scott/InfiniTime
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases 1 Wiki Activity

Refactored Ppg for frequency based algorithm. (#1486)

Browse source 
New implementation of the heart rate sensor data processing using a frequency based PPG algorithm.
The HRS3300 settings are fine-tuned for better signal to noise at 10Hz.
The measurement delay is now set to 100ms.
Enable and use the ambient light sensor.
FFT implementation based on ArduinoFFT (https://github.com/kosme/arduinoFFT, GPLv3.0).
This commit is contained in:
Ceimour 2023-04-30 08:50:18 -05:00 committed by GitHub
parent 40f7e1c7be
commit c22e30a4a6
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
26 changed files with 2675 additions and 210 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

12
src/CMakeLists.txt
View file

@ -488,10 +488,8 @@ list(APPEND SOURCE_FILES
drivers/TwiMaster.cpp drivers/TwiMaster.cpp
heartratetask/HeartRateTask.cpp heartratetask/HeartRateTask.cpp
components/heartrate/Ppg.cpp
components/heartrate/Biquad.cpp
components/heartrate/Ptagc.cpp
components/heartrate/HeartRateController.cpp components/heartrate/HeartRateController.cpp
components/heartrate/Ppg.cpp
buttonhandler/ButtonHandler.cpp buttonhandler/ButtonHandler.cpp
touchhandler/TouchHandler.cpp touchhandler/TouchHandler.cpp
@ -552,8 +550,7 @@ list(APPEND RECOVERY_SOURCE_FILES
components/heartrate/HeartRateController.cpp components/heartrate/HeartRateController.cpp
heartratetask/HeartRateTask.cpp heartratetask/HeartRateTask.cpp
components/heartrate/Ppg.cpp components/heartrate/Ppg.cpp
components/heartrate/Biquad.cpp
components/heartrate/Ptagc.cpp
components/motor/MotorController.cpp components/motor/MotorController.cpp
components/fs/FS.cpp components/fs/FS.cpp
buttonhandler/ButtonHandler.cpp buttonhandler/ButtonHandler.cpp
@ -666,9 +663,10 @@ set(INCLUDE_FILES
drivers/TwiMaster.h drivers/TwiMaster.h
heartratetask/HeartRateTask.h heartratetask/HeartRateTask.h
components/heartrate/Ppg.h components/heartrate/Ppg.h
components/heartrate/Biquad.h
components/heartrate/Ptagc.h
components/heartrate/HeartRateController.h components/heartrate/HeartRateController.h
libs/arduinoFFT-develop/src/arduinoFFT.h
libs/arduinoFFT-develop/src/defs.h
libs/arduinoFFT-develop/src/types.h
components/motor/MotorController.h components/motor/MotorController.h
buttonhandler/ButtonHandler.h buttonhandler/ButtonHandler.h
touchhandler/TouchHandler.h touchhandler/TouchHandler.h

26
src/components/heartrate/Biquad.cpp
View file

@ -1,26 +0,0 @@
/*
SPDX-License-Identifier: LGPL-3.0-or-later
Original work Copyright (C) 2020 Daniel Thompson
C++ port Copyright (C) 2021 Jean-François Milants
*/
#include "components/heartrate/Biquad.h"
using namespace Pinetime::Controllers;
/** Original implementation from wasp-os : https://github.com/daniel-thompson/wasp-os/blob/master/wasp/ppg.py */
Biquad::Biquad(float b0, float b1, float b2, float a1, float a2) : b0 {b0}, b1 {b1}, b2 {b2}, a1 {a1}, a2 {a2} {
}
float Biquad::Step(float x) {
auto v1 = this->v1;
auto v2 = this->v2;
auto v = x - (a1 * v1) - (a2 * v2);
auto y = (b0 * v) + (b1 * v1) + (b2 * v2);
this->v2 = v1;
this->v1 = v;
return y;
}

22
src/components/heartrate/Biquad.h
View file

@ -1,22 +0,0 @@
#pragma once
namespace Pinetime {
namespace Controllers {
/// Direct Form II Biquad Filter
class Biquad {
public:
Biquad(float b0, float b1, float b2, float a1, float a2);
float Step(float x);
private:
float b0;
float b1;
float b2;
float a1;
float a2;
float v1 = 0.0f;
float v2 = 0.0f;
};
}
}

339
src/components/heartrate/Ppg.cpp
View file

@ -1,107 +1,292 @@
/*
SPDX-License-Identifier: LGPL-3.0-or-later
Original work Copyright (C) 2020 Daniel Thompson
C++ port Copyright (C) 2021 Jean-François Milants
*/
#include "components/heartrate/Ppg.h" #include "components/heartrate/Ppg.h"
#include <vector>
#include <nrf_log.h> #include <nrf_log.h>
#include <vector>
using namespace Pinetime::Controllers; using namespace Pinetime::Controllers;
/** Original implementation from wasp-os : https://github.com/daniel-thompson/wasp-os/blob/master/wasp/ppg.py */
namespace { namespace {
int Compare(int8_t* d1, int8_t* d2, size_t count) { float LinearInterpolation(const float* xValues, const float* yValues, int length, float pointX) {
int e = 0; if (pointX > xValues[length - 1]) {
for (size_t i = 0; i < count; i++) { return yValues[length - 1];
auto d = d1[i] - d2[i]; } else if (pointX <= xValues[0]) {
e += d * d; return yValues[0];
} }
return e; int index = 0;
while (pointX > xValues[index] && index < length - 1) {
index++;
}
float pointX0 = xValues[index - 1];
float pointX1 = xValues[index];
float pointY0 = yValues[index - 1];
float pointY1 = yValues[index];
float mu = (pointX - pointX0) / (pointX1 - pointX0);
return (pointY0 * (1 - mu) + pointY1 * mu);
} }
int CompareShift(int8_t* d, int shift, size_t count) { float PeakSearch(float* xVals, float* yVals, float threshold, float& width, float start, float end, int length) {
return Compare(d + shift, d, count - shift); int peaks = 0;
bool enabled = false;
float minBin = 0.0f;
float maxBin = 0.0f;
float peakCenter = 0.0f;
float prevValue = LinearInterpolation(xVals, yVals, length, start - 0.01f);
float currValue = LinearInterpolation(xVals, yVals, length, start);
float idx = start;
while (idx < end) {
float nextValue = LinearInterpolation(xVals, yVals, length, idx + 0.01f);
if (currValue < threshold) {
enabled = true;
}
if (currValue >= threshold and enabled) {
if (prevValue < threshold) {
minBin = idx;
} else if (nextValue <= threshold) {
maxBin = idx;
peaks++;
width = maxBin - minBin;
peakCenter = width / 2.0f + minBin;
}
}
prevValue = currValue;
currValue = nextValue;
idx += 0.01f;
}
if (peaks != 1) {
width = 0.0f;
peakCenter = 0.0f;
}
return peakCenter;
} }
int Trough(int8_t* d, size_t size, uint8_t mn, uint8_t mx) { float SpectrumMean(const std::array<float, Ppg::spectrumLength>& signal, int start, int end) {
auto z2 = CompareShift(d, mn - 2, size); int total = 0;
auto z1 = CompareShift(d, mn - 1, size); float mean = 0.0f;
for (int i = mn; i < mx + 1; i++) { for (int idx = start; idx < end; idx++) {
auto z = CompareShift(d, i, size); mean += signal.at(idx);
if (z2 > z1 && z1 < z) { total++;
return i;
} }
z2 = z1; if (total > 0) {
z1 = z; mean /= static_cast<float>(total);
}
return mean;
}
float SignalToNoise(const std::array<float, Ppg::spectrumLength>& signal, int start, int end, float max) {
float mean = SpectrumMean(signal, start, end);
return max / mean;
}
// Simple bandpass filter using exponential moving average
void Filter30to240(std::array<float, Ppg::dataLength>& signal) {
// From:
// https://www.norwegiancreations.com/2016/03/arduino-tutorial-simple-high-pass-band-pass-and-band-stop-filtering/
int length = signal.size();
// 0.268 is ~0.5Hz and 0.816 is ~4Hz cutoff at 10Hz sampling
float expAlpha = 0.816f;
float expAvg = 0.0f;
for (int loop = 0; loop < 4; loop++) {
expAvg = signal.front();
for (int idx = 0; idx < length; idx++) {
expAvg = (expAlpha * signal.at(idx)) + ((1 - expAlpha) * expAvg);
signal[idx] = expAvg;
}
}
expAlpha = 0.268f;
for (int loop = 0; loop < 4; loop++) {
expAvg = signal.front();
for (int idx = 0; idx < length; idx++) {
expAvg = (expAlpha * signal.at(idx)) + ((1 - expAlpha) * expAvg);
signal[idx] -= expAvg;
} }
return -1;
} }
} }
Ppg::Ppg() float SpectrumMax(const std::array<float, Ppg::spectrumLength>& data, int start, int end) {
: hpf {0.87033078, -1.74066156, 0.87033078, -1.72377617, 0.75754694}, float max = 0.0f;
agc {20, 0.971, 2}, for (int idx = start; idx < end; idx++) {
lpf {0.11595249, 0.23190498, 0.11595249, -0.72168143, 0.18549138} { if (data.at(idx) > max) {
max = data.at(idx);
}
}
return max;
} }
int8_t Ppg::Preprocess(float spl) { void Detrend(std::array<float, Ppg::dataLength>& signal) {
spl -= offset; int size = signal.size();
spl = hpf.Step(spl); float offset = signal.front();
spl = agc.Step(spl); float slope = (signal.at(size - 1) - offset) / static_cast<float>(size - 1);
spl = lpf.Step(spl);
auto spl_int = static_cast<int8_t>(spl); for (int idx = 0; idx < size; idx++) {
signal[idx] -= (slope * static_cast<float>(idx) + offset);
if (dataIndex < 200) {
data[dataIndex++] = spl_int;
} }
return spl_int; for (int idx = 0; idx < size - 1; idx++) {
signal[idx] = signal[idx + 1] - signal[idx];
}
}
// Hanning Coefficients from numpy: python -c 'import numpy;print(numpy.hanning(64))'
// Note: Harcoded and must be updated if constexpr dataLength is changed. Prevents the need to
// use cosf() which results in an extra ~5KB in storage.
// This data is symetrical so just using the first half (saves 128B when dataLength is 64).
static constexpr float hanning[Ppg::dataLength >> 1] {
0.0f, 0.00248461f, 0.00991376f, 0.0222136f, 0.03926189f, 0.06088921f, 0.08688061f, 0.11697778f,
0.15088159f, 0.1882551f, 0.22872687f, 0.27189467f, 0.31732949f, 0.36457977f, 0.41317591f, 0.46263495f,
0.51246535f, 0.56217185f, 0.61126047f, 0.65924333f, 0.70564355f, 0.75f, 0.79187184f, 0.83084292f,
0.86652594f, 0.89856625f, 0.92664544f, 0.95048443f, 0.96984631f, 0.98453864f, 0.99441541f, 0.99937846f};
}
Ppg::Ppg() {
dataAverage.fill(0.0f);
spectrum.fill(0.0f);
}
int8_t Ppg::Preprocess(uint32_t hrs, uint32_t als) {
if (dataIndex < dataLength) {
dataHRS[dataIndex++] = hrs;
}
alsValue = als;
if (alsValue > alsThreshold) {
return 1;
}
return 0;
} }
int Ppg::HeartRate() { int Ppg::HeartRate() {
if (dataIndex < 200) { if (dataIndex < dataLength) {
return 0; return 0;
} }
int hr = 0;
NRF_LOG_INFO("PREPROCESS, offset = %d", offset); hr = ProcessHeartRate(resetSpectralAvg);
auto hr = ProcessHeartRate(); resetSpectralAvg = false;
dataIndex = 0; // Make room for overlapWindow number of new samples
for (int idx = 0; idx < dataLength - overlapWindow; idx++) {
dataHRS[idx] = dataHRS[idx + overlapWindow];
}
dataIndex = dataLength - overlapWindow;
return hr; return hr;
} }
int Ppg::ProcessHeartRate() { void Ppg::Reset(bool resetDaqBuffer) {
int t0 = Trough(data.data(), dataIndex, 7, 48); if (resetDaqBuffer) {
if (t0 < 0) {
return 0;
}
int t1 = t0 * 2;
t1 = Trough(data.data(), dataIndex, t1 - 5, t1 + 5);
if (t1 < 0) {
return 0;
}
int t2 = (t1 * 3) / 2;
t2 = Trough(data.data(), dataIndex, t2 - 5, t2 + 5);
if (t2 < 0) {
return 0;
}
int t3 = (t2 * 4) / 3;
t3 = Trough(data.data(), dataIndex, t3 - 4, t3 + 4);
if (t3 < 0) {
return (60 * 24 * 3) / t2;
}
return (60 * 24 * 4) / t3;
}
void Ppg::SetOffset(uint16_t offset) {
this->offset = offset;
dataIndex = 0; dataIndex = 0;
} }
avgIndex = 0;
void Ppg::Reset() { dataAverage.fill(0.0f);
dataIndex = 0; lastPeakLocation = 0.0f;
alsThreshold = UINT16_MAX;
alsValue = 0;
resetSpectralAvg = true;
spectrum.fill(0.0f);
}
// Pass init == true to reset spectral averaging.
// Returns -1 (Reset Acquisition), 0 (Unable to obtain HR) or HR (BPM).
int Ppg::ProcessHeartRate(bool init) {
std::copy(dataHRS.begin(), dataHRS.end(), vReal.begin());
Detrend(vReal);
Filter30to240(vReal);
vImag.fill(0.0f);
// Apply Hanning Window
int hannIdx = 0;
for (int idx = 0; idx < dataLength; idx++) {
if (idx >= dataLength >> 1) {
hannIdx--;
}
vReal[idx] *= hanning[hannIdx];
if (idx < dataLength >> 1) {
hannIdx++;
}
}
// Compute in place power spectrum
ArduinoFFT<float> FFT = ArduinoFFT<float>(vReal.data(), vImag.data(), dataLength, sampleFreq);
FFT.compute(FFTDirection::Forward);
FFT.complexToMagnitude();
FFT.~ArduinoFFT();
SpectrumAverage(vReal.data(), spectrum.data(), spectrum.size(), init);
peakLocation = 0.0f;
float threshold = peakDetectionThreshold;
float peakWidth = 0.0f;
int specLen = spectrum.size();
float max = SpectrumMax(spectrum, hrROIbegin, hrROIend);
float signalToNoiseRatio = SignalToNoise(spectrum, hrROIbegin, hrROIend, max);
if (signalToNoiseRatio > signalToNoiseThreshold && spectrum.at(0) < dcThreshold) {
threshold *= max;
// Reuse VImag for interpolation x values passed to PeakSearch
for (int idx = 0; idx < dataLength; idx++) {
vImag[idx] = idx;
}
peakLocation = PeakSearch(vImag.data(),
spectrum.data(),
threshold,
peakWidth,
static_cast<float>(hrROIbegin),
static_cast<float>(hrROIend),
specLen);
peakLocation *= freqResolution;
}
// Peak too wide? (broad spectrum noise or large, rapid HR change)
if (peakWidth > maxPeakWidth) {
peakLocation = 0.0f;
}
// Check HR limits
if (peakLocation < minHR || peakLocation > maxHR) {
peakLocation = 0.0f;
}
// Reset spectral averaging if bad reading
if (peakLocation == 0.0f) {
resetSpectralAvg = true;
}
// Set the ambient light threshold and return HR in BPM
alsThreshold = static_cast<uint16_t>(alsValue * alsFactor);
// Get current average HR. If HR reduced to zero, return -1 (reset) else HR
peakLocation = HeartRateAverage(peakLocation);
int rtn = -1;
if (peakLocation == 0.0f && lastPeakLocation > 0.0f) {
lastPeakLocation = 0.0f;
} else {
lastPeakLocation = peakLocation;
rtn = static_cast<int>((peakLocation * 60.0f) + 0.5f);
}
return rtn;
}
void Ppg::SpectrumAverage(const float* data, float* spectrum, int length, bool reset) {
if (reset) {
spectralAvgCount = 0;
}
float count = static_cast<float>(spectralAvgCount);
for (int idx = 0; idx < length; idx++) {
spectrum[idx] = (spectrum[idx] * count + data[idx]) / (count + 1);
}
if (spectralAvgCount < spectralAvgMax) {
spectralAvgCount++;
}
}
float Ppg::HeartRateAverage(float hr) {
avgIndex++;
avgIndex %= dataAverage.size();
dataAverage[avgIndex] = hr;
float avg = 0.0f;
float total = 0.0f;
float min = 300.0f;
float max = 0.0f;
for (const float& value : dataAverage) {
if (value > 0.0f) {
avg += value;
if (value < min)
min = value;
if (value > max)
max = value;
total++;
}
}
if (total > 0) {
avg /= total;
} else {
avg = 0.0f;
}
return avg;
} }

74
src/components/heartrate/Ppg.h
View file

@ -3,29 +3,77 @@
#include <array> #include <array>
#include <cstddef> #include <cstddef>
#include <cstdint> #include <cstdint>
#include "components/heartrate/Biquad.h" // Note: Change internal define 'sqrt_internal sqrt' to
#include "components/heartrate/Ptagc.h" // 'sqrt_internal sqrtf' to save ~3KB of flash.
#define FFT_SPEED_OVER_PRECISION
#include "libs/arduinoFFT-develop/src/arduinoFFT.h"
namespace Pinetime { namespace Pinetime {
namespace Controllers { namespace Controllers {
class Ppg { class Ppg {
public: public:
Ppg(); Ppg();
int8_t Preprocess(float spl); int8_t Preprocess(uint32_t hrs, uint32_t als);
int HeartRate(); int HeartRate();
void Reset(bool resetDaqBuffer);
void SetOffset(uint16_t offset); static constexpr int deltaTms = 100;
void Reset(); // Daq dataLength: Must be power of 2
static constexpr uint16_t dataLength = 64;
static constexpr uint16_t spectrumLength = dataLength >> 1;
private: private:
std::array<int8_t, 200> data; // The sampling frequency (Hz) based on sampling time in milliseconds (DeltaTms)
size_t dataIndex = 0; static constexpr float sampleFreq = 1000.0f / static_cast<float>(deltaTms);
float offset; // The frequency resolution (Hz)
Biquad hpf; static constexpr float freqResolution = sampleFreq / dataLength;
Ptagc agc; // Number of samples before each analysis
Biquad lpf; // 0.5 second update rate at 10Hz
static constexpr uint16_t overlapWindow = 5;
// Maximum number of spectrum running averages
// Note: actual number of spectra averaged = spectralAvgMax + 1
static constexpr uint16_t spectralAvgMax = 2;
// Multiple Peaks above this threshold (% of max) are rejected
static constexpr float peakDetectionThreshold = 0.6f;
// Maximum peak width (bins) at threshold for valid peak.
static constexpr float maxPeakWidth = 2.5f;
// Metric for spectrum noise level.
static constexpr float signalToNoiseThreshold = 3.0f;
// Heart rate Region Of Interest begin (bins)
static constexpr uint16_t hrROIbegin = static_cast<uint16_t>((30.0f / 60.0f) / freqResolution + 0.5f);
// Heart rate Region Of Interest end (bins)
static constexpr uint16_t hrROIend = static_cast<uint16_t>((240.0f / 60.0f) / freqResolution + 0.5f);
// Minimum HR (Hz)
static constexpr float minHR = 40.0f / 60.0f;
// Maximum HR (Hz)
static constexpr float maxHR = 230.0f / 60.0f;
// Threshold for high DC level after filtering
static constexpr float dcThreshold = 0.5f;
// ALS detection factor
static constexpr float alsFactor = 2.0f;
int ProcessHeartRate(); // Raw ADC data
std::array<uint16_t, dataLength> dataHRS;
// Stores Real numbers from FFT
std::array<float, dataLength> vReal;
// Stores Imaginary numbers from FFT
std::array<float, dataLength> vImag;
// Stores power spectrum calculated from FFT real and imag values
std::array<float, (spectrumLength)> spectrum;
// Stores each new HR value (Hz). Non zero values are averaged for HR output
std::array<float, 20> dataAverage;
uint16_t avgIndex = 0;
uint16_t spectralAvgCount = 0;
float lastPeakLocation = 0.0f;
uint16_t alsThreshold = UINT16_MAX;
uint16_t alsValue = 0;
uint16_t dataIndex = 0;
float peakLocation;
bool resetSpectralAvg = true;
int ProcessHeartRate(bool init);
float HeartRateAverage(float hr);
void SpectrumAverage(const float* data, float* spectrum, int length, bool reset);
}; };
} }
} }

29
src/components/heartrate/Ptagc.cpp
View file

@ -1,29 +0,0 @@
/*
SPDX-License-Identifier: LGPL-3.0-or-later
Original work Copyright (C) 2020 Daniel Thompson
C++ port Copyright (C) 2021 Jean-François Milants
*/
#include "components/heartrate/Ptagc.h"
#include <cmath>
using namespace Pinetime::Controllers;
/** Original implementation from wasp-os : https://github.com/daniel-thompson/wasp-os/blob/master/wasp/ppg.py */
Ptagc::Ptagc(float start, float decay, float threshold) : peak {start}, decay {decay}, boost {1.0f / decay}, threshold {threshold} {
}
float Ptagc::Step(float spl) {
if (std::abs(spl) > peak) {
peak *= boost;
} else {
peak *= decay;
}
if ((spl > (peak * threshold)) || (spl < (peak * -threshold))) {
return 0.0f;
}
spl = 100.0f * spl / (2.0f * peak);
return spl;
}

17
src/components/heartrate/Ptagc.h
View file

@ -1,17 +0,0 @@
#pragma once
namespace Pinetime {
namespace Controllers {
class Ptagc {
public:
Ptagc(float start, float decay, float threshold);
float Step(float spl);
private:
float peak;
float decay;
float boost;
float threshold;
};
}
}

24
src/drivers/Hrs3300.cpp
View file

@ -16,6 +16,8 @@ using namespace Pinetime::Drivers;
/** Driver for the HRS3300 heart rate sensor. /** Driver for the HRS3300 heart rate sensor.
* Original implementation from wasp-os : https://github.com/daniel-thompson/wasp-os/blob/master/wasp/drivers/hrs3300.py * Original implementation from wasp-os : https://github.com/daniel-thompson/wasp-os/blob/master/wasp/drivers/hrs3300.py
*
* Experimentaly derived changes to improve signal/noise (see comments below) - Ceimour
*/ */
Hrs3300::Hrs3300(TwiMaster& twiMaster, uint8_t twiAddress) : twiMaster {twiMaster}, twiAddress {twiAddress} { Hrs3300::Hrs3300(TwiMaster& twiMaster, uint8_t twiAddress) : twiMaster {twiMaster}, twiAddress {twiAddress} {
} }
@ -26,19 +28,21 @@ void Hrs3300::Init() {
Disable(); Disable();
vTaskDelay(100); vTaskDelay(100);
// HRS disabled, 12.5 ms wait time between cycles, (partly) 20mA drive // HRS disabled, 50ms wait time between ADC conversion period, current 12.5mA
WriteRegister(static_cast<uint8_t>(Registers::Enable), 0x60); WriteRegister(static_cast<uint8_t>(Registers::Enable), 0x50);
// (partly) 20mA drive, power on, "magic" (datasheet says both // Current 12.5mA and low nibble 0xF.
// "reserved" and "set low nibble to 8" but 0xe gives better results // Note: Setting low nibble to 0x8 per the datasheet results in
// and is used by at least two other HRS3300 drivers // modulated LED driver output. Setting to 0xF results in clean,
WriteRegister(static_cast<uint8_t>(Registers::PDriver), 0x6E); // steady output during the ADC conversion period.
WriteRegister(static_cast<uint8_t>(Registers::PDriver), 0x2f);
// HRS and ALS both in 16-bit mode // HRS and ALS both in 15-bit mode results in ~50ms LED drive period
WriteRegister(static_cast<uint8_t>(Registers::Res), 0x88); // and presumably ~50ms ADC conversion period.
WriteRegister(static_cast<uint8_t>(Registers::Res), 0x77);
// 8x gain, non default, reduced value for better readings // Gain set to 1x
WriteRegister(static_cast<uint8_t>(Registers::Hgain), 0xc); WriteRegister(static_cast<uint8_t>(Registers::Hgain), 0x00);
} }
void Hrs3300::Enable() { void Hrs3300::Enable() {

35
src/heartratetask/HeartRateTask.cpp
View file

@ -26,10 +26,11 @@ void HeartRateTask::Process(void* instance) {
void HeartRateTask::Work() { void HeartRateTask::Work() {
int lastBpm = 0; int lastBpm = 0;
while (true) { while (true) {
auto delay = portMAX_DELAY; Messages msg;
uint32_t delay;
if (state == States::Running) { if (state == States::Running) {
if (measurementStarted) { if (measurementStarted) {
delay = 40; delay = ppg.deltaTms;
} else { } else {
delay = 100; delay = 100;
} }
@ -37,8 +38,7 @@ void HeartRateTask::Work() {
delay = portMAX_DELAY; delay = portMAX_DELAY;
} }
Messages msg; if (xQueueReceive(messageQueue, &msg, delay)) {
if (xQueueReceive(messageQueue, &msg, delay) == pdTRUE) {
switch (msg) { switch (msg) {
case Messages::GoToSleep: case Messages::GoToSleep:
StopMeasurement(); StopMeasurement();
@ -70,12 +70,28 @@ void HeartRateTask::Work() {
} }
if (measurementStarted) { if (measurementStarted) {
ppg.Preprocess(static_cast<float>(heartRateSensor.ReadHrs())); int8_t ambient = ppg.Preprocess(heartRateSensor.ReadHrs(), heartRateSensor.ReadAls());
auto bpm = ppg.HeartRate(); int bpm = ppg.HeartRate();
// If ambient light detected or a reset requested (bpm < 0)
if (ambient > 0) {
// Reset all DAQ buffers
ppg.Reset(true);
// Force state to NotEnoughData (below)
lastBpm = 0;
bpm = 0;
} else if (bpm < 0) {
// Reset all DAQ buffers except HRS buffer
ppg.Reset(false);
// Set HR to zero and update
bpm = 0;
controller.Update(Controllers::HeartRateController::States::Running, bpm);
}
if (lastBpm == 0 && bpm == 0) { if (lastBpm == 0 && bpm == 0) {
controller.Update(Controllers::HeartRateController::States::NotEnoughData, 0); controller.Update(Controllers::HeartRateController::States::NotEnoughData, bpm);
} }
if (bpm != 0) { if (bpm != 0) {
lastBpm = bpm; lastBpm = bpm;
controller.Update(Controllers::HeartRateController::States::Running, lastBpm); controller.Update(Controllers::HeartRateController::States::Running, lastBpm);
@ -87,7 +103,7 @@ void HeartRateTask::Work() {
void HeartRateTask::PushMessage(HeartRateTask::Messages msg) { void HeartRateTask::PushMessage(HeartRateTask::Messages msg) {
BaseType_t xHigherPriorityTaskWoken = pdFALSE; BaseType_t xHigherPriorityTaskWoken = pdFALSE;
xQueueSendFromISR(messageQueue, &msg, &xHigherPriorityTaskWoken); xQueueSendFromISR(messageQueue, &msg, &xHigherPriorityTaskWoken);
if (xHigherPriorityTaskWoken == pdTRUE) { if (xHigherPriorityTaskWoken) {
/* Actual macro used here is port specific. */ /* Actual macro used here is port specific. */
// TODO : should I do something here? // TODO : should I do something here?
} }
@ -95,11 +111,12 @@ void HeartRateTask::PushMessage(HeartRateTask::Messages msg) {
void HeartRateTask::StartMeasurement() { void HeartRateTask::StartMeasurement() {
heartRateSensor.Enable(); heartRateSensor.Enable();
ppg.Reset(true);
vTaskDelay(100); vTaskDelay(100);
ppg.SetOffset(heartRateSensor.ReadHrs());
} }
void HeartRateTask::StopMeasurement() { void HeartRateTask::StopMeasurement() {
heartRateSensor.Disable(); heartRateSensor.Disable();
ppg.Reset(true);
vTaskDelay(100); vTaskDelay(100);
} }

3
src/libs/arduinoFFT-develop/.gitignore vendored Normal file
View file

@ -0,0 +1,3 @@
/.project
/sync.ffs_db
*.*bak

119
src/libs/arduinoFFT-develop/Examples/FFT_01/FFT_01.ino Normal file
View file

@ -0,0 +1,119 @@
/*
Example of use of the FFT libray
Copyright (C) 2014 Enrique Condes
Copyright (C) 2020 Bim Overbohm (header-only, template, speed improvements)
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
In this example, the Arduino simulates the sampling of a sinusoidal 1000 Hz
signal with an amplitude of 100, sampled at 5000 Hz. Samples are stored
inside the vReal array. The samples are windowed according to Hamming
function. The FFT is computed using the windowed samples. Then the magnitudes
of each of the frequencies that compose the signal are calculated. Finally,
the frequency with the highest peak is obtained, being that the main frequency
present in the signal.
*/
#include "arduinoFFT.h"
/*
These values can be changed in order to evaluate the functions
*/
const uint16_t samples = 64; //This value MUST ALWAYS be a power of 2
const double signalFrequency = 1000;
const double samplingFrequency = 5000;
const uint8_t amplitude = 100;
/*
These are the input and output vectors
Input vectors receive computed results from FFT
*/
double vReal[samples];
double vImag[samples];
/* Create FFT object */
ArduinoFFT<double> FFT = ArduinoFFT<double>(vReal, vImag, samples, samplingFrequency);
#define SCL_INDEX 0x00
#define SCL_TIME 0x01
#define SCL_FREQUENCY 0x02
#define SCL_PLOT 0x03
void setup()
{
Serial.begin(115200);
Serial.println("Ready");
}
void loop()
{
/* Build raw data */
double cycles = (((samples-1) * signalFrequency) / samplingFrequency); //Number of signal cycles that the sampling will read
for (uint16_t i = 0; i < samples; i++)
{
vReal[i] = int8_t((amplitude * (sin((i * (TWO_PI * cycles)) / samples))) / 2.0);/* Build data with positive and negative values*/
//vReal[i] = uint8_t((amplitude * (sin((i * (twoPi * cycles)) / samples) + 1.0)) / 2.0);/* Build data displaced on the Y axis to include only positive values*/
vImag[i] = 0.0; //Imaginary part must be zeroed in case of looping to avoid wrong calculations and overflows
}
/* Print the results of the simulated sampling according to time */
Serial.println("Data:");
PrintVector(vReal, samples, SCL_TIME);
FFT.windowing(FFTWindow::Hamming, FFTDirection::Forward); /* Weigh data */
Serial.println("Weighed data:");
PrintVector(vReal, samples, SCL_TIME);
FFT.compute(FFTDirection::Forward); /* Compute FFT */
Serial.println("Computed Real values:");
PrintVector(vReal, samples, SCL_INDEX);
Serial.println("Computed Imaginary values:");
PrintVector(vImag, samples, SCL_INDEX);
FFT.complexToMagnitude(); /* Compute magnitudes */
Serial.println("Computed magnitudes:");
PrintVector(vReal, (samples >> 1), SCL_FREQUENCY);
double x = FFT.majorPeak();
Serial.println(x, 6);
while(1); /* Run Once */
// delay(2000); /* Repeat after delay */
}
void PrintVector(double *vData, uint16_t bufferSize, uint8_t scaleType)
{
for (uint16_t i = 0; i < bufferSize; i++)
{
double abscissa;
/* Print abscissa value */
switch (scaleType)
{
case SCL_INDEX:
abscissa = (i * 1.0);
break;
case SCL_TIME:
abscissa = ((i * 1.0) / samplingFrequency);
break;
case SCL_FREQUENCY:
abscissa = ((i * 1.0 * samplingFrequency) / samples);
break;
}
Serial.print(abscissa, 6);
if(scaleType==SCL_FREQUENCY)
Serial.print("Hz");
Serial.print(" ");
Serial.println(vData[i], 4);
}
Serial.println();
}

125
src/libs/arduinoFFT-develop/Examples/FFT_02/FFT_02.ino Normal file
View file

@ -0,0 +1,125 @@
/*
Example of use of the FFT libray to compute FFT for several signals over a range of frequencies.
The exponent is calculated once before the excecution since it is a constant.
This saves resources during the excecution of the sketch and reduces the compiled size.
The sketch shows the time that the computing is taking.
Copyright (C) 2014 Enrique Condes
Copyright (C) 2020 Bim Overbohm (header-only, template, speed improvements)
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "arduinoFFT.h"
/*
These values can be changed in order to evaluate the functions
*/
const uint16_t samples = 64;
const double sampling = 40;
const uint8_t amplitude = 4;
const double startFrequency = 2;
const double stopFrequency = 16.4;
const double step_size = 0.1;
/*
These are the input and output vectors
Input vectors receive computed results from FFT
*/
double vReal[samples];
double vImag[samples];
/* Create FFT object */
ArduinoFFT<double> FFT = ArduinoFFT<double>(vReal, vImag, samples, sampling);
unsigned long startTime;
#define SCL_INDEX 0x00
#define SCL_TIME 0x01
#define SCL_FREQUENCY 0x02
#define SCL_PLOT 0x03
void setup()
{
Serial.begin(115200);
Serial.println("Ready");
}
void loop()
{
Serial.println("Frequency\tDetected\ttakes (ms)");
Serial.println("=======================================\n");
for(double frequency = startFrequency; frequency<=stopFrequency; frequency+=step_size)
{
/* Build raw data */
double cycles = (((samples-1) * frequency) / sampling);
for (uint16_t i = 0; i < samples; i++)
{
vReal[i] = int8_t((amplitude * (sin((i * (TWO_PI * cycles)) / samples))) / 2.0);
vImag[i] = 0; //Reset the imaginary values vector for each new frequency
}
/*Serial.println("Data:");
PrintVector(vReal, samples, SCL_TIME);*/
startTime=millis();
FFT.windowing(FFTWindow::Hamming, FFTDirection::Forward); /* Weigh data */
/*Serial.println("Weighed data:");
PrintVector(vReal, samples, SCL_TIME);*/
FFT.compute(FFTDirection::Forward); /* Compute FFT */
/*Serial.println("Computed Real values:");
PrintVector(vReal, samples, SCL_INDEX);
Serial.println("Computed Imaginary values:");
PrintVector(vImag, samples, SCL_INDEX);*/
FFT.complexToMagnitude(); /* Compute magnitudes */
/*Serial.println("Computed magnitudes:");
PrintVector(vReal, (samples >> 1), SCL_FREQUENCY);*/
double x = FFT.majorPeak();
Serial.print(frequency);
Serial.print(": \t\t");
Serial.print(x, 4);
Serial.print("\t\t");
Serial.print(millis()-startTime);
Serial.println(" ms");
// delay(2000); /* Repeat after delay */
}
while(1); /* Run Once */
}
void PrintVector(double *vData, uint16_t bufferSize, uint8_t scaleType)
{
for (uint16_t i = 0; i < bufferSize; i++)
{
double abscissa;
/* Print abscissa value */
switch (scaleType)
{
case SCL_INDEX:
abscissa = (i * 1.0);
break;
case SCL_TIME:
abscissa = ((i * 1.0) / sampling);
break;
case SCL_FREQUENCY:
abscissa = ((i * 1.0 * sampling) / samples);
break;
}
Serial.print(abscissa, 6);
if(scaleType==SCL_FREQUENCY)
Serial.print("Hz");
Serial.print(" ");
Serial.println(vData[i], 4);
}
Serial.println();
}

114
src/libs/arduinoFFT-develop/Examples/FFT_03/FFT_03.ino Normal file
View file

@ -0,0 +1,114 @@
/*
Example of use of the FFT libray to compute FFT for a signal sampled through the ADC.
Copyright (C) 2018 Enrique Condés and Ragnar Ranøyen Homb
Copyright (C) 2020 Bim Overbohm (header-only, template, speed improvements)
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "arduinoFFT.h"
/*
These values can be changed in order to evaluate the functions
*/
#define CHANNEL A0
const uint16_t samples = 64; //This value MUST ALWAYS be a power of 2
const double samplingFrequency = 100; //Hz, must be less than 10000 due to ADC
unsigned int sampling_period_us;
unsigned long microseconds;
/*
These are the input and output vectors
Input vectors receive computed results from FFT
*/
double vReal[samples];
double vImag[samples];
/* Create FFT object */
ArduinoFFT<double> FFT = ArduinoFFT<double>(vReal, vImag, samples, samplingFrequency);
#define SCL_INDEX 0x00
#define SCL_TIME 0x01
#define SCL_FREQUENCY 0x02
#define SCL_PLOT 0x03
void setup()
{
sampling_period_us = round(1000000*(1.0/samplingFrequency));
Serial.begin(115200);
Serial.println("Ready");
}
void loop()
{
/*SAMPLING*/
microseconds = micros();
for(int i=0; i<samples; i++)
{
vReal[i] = analogRead(CHANNEL);
vImag[i] = 0;
while(micros() - microseconds < sampling_period_us){
//empty loop
}
microseconds += sampling_period_us;
}
/* Print the results of the sampling according to time */
Serial.println("Data:");
PrintVector(vReal, samples, SCL_TIME);
FFT.windowing(FFTWindow::Hamming, FFTDirection::Forward); /* Weigh data */
Serial.println("Weighed data:");
PrintVector(vReal, samples, SCL_TIME);
FFT.compute(FFTDirection::Forward); /* Compute FFT */
Serial.println("Computed Real values:");
PrintVector(vReal, samples, SCL_INDEX);
Serial.println("Computed Imaginary values:");
PrintVector(vImag, samples, SCL_INDEX);
FFT.complexToMagnitude(); /* Compute magnitudes */
Serial.println("Computed magnitudes:");
PrintVector(vReal, (samples >> 1), SCL_FREQUENCY);
double x = FFT.majorPeak();
Serial.println(x, 6); //Print out what frequency is the most dominant.
while(1); /* Run Once */
// delay(2000); /* Repeat after delay */
}
void PrintVector(double *vData, uint16_t bufferSize, uint8_t scaleType)
{
for (uint16_t i = 0; i < bufferSize; i++)
{
double abscissa;
/* Print abscissa value */
switch (scaleType)
{
case SCL_INDEX:
abscissa = (i * 1.0);
break;
case SCL_TIME:
abscissa = ((i * 1.0) / samplingFrequency);
break;
case SCL_FREQUENCY:
abscissa = ((i * 1.0 * samplingFrequency) / samples);
break;
}
Serial.print(abscissa, 6);
if(scaleType==SCL_FREQUENCY)
Serial.print("Hz");
Serial.print(" ");
Serial.println(vData[i], 4);
}
Serial.println();
}

110
src/libs/arduinoFFT-develop/Examples/FFT_04/FFT_04.ino Normal file
View file

@ -0,0 +1,110 @@
/*
Example of use of the FFT libray
Copyright (C) 2018 Enrique Condes
Copyright (C) 2020 Bim Overbohm (header-only, template, speed improvements)
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
In this example, the Arduino simulates the sampling of a sinusoidal 1000 Hz
signal with an amplitude of 100, sampled at 5000 Hz. Samples are stored
inside the vReal array. The samples are windowed according to Hamming
function. The FFT is computed using the windowed samples. Then the magnitudes
of each of the frequencies that compose the signal are calculated. Finally,
the frequency spectrum magnitudes are printed. If you use the Arduino IDE
serial plotter, you will see a single spike corresponding to the 1000 Hz
frecuency.
*/
#include "arduinoFFT.h"
/*
These values can be changed in order to evaluate the functions
*/
const uint16_t samples = 64; //This value MUST ALWAYS be a power of 2
const double signalFrequency = 1000;
const double samplingFrequency = 5000;
const uint8_t amplitude = 100;
/*
These are the input and output vectors
Input vectors receive computed results from FFT
*/
double vReal[samples];
double vImag[samples];
ArduinoFFT<double> FFT = ArduinoFFT<double>(vReal, vImag, samples, samplingFrequency);
#define SCL_INDEX 0x00
#define SCL_TIME 0x01
#define SCL_FREQUENCY 0x02
#define SCL_PLOT 0x03
void setup()
{
Serial.begin(115200);
}
void loop()
{
/* Build raw data */
double cycles = (((samples-1) * signalFrequency) / samplingFrequency); //Number of signal cycles that the sampling will read
for (uint16_t i = 0; i < samples; i++)
{
vReal[i] = int8_t((amplitude * (sin((i * (TWO_PI * cycles)) / samples))) / 2.0);/* Build data with positive and negative values*/
//vReal[i] = uint8_t((amplitude * (sin((i * (twoPi * cycles)) / samples) + 1.0)) / 2.0);/* Build data displaced on the Y axis to include only positive values*/
vImag[i] = 0.0; //Imaginary part must be zeroed in case of looping to avoid wrong calculations and overflows
}
FFT.windowing(FFTWindow::Hamming, FFTDirection::Forward); /* Weigh data */
FFT.compute(FFTDirection::Forward); /* Compute FFT */
FFT.complexToMagnitude(); /* Compute magnitudes */
PrintVector(vReal, samples>>1, SCL_PLOT);
double x = FFT.majorPeak();
while(1); /* Run Once */
// delay(2000); /* Repeat after delay */
}
void PrintVector(double *vData, uint16_t bufferSize, uint8_t scaleType)
{
for (uint16_t i = 0; i < bufferSize; i++)
{
double abscissa;
/* Print abscissa value */
switch (scaleType)
{
case SCL_INDEX:
abscissa = (i * 1.0);
break;
case SCL_TIME:
abscissa = ((i * 1.0) / samplingFrequency);
break;
case SCL_FREQUENCY:
abscissa = ((i * 1.0 * samplingFrequency) / samples);
break;
}
if(scaleType!=SCL_PLOT)
{
Serial.print(abscissa, 6);
if(scaleType==SCL_FREQUENCY)
Serial.print("Hz");
Serial.print(" ");
}
Serial.println(vData[i], 4);
}
Serial.println();
}

124
src/libs/arduinoFFT-develop/Examples/FFT_05/FFT_05.ino Normal file
View file

@ -0,0 +1,124 @@
/*
Example of use of the FFT libray
Copyright (C) 2014 Enrique Condes
Copyright (C) 2020 Bim Overbohm (header-only, template, speed improvements)
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
In this example, the Arduino simulates the sampling of a sinusoidal 1000 Hz
signal with an amplitude of 100, sampled at 5000 Hz. Samples are stored
inside the vReal array. The samples are windowed according to Hamming
function. The FFT is computed using the windowed samples. Then the magnitudes
of each of the frequencies that compose the signal are calculated. Finally,
the frequency with the highest peak is obtained, being that the main frequency
present in the signal. This frequency is printed, along with the magnitude of
the peak.
*/
#include "arduinoFFT.h"
/*
These values can be changed in order to evaluate the functions
*/
const uint16_t samples = 64; //This value MUST ALWAYS be a power of 2
const double signalFrequency = 1000;
const double samplingFrequency = 5000;
const uint8_t amplitude = 100;
/*
These are the input and output vectors
Input vectors receive computed results from FFT
*/
double vReal[samples];
double vImag[samples];
/* Create FFT object */
ArduinoFFT<double> FFT = ArduinoFFT<double>(vReal, vImag, samples, samplingFrequency);
#define SCL_INDEX 0x00
#define SCL_TIME 0x01
#define SCL_FREQUENCY 0x02
#define SCL_PLOT 0x03
void setup()
{
Serial.begin(115200);
Serial.println("Ready");
}
void loop()
{
/* Build raw data */
double cycles = (((samples-1) * signalFrequency) / samplingFrequency); //Number of signal cycles that the sampling will read
for (uint16_t i = 0; i < samples; i++)
{
vReal[i] = int8_t((amplitude * (sin((i * (TWO_PI * cycles)) / samples))) / 2.0);/* Build data with positive and negative values*/
//vReal[i] = uint8_t((amplitude * (sin((i * (twoPi * cycles)) / samples) + 1.0)) / 2.0);/* Build data displaced on the Y axis to include only positive values*/
vImag[i] = 0.0; //Imaginary part must be zeroed in case of looping to avoid wrong calculations and overflows
}
/* Print the results of the simulated sampling according to time */
Serial.println("Data:");
PrintVector(vReal, samples, SCL_TIME);
FFT.windowing(FFTWindow::Hamming, FFTDirection::Forward); /* Weigh data */
Serial.println("Weighed data:");
PrintVector(vReal, samples, SCL_TIME);
FFT.compute(FFTDirection::Forward); /* Compute FFT */
Serial.println("Computed Real values:");
PrintVector(vReal, samples, SCL_INDEX);
Serial.println("Computed Imaginary values:");
PrintVector(vImag, samples, SCL_INDEX);
FFT.complexToMagnitude(); /* Compute magnitudes */
Serial.println("Computed magnitudes:");
PrintVector(vReal, (samples >> 1), SCL_FREQUENCY);
double x;
double v;
FFT.majorPeak(x, v);
Serial.print(x, 6);
Serial.print(", ");
Serial.println(v, 6);
while(1); /* Run Once */
// delay(2000); /* Repeat after delay */
}
void PrintVector(double *vData, uint16_t bufferSize, uint8_t scaleType)
{
for (uint16_t i = 0; i < bufferSize; i++)
{
double abscissa;
/* Print abscissa value */
switch (scaleType)
{
case SCL_INDEX:
abscissa = (i * 1.0);
break;
case SCL_TIME:
abscissa = ((i * 1.0) / samplingFrequency);
break;
case SCL_FREQUENCY:
abscissa = ((i * 1.0 * samplingFrequency) / samples);
break;
}
Serial.print(abscissa, 6);
if(scaleType==SCL_FREQUENCY)
Serial.print("Hz");
Serial.print(" ");
Serial.println(vData[i], 4);
}
Serial.println();
}

129
src/libs/arduinoFFT-develop/Examples/FFT_speedup/FFT_speedup.ino Normal file
View file

@ -0,0 +1,129 @@
/*
Example of use of the FFT libray to compute FFT for a signal sampled through the ADC
with speedup through different arduinoFFT options. Based on examples/FFT_03/FFT_03.ino
Copyright (C) 2020 Bim Overbohm (header-only, template, speed improvements)
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
// There are two speedup options for some of the FFT code:
// Define this to use reciprocal multiplication for division and some more speedups that might decrease precision
//#define FFT_SPEED_OVER_PRECISION
// Define this to use a low-precision square root approximation instead of the regular sqrt() call
// This might only work for specific use cases, but is significantly faster. Only works for ArduinoFFT<float>.
//#define FFT_SQRT_APPROXIMATION
#include "arduinoFFT.h"
/*
These values can be changed in order to evaluate the functions
*/
#define CHANNEL A0
const uint16_t samples = 64; //This value MUST ALWAYS be a power of 2
const float samplingFrequency = 100; //Hz, must be less than 10000 due to ADC
unsigned int sampling_period_us;
unsigned long microseconds;
/*
These are the input and output vectors
Input vectors receive computed results from FFT
*/
float vReal[samples];
float vImag[samples];
/*
Allocate space for FFT window weighing factors, so they are calculated only the first time windowing() is called.
If you don't do this, a lot of calculations are necessary, depending on the window function.
*/
float weighingFactors[samples];
/* Create FFT object with weighing factor storage */
ArduinoFFT<float> FFT = ArduinoFFT<float>(vReal, vImag, samples, samplingFrequency, weighingFactors);
#define SCL_INDEX 0x00
#define SCL_TIME 0x01
#define SCL_FREQUENCY 0x02
#define SCL_PLOT 0x03
void setup()
{
sampling_period_us = round(1000000*(1.0/samplingFrequency));
Serial.begin(115200);
Serial.println("Ready");
}
void loop()
{
/*SAMPLING*/
microseconds = micros();
for(int i=0; i<samples; i++)
{
vReal[i] = analogRead(CHANNEL);
vImag[i] = 0;
while(micros() - microseconds < sampling_period_us){
//empty loop
}
microseconds += sampling_period_us;
}
/* Print the results of the sampling according to time */
Serial.println("Data:");
PrintVector(vReal, samples, SCL_TIME);
FFT.windowing(FFTWindow::Hamming, FFTDirection::Forward); /* Weigh data */
Serial.println("Weighed data:");
PrintVector(vReal, samples, SCL_TIME);
FFT.compute(FFTDirection::Forward); /* Compute FFT */
Serial.println("Computed Real values:");
PrintVector(vReal, samples, SCL_INDEX);
Serial.println("Computed Imaginary values:");
PrintVector(vImag, samples, SCL_INDEX);
FFT.complexToMagnitude(); /* Compute magnitudes */
Serial.println("Computed magnitudes:");
PrintVector(vReal, (samples >> 1), SCL_FREQUENCY);
float x = FFT.majorPeak();
Serial.println(x, 6); //Print out what frequency is the most dominant.
while(1); /* Run Once */
// delay(2000); /* Repeat after delay */
}
void PrintVector(float *vData, uint16_t bufferSize, uint8_t scaleType)
{
for (uint16_t i = 0; i < bufferSize; i++)
{
float abscissa;
/* Print abscissa value */
switch (scaleType)
{
case SCL_INDEX:
abscissa = (i * 1.0);
break;
case SCL_TIME:
abscissa = ((i * 1.0) / samplingFrequency);
break;
case SCL_FREQUENCY:
abscissa = ((i * 1.0 * samplingFrequency) / samples);
break;
}
Serial.print(abscissa, 6);
if(scaleType==SCL_FREQUENCY)
Serial.print("Hz");
Serial.print(" ");
Serial.println(vData[i], 4);
}
Serial.println();
}

674
src/libs/arduinoFFT-develop/LICENSE Normal file
View file

@ -0,0 +1,674 @@
GNU GENERAL PUBLIC LICENSE
Version 3, 29 June 2007
Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The GNU General Public License is a free, copyleft license for
software and other kinds of works.
The licenses for most software and other practical works are designed
to take away your freedom to share and change the works. By contrast,
the GNU General Public License is intended to guarantee your freedom to
share and change all versions of a program--to make sure it remains free
software for all its users. We, the Free Software Foundation, use the
GNU General Public License for most of our software; it applies also to
any other work released this way by its authors. You can apply it to
your programs, too.
When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
them if you wish), that you receive source code or can get it if you
want it, that you can change the software or use pieces of it in new
free programs, and that you know you can do these things.
To protect your rights, we need to prevent others from denying you
these rights or asking you to surrender the rights. Therefore, you have
certain responsibilities if you distribute copies of the software, or if
you modify it: responsibilities to respect the freedom of others.
For example, if you distribute copies of such a program, whether
gratis or for a fee, you must pass on to the recipients the same
freedoms that you received. You must make sure that they, too, receive
or can get the source code. And you must show them these terms so they
know their rights.
Developers that use the GNU GPL protect your rights with two steps:
(1) assert copyright on the software, and (2) offer you this License
giving you legal permission to copy, distribute and/or modify it.
For the developers' and authors' protection, the GPL clearly explains
that there is no warranty for this free software. For both users' and
authors' sake, the GPL requires that modified versions be marked as
changed, so that their problems will not be attributed erroneously to
authors of previous versions.
Some devices are designed to deny users access to install or run
modified versions of the software inside them, although the manufacturer
can do so. This is fundamentally incompatible with the aim of
protecting users' freedom to change the software. The systematic
pattern of such abuse occurs in the area of products for individuals to
use, which is precisely where it is most unacceptable. Therefore, we
have designed this version of the GPL to prohibit the practice for those
products. If such problems arise substantially in other domains, we
stand ready to extend this provision to those domains in future versions
of the GPL, as needed to protect the freedom of users.
Finally, every program is threatened constantly by software patents.
States should not allow patents to restrict development and use of
software on general-purpose computers, but in those that do, we wish to
avoid the special danger that patents applied to a free program could
make it effectively proprietary. To prevent this, the GPL assures that
patents cannot be used to render the program non-free.
The precise terms and conditions for copying, distribution and
modification follow.
TERMS AND CONDITIONS
0. Definitions.
"This License" refers to version 3 of the GNU General Public License.
"Copyright" also means copyright-like laws that apply to other kinds of
works, such as semiconductor masks.
"The Program" refers to any copyrightable work licensed under this
License. Each licensee is addressed as "you". "Licensees" and
"recipients" may be individuals or organizations.
To "modify" a work means to copy from or adapt all or part of the work
in a fashion requiring copyright permission, other than the making of an
exact copy. The resulting work is called a "modified version" of the
earlier work or a work "based on" the earlier work.
A "covered work" means either the unmodified Program or a work based
on the Program.
To "propagate" a work means to do anything with it that, without
permission, would make you directly or secondarily liable for
infringement under applicable copyright law, except executing it on a
computer or modifying a private copy. Propagation includes copying,
distribution (with or without modification), making available to the
public, and in some countries other activities as well.
To "convey" a work means any kind of propagation that enables other
parties to make or receive copies. Mere interaction with a user through
a computer network, with no transfer of a copy, is not conveying.
An interactive user interface displays "Appropriate Legal Notices"
to the extent that it includes a convenient and prominently visible
feature that (1) displays an appropriate copyright notice, and (2)
tells the user that there is no warranty for the work (except to the
extent that warranties are provided), that licensees may convey the
work under this License, and how to view a copy of this License. If
the interface presents a list of user commands or options, such as a
menu, a prominent item in the list meets this criterion.
1. Source Code.
The "source code" for a work means the preferred form of the work
for making modifications to it. "Object code" means any non-source
form of a work.
A "Standard Interface" means an interface that either is an official
standard defined by a recognized standards body, or, in the case of
interfaces specified for a particular programming language, one that
is widely used among developers working in that language.
The "System Libraries" of an executable work include anything, other
than the work as a whole, that (a) is included in the normal form of
packaging a Major Component, but which is not part of that Major
Component, and (b) serves only to enable use of the work with that
Major Component, or to implement a Standard Interface for which an
implementation is available to the public in source code form. A
"Major Component", in this context, means a major essential component
(kernel, window system, and so on) of the specific operating system
(if any) on which the executable work runs, or a compiler used to
produce the work, or an object code interpreter used to run it.
The "Corresponding Source" for a work in object code form means all
the source code needed to generate, install, and (for an executable
work) run the object code and to modify the work, including scripts to
control those activities. However, it does not include the work's
System Libraries, or general-purpose tools or generally available free
programs which are used unmodified in performing those activities but
which are not part of the work. For example, Corresponding Source
includes interface definition files associated with source files for
the work, and the source code for shared libraries and dynamically
linked subprograms that the work is specifically designed to require,
such as by intimate data communication or control flow between those
subprograms and other parts of the work.
The Corresponding Source need not include anything that users
can regenerate automatically from other parts of the Corresponding
Source.
The Corresponding Source for a work in source code form is that
same work.
2. Basic Permissions.
All rights granted under this License are granted for the term of
copyright on the Program, and are irrevocable provided the stated
conditions are met. This License explicitly affirms your unlimited
permission to run the unmodified Program. The output from running a
covered work is covered by this License only if the output, given its
content, constitutes a covered work. This License acknowledges your
rights of fair use or other equivalent, as provided by copyright law.
You may make, run and propagate covered works that you do not
convey, without conditions so long as your license otherwise remains
in force. You may convey covered works to others for the sole purpose
of having them make modifications exclusively for you, or provide you
with facilities for running those works, provided that you comply with
the terms of this License in conveying all material for which you do
not control copyright. Those thus making or running the covered works
for you must do so exclusively on your behalf, under your direction
and control, on terms that prohibit them from making any copies of
your copyrighted material outside their relationship with you.
Conveying under any other circumstances is permitted solely under
the conditions stated below. Sublicensing is not allowed; section 10
makes it unnecessary.
3. Protecting Users' Legal Rights From Anti-Circumvention Law.
No covered work shall be deemed part of an effective technological
measure under any applicable law fulfilling obligations under article
11 of the WIPO copyright treaty adopted on 20 December 1996, or
similar laws prohibiting or restricting circumvention of such
measures.
When you convey a covered work, you waive any legal power to forbid
circumvention of technological measures to the extent such circumvention
is effected by exercising rights under this License with respect to
the covered work, and you disclaim any intention to limit operation or
modification of the work as a means of enforcing, against the work's
users, your or third parties' legal rights to forbid circumvention of
technological measures.
4. Conveying Verbatim Copies.
You may convey verbatim copies of the Program's source code as you
receive it, in any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice;
keep intact all notices stating that this License and any
non-permissive terms added in accord with section 7 apply to the code;
keep intact all notices of the absence of any warranty; and give all
recipients a copy of this License along with the Program.
You may charge any price or no price for each copy that you convey,
and you may offer support or warranty protection for a fee.
5. Conveying Modified Source Versions.
You may convey a work based on the Program, or the modifications to
produce it from the Program, in the form of source code under the
terms of section 4, provided that you also meet all of these conditions:
a) The work must carry prominent notices stating that you modified
it, and giving a relevant date.
b) The work must carry prominent notices stating that it is
released under this License and any conditions added under section
7. This requirement modifies the requirement in section 4 to
"keep intact all notices".
c) You must license the entire work, as a whole, under this
License to anyone who comes into possession of a copy. This
License will therefore apply, along with any applicable section 7
additional terms, to the whole of the work, and all its parts,
regardless of how they are packaged. This License gives no
permission to license the work in any other way, but it does not
invalidate such permission if you have separately received it.
d) If the work has interactive user interfaces, each must display
Appropriate Legal Notices; however, if the Program has interactive
interfaces that do not display Appropriate Legal Notices, your
work need not make them do so.
A compilation of a covered work with other separate and independent
works, which are not by their nature extensions of the covered work,
and which are not combined with it such as to form a larger program,
in or on a volume of a storage or distribution medium, is called an
"aggregate" if the compilation and its resulting copyright are not
used to limit the access or legal rights of the compilation's users
beyond what the individual works permit. Inclusion of a covered work
in an aggregate does not cause this License to apply to the other
parts of the aggregate.
6. Conveying Non-Source Forms.
You may convey a covered work in object code form under the terms
of sections 4 and 5, provided that you also convey the
machine-readable Corresponding Source under the terms of this License,
in one of these ways:
a) Convey the object code in, or embodied in, a physical product
(including a physical distribution medium), accompanied by the
Corresponding Source fixed on a durable physical medium
customarily used for software interchange.
b) Convey the object code in, or embodied in, a physical product
(including a physical distribution medium), accompanied by a
written offer, valid for at least three years and valid for as
long as you offer spare parts or customer support for that product
model, to give anyone who possesses the object code either (1) a
copy of the Corresponding Source for all the software in the
product that is covered by this License, on a durable physical
medium customarily used for software interchange, for a price no
more than your reasonable cost of physically performing this
conveying of source, or (2) access to copy the
Corresponding Source from a network server at no charge.
c) Convey individual copies of the object code with a copy of the
written offer to provide the Corresponding Source. This
alternative is allowed only occasionally and noncommercially, and
only if you received the object code with such an offer, in accord
with subsection 6b.
d) Convey the object code by offering access from a designated
place (gratis or for a charge), and offer equivalent access to the
Corresponding Source in the same way through the same place at no
further charge. You need not require recipients to copy the
Corresponding Source along with the object code. If the place to
copy the object code is a network server, the Corresponding Source
may be on a different server (operated by you or a third party)
that supports equivalent copying facilities, provided you maintain
clear directions next to the object code saying where to find the
Corresponding Source. Regardless of what server hosts the
Corresponding Source, you remain obligated to ensure that it is
available for as long as needed to satisfy these requirements.
e) Convey the object code using peer-to-peer transmission, provided
you inform other peers where the object code and Corresponding
Source of the work are being offered to the general public at no
charge under subsection 6d.
A separable portion of the object code, whose source code is excluded
from the Corresponding Source as a System Library, need not be
included in conveying the object code work.
A "User Product" is either (1) a "consumer product", which means any
tangible personal property which is normally used for personal, family,
or household purposes, or (2) anything designed or sold for incorporation
into a dwelling. In determining whether a product is a consumer product,
doubtful cases shall be resolved in favor of coverage. For a particular
product received by a particular user, "normally used" refers to a
typical or common use of that class of product, regardless of the status
of the particular user or of the way in which the particular user
actually uses, or expects or is expected to use, the product. A product
is a consumer product regardless of whether the product has substantial
commercial, industrial or non-consumer uses, unless such uses represent
the only significant mode of use of the product.
"Installation Information" for a User Product means any methods,
procedures, authorization keys, or other information required to install
and execute modified versions of a covered work in that User Product from
a modified version of its Corresponding Source. The information must
suffice to ensure that the continued functioning of the modified object
code is in no case prevented or interfered with solely because
modification has been made.
If you convey an object code work under this section in, or with, or
specifically for use in, a User Product, and the conveying occurs as
part of a transaction in which the right of possession and use of the
User Product is transferred to the recipient in perpetuity or for a
fixed term (regardless of how the transaction is characterized), the
Corresponding Source conveyed under this section must be accompanied
by the Installation Information. But this requirement does not apply
if neither you nor any third party retains the ability to install
modified object code on the User Product (for example, the work has
been installed in ROM).
The requirement to provide Installation Information does not include a
requirement to continue to provide support service, warranty, or updates
for a work that has been modified or installed by the recipient, or for
the User Product in which it has been modified or installed. Access to a
network may be denied when the modification itself materially and
adversely affects the operation of the network or violates the rules and
protocols for communication across the network.
Corresponding Source conveyed, and Installation Information provided,
in accord with this section must be in a format that is publicly
documented (and with an implementation available to the public in
source code form), and must require no special password or key for
unpacking, reading or copying.
7. Additional Terms.
"Additional permissions" are terms that supplement the terms of this
License by making exceptions from one or more of its conditions.
Additional permissions that are applicable to the entire Program shall
be treated as though they were included in this License, to the extent
that they are valid under applicable law. If additional permissions
apply only to part of the Program, that part may be used separately
under those permissions, but the entire Program remains governed by
this License without regard to the additional permissions.
When you convey a copy of a covered work, you may at your option
remove any additional permissions from that copy, or from any part of
it. (Additional permissions may be written to require their own
removal in certain cases when you modify the work.) You may place
additional permissions on material, added by you to a covered work,
for which you have or can give appropriate copyright permission.
Notwithstanding any other provision of this License, for material you
add to a covered work, you may (if authorized by the copyright holders of
that material) supplement the terms of this License with terms:
a) Disclaiming warranty or limiting liability differently from the
terms of sections 15 and 16 of this License; or
b) Requiring preservation of specified reasonable legal notices or
author attributions in that material or in the Appropriate Legal
Notices displayed by works containing it; or
c) Prohibiting misrepresentation of the origin of that material, or
requiring that modified versions of such material be marked in
reasonable ways as different from the original version; or
d) Limiting the use for publicity purposes of names of licensors or
authors of the material; or
e) Declining to grant rights under trademark law for use of some
trade names, trademarks, or service marks; or
f) Requiring indemnification of licensors and authors of that
material by anyone who conveys the material (or modified versions of
it) with contractual assumptions of liability to the recipient, for
any liability that these contractual assumptions directly impose on
those licensors and authors.
All other non-permissive additional terms are considered "further
restrictions" within the meaning of section 10. If the Program as you
received it, or any part of it, contains a notice stating that it is
governed by this License along with a term that is a further
restriction, you may remove that term. If a license document contains
a further restriction but permits relicensing or conveying under this
License, you may add to a covered work material governed by the terms
of that license document, provided that the further restriction does
not survive such relicensing or conveying.
If you add terms to a covered work in accord with this section, you
must place, in the relevant source files, a statement of the
additional terms that apply to those files, or a notice indicating
where to find the applicable terms.
Additional terms, permissive or non-permissive, may be stated in the
form of a separately written license, or stated as exceptions;
the above requirements apply either way.
8. Termination.
You may not propagate or modify a covered work except as expressly
provided under this License. Any attempt otherwise to propagate or
modify it is void, and will automatically terminate your rights under
this License (including any patent licenses granted under the third
paragraph of section 11).
However, if you cease all violation of this License, then your
license from a particular copyright holder is reinstated (a)
provisionally, unless and until the copyright holder explicitly and
finally terminates your license, and (b) permanently, if the copyright
holder fails to notify you of the violation by some reasonable means
prior to 60 days after the cessation.
Moreover, your license from a particular copyright holder is
reinstated permanently if the copyright holder notifies you of the
violation by some reasonable means, this is the first time you have
received notice of violation of this License (for any work) from that
copyright holder, and you cure the violation prior to 30 days after
your receipt of the notice.
Termination of your rights under this section does not terminate the
licenses of parties who have received copies or rights from you under
this License. If your rights have been terminated and not permanently
reinstated, you do not qualify to receive new licenses for the same
material under section 10.
9. Acceptance Not Required for Having Copies.
You are not required to accept this License in order to receive or
run a copy of the Program. Ancillary propagation of a covered work
occurring solely as a consequence of using peer-to-peer transmission
to receive a copy likewise does not require acceptance. However,
nothing other than this License grants you permission to propagate or
modify any covered work. These actions infringe copyright if you do
not accept this License. Therefore, by modifying or propagating a
covered work, you indicate your acceptance of this License to do so.
10. Automatic Licensing of Downstream Recipients.
Each time you convey a covered work, the recipient automatically
receives a license from the original licensors, to run, modify and
propagate that work, subject to this License. You are not responsible
for enforcing compliance by third parties with this License.
An "entity transaction" is a transaction transferring control of an
organization, or substantially all assets of one, or subdividing an
organization, or merging organizations. If propagation of a covered
work results from an entity transaction, each party to that
transaction who receives a copy of the work also receives whatever
licenses to the work the party's predecessor in interest had or could
give under the previous paragraph, plus a right to possession of the
Corresponding Source of the work from the predecessor in interest, if
the predecessor has it or can get it with reasonable efforts.
You may not impose any further restrictions on the exercise of the
rights granted or affirmed under this License. For example, you may
not impose a license fee, royalty, or other charge for exercise of
rights granted under this License, and you may not initiate litigation
(including a cross-claim or counterclaim in a lawsuit) alleging that
any patent claim is infringed by making, using, selling, offering for
sale, or importing the Program or any portion of it.
11. Patents.
A "contributor" is a copyright holder who authorizes use under this
License of the Program or a work on which the Program is based. The
work thus licensed is called the contributor's "contributor version".
A contributor's "essential patent claims" are all patent claims
owned or controlled by the contributor, whether already acquired or
hereafter acquired, that would be infringed by some manner, permitted
by this License, of making, using, or selling its contributor version,
but do not include claims that would be infringed only as a
consequence of further modification of the contributor version. For
purposes of this definition, "control" includes the right to grant
patent sublicenses in a manner consistent with the requirements of
this License.
Each contributor grants you a non-exclusive, worldwide, royalty-free
patent license under the contributor's essential patent claims, to
make, use, sell, offer for sale, import and otherwise run, modify and
propagate the contents of its contributor version.
In the following three paragraphs, a "patent license" is any express
agreement or commitment, however denominated, not to enforce a patent
(such as an express permission to practice a patent or covenant not to
sue for patent infringement). To "grant" such a patent license to a
party means to make such an agreement or commitment not to enforce a
patent against the party.
If you convey a covered work, knowingly relying on a patent license,
and the Corresponding Source of the work is not available for anyone
to copy, free of charge and under the terms of this License, through a
publicly available network server or other readily accessible means,
then you must either (1) cause the Corresponding Source to be so
available, or (2) arrange to deprive yourself of the benefit of the
patent license for this particular work, or (3) arrange, in a manner
consistent with the requirements of this License, to extend the patent
license to downstream recipients. "Knowingly relying" means you have
actual knowledge that, but for the patent license, your conveying the
covered work in a country, or your recipient's use of the covered work
in a country, would infringe one or more identifiable patents in that
country that you have reason to believe are valid.
If, pursuant to or in connection with a single transaction or
arrangement, you convey, or propagate by procuring conveyance of, a
covered work, and grant a patent license to some of the parties
receiving the covered work authorizing them to use, propagate, modify
or convey a specific copy of the covered work, then the patent license
you grant is automatically extended to all recipients of the covered
work and works based on it.
A patent license is "discriminatory" if it does not include within
the scope of its coverage, prohibits the exercise of, or is
conditioned on the non-exercise of one or more of the rights that are
specifically granted under this License. You may not convey a covered
work if you are a party to an arrangement with a third party that is
in the business of distributing software, under which you make payment
to the third party based on the extent of your activity of conveying
the work, and under which the third party grants, to any of the
parties who would receive the covered work from you, a discriminatory
patent license (a) in connection with copies of the covered work
conveyed by you (or copies made from those copies), or (b) primarily
for and in connection with specific products or compilations that
contain the covered work, unless you entered into that arrangement,
or that patent license was granted, prior to 28 March 2007.
Nothing in this License shall be construed as excluding or limiting
any implied license or other defenses to infringement that may
otherwise be available to you under applicable patent law.
12. No Surrender of Others' Freedom.
If conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot convey a
covered work so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you may
not convey it at all. For example, if you agree to terms that obligate you
to collect a royalty for further conveying from those to whom you convey
the Program, the only way you could satisfy both those terms and this
License would be to refrain entirely from conveying the Program.
13. Use with the GNU Affero General Public License.
Notwithstanding any other provision of this License, you have
permission to link or combine any covered work with a work licensed
under version 3 of the GNU Affero General Public License into a single
combined work, and to convey the resulting work. The terms of this
License will continue to apply to the part which is the covered work,
but the special requirements of the GNU Affero General Public License,
section 13, concerning interaction through a network will apply to the
combination as such.
14. Revised Versions of this License.
The Free Software Foundation may publish revised and/or new versions of
the GNU General Public License from time to time. Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.
Each version is given a distinguishing version number. If the
Program specifies that a certain numbered version of the GNU General
Public License "or any later version" applies to it, you have the
option of following the terms and conditions either of that numbered
version or of any later version published by the Free Software
Foundation. If the Program does not specify a version number of the
GNU General Public License, you may choose any version ever published
by the Free Software Foundation.
If the Program specifies that a proxy can decide which future
versions of the GNU General Public License can be used, that proxy's
public statement of acceptance of a version permanently authorizes you
to choose that version for the Program.
Later license versions may give you additional or different
permissions. However, no additional obligations are imposed on any
author or copyright holder as a result of your choosing to follow a
later version.
15. Disclaimer of Warranty.
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16. Limitation of Liability.
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
17. Interpretation of Sections 15 and 16.
If the disclaimer of warranty and limitation of liability provided
above cannot be given local legal effect according to their terms,
reviewing courts shall apply local law that most closely approximates
an absolute waiver of all civil liability in connection with the
Program, unless a warranty or assumption of liability accompanies a
copy of the Program in return for a fee.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest
to attach them to the start of each source file to most effectively
state the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.
{one line to give the program's name and a brief idea of what it does.}
Copyright (C) {year} {name of author}
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
Also add information on how to contact you by electronic and paper mail.
If the program does terminal interaction, make it output a short
notice like this when it starts in an interactive mode:
{project} Copyright (C) {year} {fullname}
This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
This is free software, and you are welcome to redistribute it
under certain conditions; type `show c' for details.
The hypothetical commands `show w' and `show c' should show the appropriate
parts of the General Public License. Of course, your program's commands
might be different; for a GUI interface, you would use an "about box".
You should also get your employer (if you work as a programmer) or school,
if any, to sign a "copyright disclaimer" for the program, if necessary.
For more information on this, and how to apply and follow the GNU GPL, see
<http://www.gnu.org/licenses/>.
The GNU General Public License does not permit incorporating your program
into proprietary programs. If your program is a subroutine library, you
may consider it more useful to permit linking proprietary applications with
the library. If this is what you want to do, use the GNU Lesser General
Public License instead of this License. But first, please read
<http://www.gnu.org/philosophy/why-not-lgpl.html>.

129
src/libs/arduinoFFT-develop/README.md Normal file
View file

@ -0,0 +1,129 @@
arduinoFFT
==========
# Fast Fourier Transform for Arduino
This is a fork from https://code.google.com/p/makefurt/ which has been abandoned since 2011.
~~This is a C++ library for Arduino for computing FFT.~~ Now it works both on Arduino and C projects. This is version 2.0 of the library, which has a different [API](#api). See here [how to migrate from 1.x to 2.x](#migrating-from-1x-to-2x).
Tested on Arduino 1.6.11 and 1.8.10.
## Installation on Arduino
Use the Arduino Library Manager to install and keep it updated. Just look for arduinoFFT. Only for Arduino 1.5+
## Manual installation on Arduino
To install this library, just place this entire folder as a subfolder in your Arduino installation. When installed, this library should look like:
`Arduino\libraries\arduinoFTT` (this library's folder)
`Arduino\libraries\arduinoFTT\src\arduinoFTT.h` (the library header file. include this in your project)
`Arduino\libraries\arduinoFTT\keywords.txt` (the syntax coloring file)
`Arduino\libraries\arduinoFTT\Examples` (the examples in the "open" menu)
`Arduino\libraries\arduinoFTT\LICENSE` (GPL license file)
`Arduino\libraries\arduinoFTT\README.md` (this file)
## Building on Arduino
After this library is installed, you just have to start the Arduino application.
You may see a few warning messages as it's built.
To use this library in a sketch, go to the Sketch | Import Library menu and
select arduinoFTT. This will add a corresponding line to the top of your sketch:
`#include <arduinoFTT.h>`
## API
* ```ArduinoFFT(T *vReal, T *vImag, uint_fast16_t samples, T samplingFrequency, T * weighingFactors = nullptr);```
Constructor.
The type `T` can be `float` or `double`. `vReal` and `vImag` are pointers to arrays of real and imaginary data and have to be allocated outside of ArduinoFFT. `samples` is the number of samples in `vReal` and `vImag` and `weighingFactors` (if specified). `samplingFrequency` is the sample frequency of the data. `weighingFactors` can optionally be specified to cache weighing factors for the windowing function. This speeds up repeated calls to **windowing()** significantly. You can deallocate `vReal` and `vImag` after you are done using the library, or only use specific library functions that only need one of those arrays.
```C++
const uint32_t nrOfSamples = 1024;
auto real = new float[nrOfSamples];
auto imag = new float[nrOfSamples];
auto fft = ArduinoFFT<float>(real, imag, nrOfSamples, 10000);
// ... fill real + imag and use it ...
fft.compute();
fft.complexToMagnitude();
delete [] imag;
// ... continue using real and only functions that use real ...
auto peak = fft.majorPeak();
```
* ```~ArduinoFFT()```
Destructor.
* ```void complexToMagnitude() const;```
Convert complex values to their magnitude and store in vReal. Uses vReal and vImag.
* ```void compute(FFTDirection dir) const;```
Calcuates the Fast Fourier Transform. Uses vReal and vImag.
* ```void dcRemoval() const;```
Removes the DC component from the sample data. Uses vReal.
* ```T majorPeak() const;```
Returns the frequency of the biggest spike in the analyzed signal. Uses vReal.
* ```void majorPeak(T &frequency, T &value) const;```
Returns the frequency and the value of the biggest spike in the analyzed signal. Uses vReal.
* ```uint8_t revision() const;```
Returns the library revision.
* ```void setArrays(T *vReal, T *vImag);```
Replace the data array pointers.
* ```void windowing(FFTWindow windowType, FFTDirection dir, bool withCompensation = false);```
Performs a windowing function on the values array. Uses vReal. The possible windowing options are:
* Rectangle
* Hamming
* Hann
* Triangle
* Nuttall
* Blackman
* Blackman_Nuttall
* Blackman_Harris
* Flat_top
* Welch
If `withCompensation` == true, the following compensation factors are used:
* Rectangle: 1.0 * 2.0
* Hamming: 1.8549343278 * 2.0
* Hann: 1.8554726898 * 2.0
* Triangle: 2.0039186079 * 2.0
* Nuttall: 2.8163172034 * 2.0
* Blackman: 2.3673474360 * 2.0
* Blackman Nuttall: 2.7557840395 * 2.0
* Blackman Harris: 2.7929062517 * 2.0
* Flat top: 3.5659039231 * 2.0
* Welch: 1.5029392863 * 2.0
## Special flags
You can define these before including arduinoFFT.h:
* #define FFT_SPEED_OVER_PRECISION
Define this to use reciprocal multiplication for division and some more speedups that might decrease precision.
* #define FFT_SQRT_APPROXIMATION
Define this to use a low-precision square root approximation instead of the regular sqrt() call. This might only work for specific use cases, but is significantly faster. Only works if `T == float`.
See the `FFT_speedup.ino` example in `Examples/FFT_speedup/FFT_speedup.ino`.
# Migrating from 1.x to 2.x
* The function signatures where you could pass in pointers were deprecated and have been removed. Pass in pointers to your real / imaginary array in the ArduinoFFT() constructor. If you have the need to replace those pointers during usage of the library (e.g. to free memory) you can do the following:
```C++
const uint32_t nrOfSamples = 1024;
auto real = new float[nrOfSamples];
auto imag = new float[nrOfSamples];
auto fft = ArduinoFFT<float>(real, imag, nrOfSamples, 10000);
// ... fill real + imag and use it ...
fft.compute();
fft.complexToMagnitude();
delete [] real;
// ... replace vReal in library with imag ...
fft.setArrays(imag, nullptr);
// ... keep doing whatever ...
```
* All function names are camelCase case now (start with lower-case character), e.g. "windowing()" instead of "Windowing()".
## TODO
* Ratio table for windowing function.
* Document windowing functions advantages and disadvantages.
* Optimize usage and arguments.
* Add new windowing functions.
* ~~Spectrum table?~~

40
src/libs/arduinoFFT-develop/changeLog.txt Normal file
View file

@ -0,0 +1,40 @@
02/22/20 v1.9.2
Fix compilation on AVR systems.
02/22/20 v1.9.1
Add setArrays() function because of issue #32.
Add API migration info to README and improve README.
Use better sqrtf() approximation.
02/19/20 v1.9.0
Remove deprecated API. Consistent renaming of functions to lowercase.
Make template to be able to use float or double type (float brings a ~70% speed increase on ESP32).
Add option to provide cache for window function weighing factors (~50% speed increase on ESP32).
Add some #defines to enable math approximisations to further speed up code (~40% speed increase on ESP32).
01/27/20 v1.5.5
Lookup table for constants c1 and c2 used during FFT comupting. This increases the FFT computing speed in around 5%.
02/10/18 v1.4
Transition version. Minor optimization to functions. New API. Deprecation of old functions.
12/06/18 v1.3
Add support for mbed development boards.
09/04/17 v1.2.3
Finally solves the issue of Arduino IDE not correctly detecting and highlighting the keywords.
09/03/17 v1.2.2
Solves a format issue in keywords.txt that prevented keywords from being detected.
08/28/17 v1.2.1
Fix to issues 6 and 7. Not cleaning the imaginary vector after each cycle leaded to erroneous calculations and could cause buffer overflows.
08/04/17 v1.2
Fix to bug preventing the number of samples to be greater than 128. New logical limit is 32768 samples but it is bound to the RAM on the chip.
05/12/17 v1.1
Fix issue that prevented installation through the Arduino Library Manager interface.
05/11/17 v1.0
Initial commit to Arduino Library Manager.

41
src/libs/arduinoFFT-develop/keywords.txt Normal file
View file

@ -0,0 +1,41 @@
#######################################
# Syntax Coloring Map For arduinoFFT
#######################################
#######################################
# Datatypes (KEYWORD1)
#######################################
ArduinoFFT KEYWORD1
FFTDirection KEYWORD1
FFTWindow KEYWORD1
#######################################
# Methods and Functions (KEYWORD2)
#######################################
complexToMagnitude KEYWORD2
compute KEYWORD2
dcRemoval KEYWORD2
windowing KEYWORD2
exponent KEYWORD2
revision KEYWORD2
majorPeak KEYWORD2
setArrays KEYWORD2
#######################################
# Constants (LITERAL1)
#######################################
Forward LITERAL1
Reverse LITERAL1
Rectangle LITERAL1
Hamming LITERAL1
Hann LITERAL1
Triangle LITERAL1
Nuttall LITERAL1
Blackman LITERAL1
Blackman_Nuttall LITERAL1
Blackman_Harris LITERAL1
Flat_top LITERAL1
Welch LITERAL1

31
src/libs/arduinoFFT-develop/library.json Normal file
View file

@ -0,0 +1,31 @@
{
"name": "arduinoFFT",
"keywords": "FFT, Fourier, FDT, frequency",
"description": "A library for implementing floating point Fast Fourier Transform calculations.",
"repository":
{
"type": "git",
"url": "https://github.com/kosme/arduinoFFT.git"
},
"authors":
[
{
"name": "Enrique Condes",
"email": "enrique@shapeoko.com",
"maintainer": true
},
{
"name": "Didier Longueville",
"url": "http://www.arduinoos.com/",
"email": "contact@arduinoos.com"
},
{
"name": "Bim Overbohm",
"url": "https://github.com/HorstBaerbel",
"email": "bim.overbohm@googlemail.com"
}
],
"version": "1.9.2",
"frameworks": ["arduino","mbed","espidf"],
"platforms": "*"
}

10
src/libs/arduinoFFT-develop/library.properties Normal file
View file

@ -0,0 +1,10 @@
name=arduinoFFT
version=1.9.2
author=Enrique Condes <enrique@shapeoko.com>
maintainer=Enrique Condes <enrique@shapeoko.com>
sentence=A library for implementing floating point Fast Fourier Transform calculations on Arduino.
paragraph=With this library you can calculate the frequency of a sampled signal.
category=Data Processing
url=https://github.com/kosme/arduinoFFT
architectures=*
includes=arduinoFFT.h

1
src/libs/arduinoFFT-develop/src/.gitignore vendored Normal file
View file

@ -0,0 +1 @@
/arduinoFFT.h.gch

498
src/libs/arduinoFFT-develop/src/arduinoFFT.h Normal file
View file

@ -0,0 +1,498 @@
/*
FFT library
Copyright (C) 2010 Didier Longueville
Copyright (C) 2014 Enrique Condes
Copyright (C) 2020 Bim Overbohm (header-only, template, speed improvements)
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef ArduinoFFT_h /* Prevent loading library twice */
#define ArduinoFFT_h
#ifdef ARDUINO
#if ARDUINO >= 100
#include "Arduino.h"
#else
#include "WProgram.h" /* This is where the standard Arduino code lies */
#endif
#else
#include <stdlib.h>
#include <stdio.h>
#ifdef __AVR__
#include <avr/io.h>
#include <avr/pgmspace.h>
#endif
#include <math.h>
#include "defs.h"
#include "types.h"
#endif
// Define this to use reciprocal multiplication for division and some more speedups that might decrease precision
//#define FFT_SPEED_OVER_PRECISION
// Define this to use a low-precision square root approximation instead of the regular sqrt() call
// This might only work for specific use cases, but is significantly faster. Only works for ArduinoFFT<float>.
//#define FFT_SQRT_APPROXIMATION
#ifdef FFT_SQRT_APPROXIMATION
#include <type_traits>
#else
#define sqrt_internal sqrtf
#endif
enum class FFTDirection
{
Reverse,
Forward
};
enum class FFTWindow
{
Rectangle, // rectangle (Box car)
Hamming, // hamming
Hann, // hann
Triangle, // triangle (Bartlett)
Nuttall, // nuttall
Blackman, //blackman
Blackman_Nuttall, // blackman nuttall
Blackman_Harris, // blackman harris
Flat_top, // flat top
Welch // welch
};
template <typename T>
class ArduinoFFT
{
public:
// Constructor
ArduinoFFT(T *vReal, T *vImag, uint_fast16_t samples, T samplingFrequency, T *windowWeighingFactors = nullptr)
: _vReal(vReal)
, _vImag(vImag)
, _samples(samples)
#ifdef FFT_SPEED_OVER_PRECISION
, _oneOverSamples(1.0 / samples)
#endif
, _samplingFrequency(samplingFrequency)
, _windowWeighingFactors(windowWeighingFactors)
{
// Calculates the base 2 logarithm of sample count
_power = 0;
while (((samples >> _power) & 1) != 1)
{
_power++;
}
}
// Destructor
~ArduinoFFT()
{
}
// Get library revision
static uint8_t revision()
{
return 0x19;
}
// Replace the data array pointers
void setArrays(T *vReal, T *vImag)
{
_vReal = vReal;
_vImag = vImag;
}
// Computes in-place complex-to-complex FFT
void compute(FFTDirection dir) const
{
// Reverse bits /
uint_fast16_t j = 0;
for (uint_fast16_t i = 0; i < (this->_samples - 1); i++)
{
if (i < j)
{
Swap(this->_vReal[i], this->_vReal[j]);
if (dir == FFTDirection::Reverse)
{
Swap(this->_vImag[i], this->_vImag[j]);
}
}
uint_fast16_t k = (this->_samples >> 1);
while (k <= j)
{
j -= k;
k >>= 1;
}
j += k;
}
// Compute the FFT
#ifdef __AVR__
uint_fast8_t index = 0;
#endif
T c1 = -1.0;
T c2 = 0.0;
uint_fast16_t l2 = 1;
for (uint_fast8_t l = 0; (l < this->_power); l++)
{
uint_fast16_t l1 = l2;
l2 <<= 1;
T u1 = 1.0;
T u2 = 0.0;
for (j = 0; j < l1; j++)
{
for (uint_fast16_t i = j; i < this->_samples; i += l2)
{
uint_fast16_t i1 = i + l1;
T t1 = u1 * this->_vReal[i1] - u2 * this->_vImag[i1];
T t2 = u1 * this->_vImag[i1] + u2 * this->_vReal[i1];
this->_vReal[i1] = this->_vReal[i] - t1;
this->_vImag[i1] = this->_vImag[i] - t2;
this->_vReal[i] += t1;
this->_vImag[i] += t2;
}
T z = ((u1 * c1) - (u2 * c2));
u2 = ((u1 * c2) + (u2 * c1));
u1 = z;
}
#ifdef __AVR__
c2 = pgm_read_float_near(&(_c2[index]));
c1 = pgm_read_float_near(&(_c1[index]));
index++;
#else
T cTemp = 0.5 * c1;
c2 = sqrt_internal(0.5 - cTemp);
c1 = sqrt_internal(0.5 + cTemp);
#endif
c2 = dir == FFTDirection::Forward ? -c2 : c2;
}
// Scaling for reverse transform
if (dir != FFTDirection::Forward)
{
for (uint_fast16_t i = 0; i < this->_samples; i++)
{
#ifdef FFT_SPEED_OVER_PRECISION
this->_vReal[i] *= _oneOverSamples;
this->_vImag[i] *= _oneOverSamples;
#else
this->_vReal[i] /= this->_samples;
this->_vImag[i] /= this->_samples;
#endif
}
}
}
void complexToMagnitude() const
{
// vM is half the size of vReal and vImag
for (uint_fast16_t i = 0; i < this->_samples; i++)
{
this->_vReal[i] = sqrt_internal(sq(this->_vReal[i]) + sq(this->_vImag[i]));
}
}
void dcRemoval() const
{
// calculate the mean of vData
T mean = 0;
for (uint_fast16_t i = 1; i < ((this->_samples >> 1) + 1); i++)
{
mean += this->_vReal[i];
}
mean /= this->_samples;
// Subtract the mean from vData
for (uint_fast16_t i = 1; i < ((this->_samples >> 1) + 1); i++)
{
this->_vReal[i] -= mean;
}
}
void windowing(FFTWindow windowType, FFTDirection dir, bool withCompensation = false)
{
// check if values are already pre-computed for the correct window type and compensation
if (_windowWeighingFactors && _weighingFactorsComputed &&
_weighingFactorsFFTWindow == windowType &&
_weighingFactorsWithCompensation == withCompensation)
{
// yes. values are precomputed
if (dir == FFTDirection::Forward)
{
for (uint_fast16_t i = 0; i < (this->_samples >> 1); i++)
{
this->_vReal[i] *= _windowWeighingFactors[i];
this->_vReal[this->_samples - (i + 1)] *= _windowWeighingFactors[i];
}
}
else
{
for (uint_fast16_t i = 0; i < (this->_samples >> 1); i++)
{
#ifdef FFT_SPEED_OVER_PRECISION
// on many architectures reciprocals and multiplying are much faster than division
T oneOverFactor = 1.0 / _windowWeighingFactors[i];
this->_vReal[i] *= oneOverFactor;
this->_vReal[this->_samples - (i + 1)] *= oneOverFactor;
#else
this->_vReal[i] /= _windowWeighingFactors[i];
this->_vReal[this->_samples - (i + 1)] /= _windowWeighingFactors[i];
#endif
}
}
}
else
{
// no. values need to be pre-computed or applied
T samplesMinusOne = (T(this->_samples) - 1.0);
T compensationFactor = _WindowCompensationFactors[static_cast<uint_fast8_t>(windowType)];
for (uint_fast16_t i = 0; i < (this->_samples >> 1); i++)
{
T indexMinusOne = T(i);
T ratio = (indexMinusOne / samplesMinusOne);
T weighingFactor = 1.0;
// Compute and record weighting factor
switch (windowType)
{
case FFTWindow::Rectangle: // rectangle (box car)
weighingFactor = 1.0;
break;
case FFTWindow::Hamming: // hamming
weighingFactor = 0.54 - (0.46 * cos(TWO_PI * ratio));
break;
case FFTWindow::Hann: // hann
weighingFactor = 0.54 * (1.0 - cos(TWO_PI * ratio));
break;
case FFTWindow::Triangle: // triangle (Bartlett)
weighingFactor = 1.0 - ((2.0 * abs(indexMinusOne - (samplesMinusOne / 2.0))) / samplesMinusOne);
break;
case FFTWindow::Nuttall: // nuttall
weighingFactor = 0.355768 - (0.487396 * (cos(TWO_PI * ratio))) + (0.144232 * (cos(FOUR_PI * ratio))) - (0.012604 * (cos(SIX_PI * ratio)));
break;
case FFTWindow::Blackman: // blackman
weighingFactor = 0.42323 - (0.49755 * (cos(TWO_PI * ratio))) + (0.07922 * (cos(FOUR_PI * ratio)));
break;
case FFTWindow::Blackman_Nuttall: // blackman nuttall
weighingFactor = 0.3635819 - (0.4891775 * (cos(TWO_PI * ratio))) + (0.1365995 * (cos(FOUR_PI * ratio))) - (0.0106411 * (cos(SIX_PI * ratio)));
break;
case FFTWindow::Blackman_Harris: // blackman harris
weighingFactor = 0.35875 - (0.48829 * (cos(TWO_PI * ratio))) + (0.14128 * (cos(FOUR_PI * ratio))) - (0.01168 * (cos(SIX_PI * ratio)));
break;
case FFTWindow::Flat_top: // flat top
weighingFactor = 0.2810639 - (0.5208972 * cos(TWO_PI * ratio)) + (0.1980399 * cos(FOUR_PI * ratio));
break;
case FFTWindow::Welch: // welch
weighingFactor = 1.0 - sq((indexMinusOne - samplesMinusOne / 2.0) / (samplesMinusOne / 2.0));
break;
}
if (withCompensation)
{
weighingFactor *= compensationFactor;
}
if (_windowWeighingFactors)
{
_windowWeighingFactors[i] = weighingFactor;
}
if (dir == FFTDirection::Forward)
{
this->_vReal[i] *= weighingFactor;
this->_vReal[this->_samples - (i + 1)] *= weighingFactor;
}
else
{
#ifdef FFT_SPEED_OVER_PRECISION
// on many architectures reciprocals and multiplying are much faster than division
T oneOverFactor = 1.0 / weighingFactor;
this->_vReal[i] *= oneOverFactor;
this->_vReal[this->_samples - (i + 1)] *= oneOverFactor;
#else
this->_vReal[i] /= weighingFactor;
this->_vReal[this->_samples - (i + 1)] /= weighingFactor;
#endif
}
}
// mark cached values as pre-computed
_weighingFactorsFFTWindow = windowType;
_weighingFactorsWithCompensation = withCompensation;
_weighingFactorsComputed = true;
}
}
T majorPeak() const
{
T maxY = 0;
uint_fast16_t IndexOfMaxY = 0;
//If sampling_frequency = 2 * max_frequency in signal,
//value would be stored at position samples/2
for (uint_fast16_t i = 1; i < ((this->_samples >> 1) + 1); i++)
{
if ((this->_vReal[i - 1] < this->_vReal[i]) && (this->_vReal[i] > this->_vReal[i + 1]))
{
if (this->_vReal[i] > maxY)
{
maxY = this->_vReal[i];
IndexOfMaxY = i;
}
}
}
T delta = 0.5 * ((this->_vReal[IndexOfMaxY - 1] - this->_vReal[IndexOfMaxY + 1]) / (this->_vReal[IndexOfMaxY - 1] - (2.0 * this->_vReal[IndexOfMaxY]) + this->_vReal[IndexOfMaxY + 1]));
T interpolatedX = ((IndexOfMaxY + delta) * this->_samplingFrequency) / (this->_samples - 1);
if (IndexOfMaxY == (this->_samples >> 1))
{
//To improve calculation on edge values
interpolatedX = ((IndexOfMaxY + delta) * this->_samplingFrequency) / (this->_samples);
}
// returned value: interpolated frequency peak apex
return interpolatedX;
}
void majorPeak(T &frequency, T &value) const
{
T maxY = 0;
uint_fast16_t IndexOfMaxY = 0;
//If sampling_frequency = 2 * max_frequency in signal,
//value would be stored at position samples/2
for (uint_fast16_t i = 1; i < ((this->_samples >> 1) + 1); i++)
{
if ((this->_vReal[i - 1] < this->_vReal[i]) && (this->_vReal[i] > this->_vReal[i + 1]))
{
if (this->_vReal[i] > maxY)
{
maxY = this->_vReal[i];
IndexOfMaxY = i;
}
}
}
T delta = 0.5 * ((this->_vReal[IndexOfMaxY - 1] - this->_vReal[IndexOfMaxY + 1]) / (this->_vReal[IndexOfMaxY - 1] - (2.0 * this->_vReal[IndexOfMaxY]) + this->_vReal[IndexOfMaxY + 1]));
T interpolatedX = ((IndexOfMaxY + delta) * this->_samplingFrequency) / (this->_samples - 1);
if (IndexOfMaxY == (this->_samples >> 1))
{
//To improve calculation on edge values
interpolatedX = ((IndexOfMaxY + delta) * this->_samplingFrequency) / (this->_samples);
}
// returned value: interpolated frequency peak apex
frequency = interpolatedX;
value = abs(this->_vReal[IndexOfMaxY - 1] - (2.0 * this->_vReal[IndexOfMaxY]) + this->_vReal[IndexOfMaxY + 1]);
}
private:
#ifdef __AVR__
static const float _c1[] PROGMEM;
static const float _c2[] PROGMEM;
#endif
static const T _WindowCompensationFactors[10];
// Mathematial constants
#ifndef TWO_PI
static constexpr T TWO_PI = 6.28318531; // might already be defined in Arduino.h
#endif
static constexpr T FOUR_PI = 12.56637061;
static constexpr T SIX_PI = 18.84955593;
static inline void Swap(T &x, T &y)
{
T temp = x;
x = y;
y = temp;
}
#ifdef FFT_SQRT_APPROXIMATION
// Fast inverse square root aka "Quake 3 fast inverse square root", multiplied by x.
// Uses one iteration of Halley's method for precision.
// See: https://en.wikipedia.org/wiki/Methods_of_computing_square_roots#Iterative_methods_for_reciprocal_square_roots
// And: https://github.com/HorstBaerbel/approx
template <typename V = T>
static inline V sqrt_internal(typename std::enable_if<std::is_same<V, float>::value, V>::type x)
{
union // get bits for float value
{
float x;
int32_t i;
} u;
u.x = x;
u.i = 0x5f375a86 - (u.i >> 1); // gives initial guess y0.
float xu = x * u.x;
float xu2 = xu * u.x;
u.x = (0.125 * 3.0) * xu * (5.0 - xu2 * ((10.0 / 3.0) - xu2)); // Halley's method, repeating increases accuracy
return u.x;
}
template <typename V = T>
static inline V sqrt_internal(typename std::enable_if<std::is_same<V, double>::value, V>::type x)
{
// According to HosrtBaerbel, on the ESP32 the approximation is not faster, so we use the standard function
#ifdef ESP32
return sqrt(x);
#else
union // get bits for float value
{
double x;
int64_t i;
} u;
u.x = x;
u.i = 0x5fe6ec85e7de30da - (u.i >> 1); // gives initial guess y0.
double xu = x * u.x;
double xu2 = xu * u.x;
u.x = (0.125 * 3.0) * xu * (5.0 - xu2 * ((10.0 / 3.0) - xu2)); // Halley's method, repeating increases accuracy
return u.x;
#endif
}
#endif
/* Variables */
T *_vReal = nullptr;
T *_vImag = nullptr;
uint_fast16_t _samples = 0;
#ifdef FFT_SPEED_OVER_PRECISION
T _oneOverSamples = 0.0;
#endif
T _samplingFrequency = 0;
T *_windowWeighingFactors = nullptr;
FFTWindow _weighingFactorsFFTWindow;
bool _weighingFactorsWithCompensation = false;
bool _weighingFactorsComputed = false;
uint_fast8_t _power = 0;
};
#ifdef __AVR__
template <typename T>
const float ArduinoFFT<T>::_c1[] PROGMEM = {
0.0000000000, 0.7071067812, 0.9238795325, 0.9807852804,
0.9951847267, 0.9987954562, 0.9996988187, 0.9999247018,
0.9999811753, 0.9999952938, 0.9999988235, 0.9999997059,
0.9999999265, 0.9999999816, 0.9999999954, 0.9999999989,
0.9999999997};
template <typename T>
const float ArduinoFFT<T>::_c2[] PROGMEM = {
1.0000000000, 0.7071067812, 0.3826834324, 0.1950903220,
0.0980171403, 0.0490676743, 0.0245412285, 0.0122715383,
0.0061358846, 0.0030679568, 0.0015339802, 0.0007669903,
0.0003834952, 0.0001917476, 0.0000958738, 0.0000479369,
0.0000239684};
#endif
template <typename T>
const T ArduinoFFT<T>::_WindowCompensationFactors[10] = {
1.0000000000 * 2.0, // rectangle (Box car)
1.8549343278 * 2.0, // hamming
1.8554726898 * 2.0, // hann
2.0039186079 * 2.0, // triangle (Bartlett)
2.8163172034 * 2.0, // nuttall
2.3673474360 * 2.0, // blackman
2.7557840395 * 2.0, // blackman nuttall
2.7929062517 * 2.0, // blackman harris
3.5659039231 * 2.0, // flat top
1.5029392863 * 2.0 // welch
};
#endif

90
src/libs/arduinoFFT-develop/src/defs.h Normal file
View file

@ -0,0 +1,90 @@
/*! \file avrlibdefs.h \brief AVRlib global defines and macros. */
//*****************************************************************************
//
// File Name : 'avrlibdefs.h'
// Title : AVRlib global defines and macros include file
// Author : Pascal Stang
// Created : 7/12/2001
// Revised : 9/30/2002
// Version : 1.1
// Target MCU : Atmel AVR series
// Editor Tabs : 4
//
// Description : This include file is designed to contain items useful to all
// code files and projects, regardless of specific implementation.
//
// This code is distributed under the GNU Public License
// which can be found at http://www.gnu.org/licenses/gpl.txt
//
//*****************************************************************************
#ifndef AVRLIBDEFS_H
#define AVRLIBDEFS_H
//#define F_CPU 4000000
#define MEM_TYPE 1
// Code compatibility to new AVR-libc
// outb(), inb(), inw(), outw(), BV(), sbi(), cbi(), sei(), cli()
#ifndef outb
#define outb(addr, data) addr = (data)
#endif
#ifndef inb
#define inb(addr) (addr)
#endif
#ifndef outw
#define outw(addr, data) addr = (data)
#endif
#ifndef inw
#define inw(addr) (addr)
#endif
#ifndef BV
#define BV(bit) (1<<(bit))
#endif
//#ifndef cbi
// #define cbi(reg,bit) reg &= ~(BV(bit))
//#endif
//#ifndef sbi
// #define sbi(reg,bit) reg |= (BV(bit))
//#endif
#ifndef cli
#define cli() __asm__ __volatile__ ("cli" ::)
#endif
#ifndef sei
#define sei() __asm__ __volatile__ ("sei" ::)
#endif
// support for individual port pin naming in the mega128
// see port128.h for details
#ifdef __AVR_ATmega128__
// not currently necessary due to inclusion
// of these defines in newest AVR-GCC
// do a quick test to see if include is needed
#ifndef PD0
//#include "port128.h"
#endif
#endif
// use this for packed structures
// (this is seldom necessary on an 8-bit architecture like AVR,
// but can assist in code portability to AVR)
#define GNUC_PACKED __attribute__((packed))
// port address helpers
#define DDR(x) ((x)-1) // address of data direction register of port x
#define PIN(x) ((x)-2) // address of input register of port x
// MIN/MAX/ABS macros
#define MIN(a,b) ((a<b)?(a):(b))
#define MAX(a,b) ((a>b)?(a):(b))
#define ABS(x) ((x>0)?(x):(-x))
// constants
#define PI 3.14159265359
//Math
#define sq(x) ((x)*(x))
#define constrain(amt,low,high) ((amt)<(low)?(low):((amt)>(high)?(high):(amt)))
#endif

69
src/libs/arduinoFFT-develop/src/types.h Normal file
View file

@ -0,0 +1,69 @@
//useful things to include in code
#ifndef TYPES_H
#define TYPES_H
#ifndef WIN32
// true/false defines
#define FALSE 0
#define TRUE -1
#endif
// datatype definitions macros
typedef unsigned char u08;
typedef signed char s08;
typedef unsigned short u16;
typedef signed short s16;
typedef unsigned long u32;
typedef signed long s32;
typedef unsigned long long u64;
typedef signed long long s64;
// #ifndef __AVR__
#ifdef __MBED__
// use inttypes.h instead
// C99 standard integer type definitions
typedef unsigned char uint8_t;
typedef signed char int8_t;
typedef unsigned short uint16_t;
typedef signed short int16_t;
/*typedef unsigned long uint32_t;
typedef signed long int32_t;
typedef unsigned long uint64_t;
typedef signed long int64_t;
*/
#endif
// maximum value that can be held
// by unsigned data types (8,16,32bits)
#define MAX_U08 255
#define MAX_U16 65535
#define MAX_U32 4294967295
// maximum values that can be held
// by signed data types (8,16,32bits)
#define MIN_S08 -128
#define MAX_S08 127
#define MIN_S16 -32768
#define MAX_S16 32767
#define MIN_S32 -2147483648
#define MAX_S32 2147483647
#ifndef WIN32
// more type redefinitions
typedef unsigned char BOOL;
typedef unsigned char BYTE;
typedef unsigned int WORD;
typedef unsigned long DWORD;
typedef unsigned char UCHAR;
typedef unsigned int UINT;
typedef unsigned short USHORT;
typedef unsigned long ULONG;
typedef char CHAR;
typedef int INT;
typedef long LONG;
#endif
#endif