTABLE_RECOVERYLOADER_NAME} ${EXECUTABLE_RECOVERY_MCUBOOT_NAME})
set_target_properties(${EXECUTABLE_RECOVERYLOADER_NAME} PROPERTIES
SUFFIX ".out"
Add memory print usage
2021-08-16 10:42:42 -04:00
LINK_FLAGS "-mthumb -mabi=aapcs -L ${NRF5_SDK_PATH}/modules/nrfx/mdk -T${NRF5_LINKER_SCRIPT} -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16 -Wl,--gc-sections -Wl,--print-memory-usage --specs=nano.specs -lc -lnosys -lm -Wl,-Map=${EXECUTABLE_RECOVERYLOADER_FILE_NAME}.map"
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
)
add_custom_command(TARGET ${EXECUTABLE_RECOVERYLOADER_NAME}
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
POST_BUILD
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
COMMAND ${CMAKE_SIZE_UTIL} ${EXECUTABLE_RECOVERYLOADER_FILE_NAME}.out
COMMAND ${CMAKE_OBJCOPY} -O binary ${EXECUTABLE_RECOVERYLOADER_FILE_NAME}.out "${EXECUTABLE_RECOVERYLOADER_FILE_NAME}.bin"
COMMAND ${CMAKE_OBJCOPY} -O ihex ${EXECUTABLE_RECOVERYLOADER_FILE_NAME}.out "${EXECUTABLE_RECOVERYLOADER_FILE_NAME}.hex"
COMMENT "post build steps for ${EXECUTABLE_RECOVERYLOADER_FILE_NAME}"
Reformatted the CMakeLists for consistency
2020-10-02 14:43:30 -04:00
)
Add new target (pinetime-graphics) that flash the bootloader logo into the spi flash memory.
2020-06-06 13:28:01 -04:00
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
# Build binary that writes the recovery image (MCUBoot version)
set(EXECUTABLE_MCUBOOT_RECOVERYLOADER_NAME "pinetime-mcuboot-recovery-loader")
set(EXECUTABLE_MCUBOOT_RECOVERYLOADER_FILE_NAME ${EXECUTABLE_MCUBOOT_RECOVERYLOADER_NAME}-${pinetime_VERSION_MAJOR}.${pinetime_VERSION_MINOR}.${pinetime_VERSION_PATCH})
Fix filename of the MCUBoot image and recovery MCUBoot image in CMake files. This will fix the generation of output files at the end of the build process.
2022-07-08 11:59:51 -04:00
set(IMAGE_MCUBOOT_RECOVERYLOADER_FILE_NAME ${EXECUTABLE_MCUBOOT_RECOVERYLOADER_NAME}-image-${pinetime_VERSION_MAJOR}.${pinetime_VERSION_MINOR}.${pinetime_VERSION_PATCH})
set(IMAGE_MCUBOOT_RECOVERYLOADER_FILE_NAME_HEX ${IMAGE_MCUBOOT_RECOVERYLOADER_FILE_NAME}.hex)
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
set(DFU_MCUBOOT_RECOVERYLOADER_FILE_NAME ${EXECUTABLE_MCUBOOT_RECOVERYLOADER_NAME}-dfu-${pinetime_VERSION_MAJOR}.${pinetime_VERSION_MINOR}.${pinetime_VERSION_PATCH}.zip)
add_executable(${EXECUTABLE_MCUBOOT_RECOVERYLOADER_NAME} ${RECOVERYLOADER_SOURCE_FILES})
generalize lv-font creation In https://github.com/InfiniTimeOrg/InfiniTime/pull/1097 new font generation capabilites were added. Generalize the font creation to make it possible to reuse the `displayapp/fonts/CMakeLists.txt` file for `InfiniSim` and just add the new cmake file to the project and link against the new `infinitime_fonts` target. In the following a list of changes. Allow non-global installed `lv_font_conv` executable installed with ```sh npm install lv_font_conv@1.5.2 ``` In CMake we search for `lv_font_conv` executable. Add the found executable to the python script `generate.py`, to remove the need for `lv_font_conv` to be in the path. Search for `python3` executable, if CMake version 3.12 is available. Otherwise use `python` as hard coded executable. Instead of adding the generated fonts to `SOURCE_FILES` variable, create a static library `infinitime_fonts`. Link this library to the executables instead. Use `add_custom_target()` together with `add_custom_command()` to generate the font.c files once (like the original PR does).
2022-05-10 17:48:41 -04:00
target_link_libraries(${EXECUTABLE_MCUBOOT_RECOVERYLOADER_NAME} nrf-sdk QCBOR infinitime_fonts)
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
set_target_properties(${EXECUTABLE_MCUBOOT_RECOVERYLOADER_NAME} PROPERTIES OUTPUT_NAME ${EXECUTABLE_MCUBOOT_RECOVERYLOADER_FILE_NAME})
target_compile_options(${EXECUTABLE_MCUBOOT_RECOVERYLOADER_NAME} PUBLIC
Enable various compilation flags to reduce the binary size (#401) * Add the following compilation flags: * -fno-exceptions and -fno-non-call-exceptions : disable exception handling * -fno-rtti : disable run time type information (needed by dynamic_cast, for example) These flags reduce the binary size by about 100KB! Also, -fstack-usage generate debug info (not in final binary) to allow tools like Puncover to do a stack analysis. * Remove unused CMake variables in CMake_nRF5x.cmake (duplicated in src/CMakeLists.txt). Replace -O0 by -Og in DEBUG builds. This generates a smaller binary (small enough for the internal memory) that is debugger friendly.
2021-06-01 15:03:01 -04:00
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Og -g3>
$<$<AND:$<COMPILE_LANGUAGE:C>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Os>
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:DEBUG>>: ${COMMON_FLAGS} -Og -g3 -fno-rtti>
$<$<AND:$<COMPILE_LANGUAGE:CXX>,$<CONFIG:RELEASE>>: ${COMMON_FLAGS} -Os -fno-rtti>
Merge branch 'develop' into recovery-firmware # Conflicts: # src/CMakeLists.txt # src/displayapp/DisplayApp.h # src/systemtask/SystemTask.cpp # src/systemtask/SystemTask.h
2021-03-07 02:44:14 -05:00
$<$<COMPILE_LANGUAGE:ASM>: -MP -MD -x assembler-with-cpp>
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
)
target_include_directories(${EXECUTABLE_MCUBOOT_RECOVERYLOADER_NAME} PUBLIC
$<BUILD_INTERFACE:${CMAKE_BINARY_DIR}/src>
)
add_dependencies(${EXECUTABLE_MCUBOOT_RECOVERYLOADER_NAME} ${EXECUTABLE_RECOVERY_MCUBOOT_NAME})
set_target_properties(${EXECUTABLE_MCUBOOT_RECOVERYLOADER_NAME} PROPERTIES
SUFFIX ".out"
Add memory print usage
2021-08-16 10:42:42 -04:00
LINK_FLAGS "-mthumb -mabi=aapcs -std=gnu++98 -std=c99 -L ${NRF5_SDK_PATH}/modules/nrfx/mdk -T${NRF5_LINKER_SCRIPT_MCUBOOT} -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16 -Wl,--gc-sections -Wl,--print-memory-usage --specs=nano.specs -lc -lnosys -lm -Wl,-Map=${EXECUTABLE_MCUBOOT_RECOVERYLOADER_FILE_NAME}.map"
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
)
add_custom_command(TARGET ${EXECUTABLE_MCUBOOT_RECOVERYLOADER_NAME}
POST_BUILD
COMMAND ${CMAKE_SIZE_UTIL} ${EXECUTABLE_MCUBOOT_RECOVERYLOADER_FILE_NAME}.out
COMMAND ${CMAKE_OBJCOPY} -O binary ${EXECUTABLE_MCUBOOT_RECOVERYLOADER_FILE_NAME}.out "${EXECUTABLE_MCUBOOT_RECOVERYLOADER_FILE_NAME}.bin"
COMMAND ${CMAKE_OBJCOPY} -O ihex ${EXECUTABLE_MCUBOOT_RECOVERYLOADER_FILE_NAME}.out "${EXECUTABLE_MCUBOOT_RECOVERYLOADER_FILE_NAME}.hex"
Fix filename of the MCUBoot image and recovery MCUBoot image in CMake files. This will fix the generation of output files at the end of the build process.
2022-07-08 11:59:51 -04:00
COMMAND ${CMAKE_SOURCE_DIR}/tools/mcuboot/imgtool.py create --align 4 --version 1.0.0 --header-size 32 --slot-size 475136 --pad-header ${EXECUTABLE_MCUBOOT_RECOVERYLOADER_FILE_NAME}.hex ${IMAGE_MCUBOOT_RECOVERYLOADER_FILE_NAME_HEX}
COMMAND ${CMAKE_OBJCOPY} -I ihex -O binary ${IMAGE_MCUBOOT_RECOVERYLOADER_FILE_NAME_HEX} "${IMAGE_MCUBOOT_RECOVERYLOADER_FILE_NAME}.bin"
src/CMakeLists.txt: use iHEX format for mcuboot image creation for better control of addresses used by img/fw + fix typo (RECOVERYY)
2021-04-01 06:02:43 -04:00
COMMAND python3 ${CMAKE_SOURCE_DIR}/tools/bin2c.py ${IMAGE_MCUBOOT_RECOVERYLOADER_FILE_NAME}.bin recoveryLoaderImage > recoveryLoaderImage.h
Generate pinetime-recovery : a light version of InfiniTime design to be used as a recovery firmware : it only provides basic UI and BLE connectivity for OTA. This new FW is build on the same codebasse than the actual InfiniTime. Only the display task is different (this allows to remove lvgl from the recovery fw, which is very heavy). CMake builds and docker have been modified accordingly. Note than the fw is converted into an image and then into a DFU in the cmake build (previously, it was only done in the
2021-01-26 14:31:45 -05:00
COMMENT "post build steps for ${EXECUTABLE_MCUBOOT_RECOVERYLOADER_FILE_NAME}"
)
Add new cmake option to disable the generation of DFU file (which needs adafruit-nrfutil on the build machine) : BUILD_DFU (disabled by default, enabled in docker build).
2021-02-01 15:07:53 -05:00
if(BUILD_DFU)
CMake: Fix indentation
2022-05-10 16:17:18 -04:00
add_custom_command(TARGET ${EXECUTABLE_MCUBOOT_RECOVERYLOADER_NAME}
POST_BUILD
Fix filename of the MCUBoot image and recovery MCUBoot image in CMake files. This will fix the generation of output files at the end of the build process.
2022-07-08 11:59:51 -04:00
COMMAND adafruit-nrfutil dfu genpkg --dev-type 0x0052 --application ${IMAGE_MCUBOOT_RECOVERYLOADER_FILE_NAME_HEX} ${DFU_MCUBOOT_RECOVERYLOADER_FILE_NAME}
CMake: Fix indentation
2022-05-10 16:17:18 -04:00
COMMENT "post build (DFU) steps for ${EXECUTABLE_MCUBOOT_RECOVERYLOADER_FILE_NAME}"
)
Add new cmake option to disable the generation of DFU file (which needs adafruit-nrfutil on the build machine) : BUILD_DFU (disabled by default, enabled in docker build).
2021-02-01 15:07:53 -05:00
endif()
Small improvement in generate-fonts.py following code review. Add lv_img_conf in Docker image to build resources at build time.
2022-09-11 06:43:30 -04:00
if(BUILD_RESOURCES)
add_subdirectory(resources)
endif()
Package resources + a metadata file into a single .zip file.
2022-08-22 15:24:25 -04:00
Reference in a new issue Copy permalink